Resin

  • A DADMAC quaternary ammonium chloride which can form linear homopolymers and copolymers through different reactions.  At room temp, DADMAC is stable, does not hydrolyze and is not flammable.  It exhibits low toxicity and is not reactive with skin.  This product does not contain sodium chloride. DADMAC is diallyl dimethyl ammonium chloride with a CAS # 7398-69-8  
  • Suitable for a variety of applications:
    • CASE and foam markets
    • one and two component systems
    • ambient, moisture and heat cured systems n building block for prepolymers
    Branced polyester/polyether polyol Offset Desmophen 1145 and Sovermol 815 Benefits:
    • Excellent water and moisture resistance
    • Excellent acid and alkali resistance
    • Very good hydrolytic stability
    • Fire and thermal resistance
    • Can be tailored for different properties
    • Available in low to high functionalities
  • Cardolite NX-9005 is a unique polyol suitable for polyurethane coatings and adhesives. This product has well balanced mechanical properties, high tensile strength and excellent elongation. Non-CNSL Branched Polyol - good UV resistance. Offset Desmophen 1150 and Sovermol 805/1080
  • Cardolite NX-202x products are low viscosity multipurpose resin modifiers. The long hydrophobic aliphatic side chain of the cardanol molecule gives these products a very low viscosity and provides excellent early water resistance and corrosion protection. By using NX-202x products as epoxy diluents and accelerators, high solids or solvent free formulations can be achieved with enhanced workability and faster cure without sacrificing other performance properties. In addition, the flexibility of the side chain helps increase impact resistance of the final coating. Different Grades Available. NX-2023 can replace nonyl phenol.  NX 2023 is non toxic,exhibits higher visc reduction, does not reduce gel time like NP, and shows improved water resistance. These products are a good alternative to synthetic phenolic diluents that have unfavorable labeling.
  • Cardolite NT-1300 is an tertiary amine catalyst. Offset to Ancamine k54.
  • A soft, aliphatic, polycarbonate-based, polyurethane dispersion. HD-2501 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:
    • Maximum hydrolytic stability and oxidation resistance
    • Outstanding toughness and abrasion resistance
    • Good water and chemical resistance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent
  • Co-solvent free, soft, aliphatic, water-borne, polyurethane dispersion. HD-2024 was designed for use as a cost effective urethane for use in coatings or finishes for textile fabrics. This unique urethane dispersion is manufactured at high solids and without the use of solvent. HD-2024 is well suited for use as a strength additive for acrylic polymers. Whether used alone or as a strength additive, HD-2024 provides increased strength, anti-fray, and abrasion resistance properties at an affordable price.     CHARACTERISTICS:
    • Co-solvent free and high solids
    • Excellent cost/performance ratio
    • Soft, tough, flexible, dry film
    • Excellent UV resistance
    • Excellent low temperature flexibility and crack resistance
    • Very good abrasion resistance
  • A low cost, aromatic, polyether-based, aqueous polyurethane dispersion. HD-3011 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance.   CHARACTERISTICS:
    • Medium soft, tough, flexible film
    • Unusually dry surface for non-blocking applications
    • High melting for thermal stability
    • Can be crosslinked with melamines or aziridines for true thermoset character and increased adhesion.
    • Excellent hydrolytic stability
    • Contains n-methyl pyrrolidone (NMP) co-solvent
