freeflow

  • Precipitated silica Matting agents are high-performance silica developed for gloss reduction in a vast range of applications for a vast range of applications. Absorbent for ink jet paper coatings Can be used in the production of defoamers Over 20 products ranging from 2 microns to 12 microns, with surface areas from 180 to 290 m2/g The line contains a variety of products differing in surface area, particle size, and oil absorption. These matting agents are perfectly suited for wood coatings including floor, furniture and cabinet coatings. They provide the best in efficiency, clarity, and in-can stability, while allowing for good flow and leveling.
    • Good choice in both waterborne or solvent systems
    • Recommended for for UV Coatings Applications
    • Matting agents with high clarity and less impact on viscosity
    • Matting agents for Coil Coatings Applications
    • Matting agents for Low VOC Coatings Applications
  • Precipitated silica Carrier, Free Flow Agent Food, battery separator Over 20 products ranging from 6 microns to 21 microns For food applications OSC has Halal certification and Kosher certification. Application examples: Food and Feed: Seasonings, Spices, Herbs, Sugar, Salt, Mineral mixes and Limestone Agrochemicals: Wettable powders Characteristics: Good flowability and anti-caking behavior of the milled powder
    • reduces the caking of low melting powders.
    • absorbs promptly any released liquid.
    • avoids clogging of the mill and decreases the shutdown times.
    • improves the free fl owing and anti-caking properties.
    • reduces time and cost consuming maintenance intervals.
    • increases the throughput by longer operation times.
     
  • Precipitated silica Carrier, Free Flow Agent Food, battery separator Over 20 products ranging from 6 microns to 21 microns For food applications OSC has Halal certification and Kosher certification. Application examples: Food and Feed: Seasonings, Spices, Herbs, Sugar, Salt, Mineral mixes and Limestone Agrochemicals: Wettable powders Characteristics: Good flowability and anti-caking behavior of the milled powder
    • reduces the caking of low melting powders.
    • absorbs promptly any released liquid.
    • avoids clogging of the mill and decreases the shutdown times.
    • improves the free fl owing and anti-caking properties.
    • reduces time and cost consuming maintenance intervals.
    • increases the throughput by longer operation times.
     
  • Precipitated silica Carrier, Free Flow Agent Food, battery separator Over 20 products ranging from 6 microns to 21 microns For food applications OSC has Halal certification and Kosher certification. Application examples: Food and Feed: Seasonings, Spices, Herbs, Sugar, Salt, Mineral mixes and Limestone Agrochemicals: Wettable powders Characteristics: Good flowability and anti-caking behavior of the milled powder
    • reduces the caking of low melting powders.
    • absorbs promptly any released liquid.
    • avoids clogging of the mill and decreases the shutdown times.
    • improves the free fl owing and anti-caking properties.
    • reduces time and cost consuming maintenance intervals.
    • increases the throughput by longer operation times.
     
  • Fumed silica rheology additive, treated Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.      
  • Fumed silica, treated, rheology additive Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • Fumed silica rheology additive Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • Fumed silica, untreated Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • Fumed silica untreated Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • Fumed silica matting agent Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • Precipitated silica Filler Reinforcing agent New generation “High Dispersible Silica” (HDS silica) For food applications OSC has Halal and Kosher certification. Rolling Resistance and Wet Traction:
    • Overcome the difficulties of improving wet traction and rolling resistance for rubber industry. Cooperate with appropriate polymers and silane coupling agents, increasing wet traction/ - Reducing rolling resistance
    • Better fuel efficiency in high performance
    • PCR and TBR tires
    • Free flow additive
    • Carrier additive applications for the food and industrial powders
    • Over 20 products ranging from 9 microns to 250 microns, with surface areas from 90 to 200 m2/g
  • Filler Reinforcing agent New generation “High Dispersible Silica” (HDS silica) For food applications OSC has Halal and Kosher certification. Rolling Resistance and Wet Traction:
    • Overcome the difficulties of improving wet traction and rolling resistance for rubber industry. Cooperate with appropriate polymers and silane coupling agents, increasing wet traction/ - Reducing rolling resistance
    • Better fuel efficiency in high performance
    • PCR and TBR tires
    • Free flow additive
    • Carrier additive applications for the food and industrial powders
    • Over 20 products ranging from 9 microns to 250 microns, with surface areas from 90 to 200 m2/g

Title