  • Ultra-soft, aliphatic, water-borne urethane dispersion. HD-4670 was designed for use in textile applications that require an ultra-soft hand coupled with good strength, abrasion resistance, and excellent resiliency. Due to its overall properties, HD-4670 can be used as a finish or a coating. This versatile urethane is ideally suited for use as an anti-fray finish on textile fabrics that must have an ultra-soft hand. HD-4670 is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance. The extremely low melt temperature also allows HD-4670 to be used as a heat sealable coating.   Characteristics:
    • Superior flexibility
    • Ultra-soft, resilient, flexible, film
    • Excellent UV-resistance
    • Good abrasion resistance
    • Superior low temperature, flex-crack resistance
    • Low melting point (240°F)
  • Soft, aliphatic, water-borne, polyurethane dispersion. HD-4638 was designed for use in textile applications as a versatile polyurethane coating. Due to its overall properties, HD-4638 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. HD-4638 is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance Characteristics:
    • Superior flexibility
    • Soft, tough, flexible, dry film
    • Excellent UV resistance
    • Very good abrasion resistance
    • Superior low temperature flexibility and crack resistance
    • High melting point (320°F)
    • Good strength properties
  • A soft, matte finish, aliphatic, polyurethane dispersion HD-4626 can be used as a companion dulling agent for basecoat and topcoat formulas on full-grain, corrected, and split leathers. HD-4626 is particularly useful where the break of the leather is a concern.   Characteristics:
    • Produces a soft, tough, dull film
    • Crosslink-able for improved chemical resistance
    • Outstanding flexibility
    • Good spraying characteristics
    • Low tack for good pile down and plate-ability
  • A formulated, aliphatic, polyurethane topcoat which produces a soft, slick feel at low gloss levels. Suggested Uses: Hauthane HD-3830 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
    • Soft, slick feel
    • Low gloss
    • Can be crosslinked to enhance performance
    • Forms a film at room temperature
    • Low VOC: <50 g/l less water
  • A formulated, aliphatic, polyurethane topcoat which produces a soft, silky feel at low gloss levels. Suggested Uses: Hauthane HD-3820 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
    • Soft, silky feel
    • Low gloss
    • Can be crosslinked to enhance performance
    • Forms a film at room temperature
    • Low VOC: <50 g/l less water
  • An aliphatic, polyurethane topcoat which produces a soft, rubbery feel at low gloss levels. Suggested Uses: Hauthane HD-3810 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
    • Soft, rubbery/grabby feel
    • Inherently low gloss without the use of external flatteners Silicone-free
    • Can be crosslinked to enhance performance
    • Forms a film at room temperature
    • Low VOC: <50 g/l less water
  • Medium hard, non-ionic, aliphatic, polyester-based polyurethane dispersion from Hauthaway. L-3632 was designed for use in fiberglass sizing applications that require very good strength, abrasion-resistance and adhesion.   CHARACTERISTICS
    • TEA-free, pyrrolidone-free, APEO-free
    • Forms medium hard, tough, flexible films
    • Good abrasion resistance
    • Superior, low temperature flex-crack resistance
    • Contains dipropylene glycol monomethyl ether
  • A hard, co-solvent free, aliphatic, polyester polyurethane dispersion from Hauthaway. L-3615 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. It may also be used as a blending resin with the softer L-3614 to impart greater film flexibility. A balanced composition provides good stability with acrylics and confers superior strength, abrasion resistance and low temperature flexibility properties.   CHARACTERISTICS
    • Co-solvent free, TEA free, Tin free, APEO free
    • Medium hard, tough, dry film
    • Excellent water and chemical resistance
    • Superior abrasion resistance
    • Good adhesion to a wide variety of substrates
     
  • A very soft, co-solvent free, aliphatic, polyester polyurethane dispersion from Hauthaway. L-3614 was designed for use in applications that require an ultra-soft hand coupled with good strength, abrasion resistance, and excellent resiliency. It may be used as a blending resin with the harder L-3615 to impart increased toughness. A balanced composition provides good stability with acrylics and confers superior strength, abrasion resistance and low temperature flexibility properties.   CHARACTERISTICS
    • Co-solvent free, TEA free, Tin free, APEO free
    • Ultra soft, tough, dry film
    • Very good abrasion and UV resistance
    • Exceptional low temperature flexibility and crack resistance
     
  • A soft, co-solvent free, aliphatic, polycarbonate-based polyurethane dispersion from Hauthaway. L-3529 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. It may be blended with L-3528 to increase hardness.   CHARACTERISTICS
    • Maximum hydrolytic stability and oxidation resistance
    • Outstanding toughness and abrasion-resistance
    • Good water and chemical resistance
    • Can be crosslinked to enhance performance
    • Co-solvent free, tin-free, APEO-free.
    L- 3529 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-roll or similar methods.
  • A soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion from Hauthaway. L-3121 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS
    • Maximum hydrolytic stability and oxidation resistance Outstanding toughness and abrasion resistance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent
  • An aliphatic, APEO-free, co-solvent free, polyether-based, polyurethane dispersion from Hauthaway. L-3037 was designed for base coats or intermediate coats intended for plating/embossing. Films based on this polymer exhibit excellent print retention properties. CHARACTERISTICS
    • Excellent print retention properties
    • Contains no co-solvent
    • Produces soft, tough films
    • Good water and solvent-resistance for a soft polymer Dries to clear, glossy film
  • An NMP-free/APEO-free aliphatic, polyester-based, polyurethane dispersion designed to produce unequaled clarity and gloss from Hauthaway. L-3040 was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. CHARACTERISTICS
    • Wet look gloss
    • Glass-like clarity
    • Adhesion to a wide variety of substrates including wood, plastics, textiles, leather
    • Dilution and clean up with ordinary tap water
    • Contains dipropylene glycol dimethyl ether co-solvent
  • A hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675 from Hauthaway. L-3225 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS
    • Self-coalescing at temperatures above 60° F
    • Contains no co-solvent
    • Produces clear, durable films with low levels of co-solvent (<100 g/l) Excellent non-yellowing properties
    • Good water and chemical resistance
  • An aliphatic, co-solvent free, polyether-based, aqueous polyurethane dispersion from Hauthaway. L-2641 was designed for leather basecoat applications where plate-release and print retention are important. CHARACTERISTICS
    • Contains no co-solvent
    • Produces soft, tough films
    • Good water and solvent-resistance for a soft polymer Dries to clear, glossy film
    • Dilution and cleanup with water
  • An anionic, aliphatic, aqueous polyurethane dispersion from Hauthaway. L-2183 is an adhesive grade polyurethane suggested for modifying industrial laminating adhesives. L-2183 may also be used in low tack pressure sensitive applications. CHARACTERISTICS
    • Low activation temperature (200 F)
    • Can be crosslinked to improve bond strength and heat-resistance.
    • Non-crystalline nature
    • Contains n-methyl pyrrolidone co-solvent.
  • A high solids, anionic, aliphatic, aqueous polyurethane dispersion from Hauthaway. L-2255is an adhesive grade polyurethane suggested for industrial laminating applications. Suitable for bonding plasticized vinyl sheet to itself and to other substrates such as rubber, wood, cardboard and textiles. CHARACTERISTICS:
    • High solids (48%), co-solvent free
    • Can be crosslinked to improve bond strength and heat-resistance.
    • Non-crystalline nature
     
  • An anionic, aliphatic, aqueous polyurethane dispersion with a low activation temperature from Hauthaway. L-2245 is an adhesive grade polyurethane suggested for industrial laminating applications where a pre-lamination coating is applied to a substrate and then dried. Ideal for bonding plasticized vinyl sheet to itself and to other substrates such as rubber, wood, cardboard and textiles.   CHARACTERISTICS:
    • May be crosslinked for improved adhesion and heat-resistance.
    • Non-crystalline nature
    • Low level of n-methyl pyrrolidone (NMP) co-solvent (~2%)
     
  • A hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties from Hauthaway. L-2877 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
    • Balance of toughness, abrasion- and mar-resistance
    • Outstanding water and chemical resistance
    • Excellent exterior weathering performance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent
     
  • A co-solvent free, polycarbonate-based, aliphatic, polyurethane dispersion from Hauthaway. L-3528 was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. L-3528 is ideally suited for exterior applications where film durability and longevity are important considerations. CHARACTERISTICS:
    • Excellent exterior weathering durability
    • Excellent humidity resistance
    • Outstanding toughness and abrasion-resistance
    • Co-solvent free, tin-free, APEO-free
  • A soft, halogen-free, flame retardant, aliphatic, polyurethane dispersion from Hauthaway. L-3192 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This unique urethane dispersion is manufactured at high solids and without the use of solvent. Low add-on levels of L-3192 will enable synthetic fabrics to pass various FR tests including NFPA-701 and MVSS-302. L-3192 is well suited for use in textile coatings, such as automotive upholstery, that require outstanding strength and flame retardancy. Using L-3192, a coating can be formulated to pass MVSS-302 and maintain required strength properties at a much lower coating weight than conventional coatings. This results in a much softer hand and possible cost savings. CHARACTERISTICS:
    • Permanent, non-leaching flame retardancy
    • Halogen-free
    • Excellent cost/performance ratio
    • Soft, tough, flexible, dry film
    • Excellent low temperature flex crack resistance
    • Contains n-methyl pyrrolidone (NMP)
  • A partially bio-renewable resource based, NMP-free, soft, aliphatic, water-borne, polyurethane dispersion from Hauthaway. L-3360 was designed for use in textile applications as a versatile polyurethane coating. Due to its overall properties, L-3360 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. L-3360 is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance. CHARACTERISTICS:
    • 50% bio-based, renewable resource content
    • Superior flexibility
    • Produce soft, tough, flexible, dry films
    • Good UV resistance
    • Very good abrasion resistance
    • Superior low temperature flexibility and crack resistance
    • Contains n-ethyl pyrrolidone (NEP)
  • A partially, renewable resource-based, hard, aliphatic, polyester-based, aqueous polyurethane dispersion with good chemical and water-resistance properties from Hauthaway. L-3369 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3369 produces glossy films with excellent leveling properties and good stain- and chemical-resistance to a variety of household food and cleaning products. CHARACTERISTICS:
    • 42% bio-based, renewable resource content
    • Good water and chemical resistance
    • Low VOC content (<80 g/l less water)
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
  • A water-borne, UV-curable, polycarbonate-based polyurethane dispersion. Suggested Uses: L-3685 is designed for UV-cured plastic topcoat applications where exterior weathering durability, abrasion-resistant and chemical-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring. Characteristics:
    • Excellent chemical- and stain-resistance
    • Superior humidity resistance
    • Forms durable, films under ambient or force-dried conditions
    • APEO-free
    • Fast water-release properties
    • Contains n-methyl pyrrolidone (NMP) co-solvent
  • A branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion. L-2357 was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but the use of a multiple component system is neither feasible nor desirable.
    • Contains no co-solvent
    • Medium hard, tough film
    • Polymer branching improves film resistance properties
    • Dries to clear, glossy, non-discoloring film
    • Dilution and cleanup of wet material with water
  • A water-borne, UV-curable, polycarbonate-based polyurethane dispersion. L-3790 is designed for UV-cured plastic topcoat applications where exterior weathering durability, abrasion-resistant and chemical-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring. CHARACTERISTICS:
    • Excellent chemical- and stain-resistance
    • Superior humidity resistance
    • Forms durable, films under ambient or force-dried conditions
    • APEO-free
    • Fast water-release properties
    • Contains dipropylene glycol dimethylether (DMM) co-solvent
  • A self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. L-3786 employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market.
    • One-component, self-crosslinking polymer
    • High level of toughness, abrasion- and mar-resistance Outstanding water and chemical resistance
    • Excellent exterior weathering performance
    • Contains dipropylene glycol dimethylether (DMM) co-solvent
    L-3786 can be used as a sole vehicle or blended with acrylic emulsions for spray, brush or roller applications. Rheology modifications can be made with associative thickeners to optimize application properties.
  • A pyrrolidone-free, acrylic polyurethane dispersion with an exceptional balance of properties. L-3773 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3773 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.   CHARACTERISTICS: <          Excellent toughness, abrasion and mar resistance <          Good water and chemical resistance <          Excellent exterior weathering performance <          Can be crosslinked to enhance performance <          Dilution and clean-up with ordinary tap water <          Contains dipropylene glycol dimethyl ether (DMM) co-solvent  

Title