Resin

  • An acrylic polyurethane dispersion with an exceptional balance of properties. L-3728 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
    • Excellent toughness, abrasion and mar resistance
    • Good water and chemical resistance
    • Excellent exterior weathering performance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent
  • An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. L-3466was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. CHARACTERISTICS:
    • May be formulated into low surface tension coatings
    • Exceptional dye transfer resistance
    • Excellent abrasion resistance
    • Higher silicone content (~2X) than HD-2602
    • Crosslinkable for improved adhesion and performance
    • Contains n-ethyl pyrrolidone (NEP) co-solvent
  • A VOC-free, non-ionic, UV-curable polyurethane dispersion. L-3415 is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required.   CHARACTERISTICS:
    • VOC-free, APEO surfactant free
    • Non-ionic stabilization
    • Excellent chemical and stain resistance
    • Superior abrasion resistance
    • Fast water release properties
  • A self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use inhigh performance concrete and wood floor coatings. L-3155employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. CHARACTERISTICS:
    • One-component, self-crosslinkingpolymer
    • High level oftoughness, abrasion-and mar-resistance
    • Outstanding water and chemical resistance
    • Excellent exterior weathering performance
    • Contains n-methyl pyrrolidone(NMP) co-solvent
  • A hard, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, water-borne polyurethane dispersion. L-2897 was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. CHARACTERISTICS:
    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent
    • Excellent UV resistance
    • Exceptional alcohol resistance
    • Humidity resistance
    • Superior adhesion to PVC
  • A polycarbonate-based, aliphatic, water-borne polyurethane dispersion. Developed for general coatings use on wood, plastic and metal substrates. Offers exceptional resistance to hydrolysis, oxidation and UV-degradation.
  • A very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. L-2882 was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
    • Superior adhesion to PVC
    • Excellent UV resistance
    • Exceptional alcohol resistance
    • Humidity resistance
    • Contains dipropylene glycol dimethyl ether cosolvent
  • An aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. HD-2209was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. CHARACTERISTICS:
    • Wet look gloss
    • Glass-like clarity
    • Mirror like definition-of-image
    • Adhesion to a wide variety of substrates: wood, plastics, textiles
    • Dilution and clean up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent
  • An aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. HD-2139was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. CHARACTERISTICS:
    • High gloss
    • Excellent mar and wear resistance
    • Excellent resistance to staining
    • Remarkably high balance of physical properties
    • Contains n-methyl pyrrolidone (NMP) co-solvent
  • A hard, chemical-resistant, polyester-based, aliphatic, polyurethane dispersion. HD-2125was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. CHARACTERISTICS:
    • Superior adhesion to PVC
    • Excellent UV resistance
    • Exceptional alcohol resistance
    • Humidity resistance
    • Contains n-methyl pyrrolidone co-solvent
  • A very hard, aliphatic, polyester polyurethane dispersion. HD-2120was developed for use on flexible and rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
    • Superior adhesion to PVC
    • Excellent UV resistance
    • Exceptional alcohol resistance
    • Humidity resistance
    • Contains n-methyl pyrrolidone co-solvent
  • An aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. HD-2107was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
    • Extreme toughness, abrasion and mar resistance
    • Outstanding water and chemical resistance
    • Excellent exterior weathering performance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent
  • A soft. aliphatic, polyester-based, aqueous polyurethane dispersion. HD-2101 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:
    • Outstanding toughness and abrasion resistance
    • Excellent water and chemical resistance
    • Exceptionally high melting point for a medium soft polymer
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent
  • Soft, aliphatic, polyester-based, water-borne polyurethane dispersion. HD-2001was designed for use in textile applications that require a soft hand coupled with abrasion resistance, excellent adhesion and excellent resiliency. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. HD-2001is also suitable for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows HD-2001to be used as a heat-sealable coating. When properly formulated, HD-2001can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics. CHARACTERISTICS:
    • Superior flexibility
    • Soft, tough, flexible film
    • Excellent UV resistance
    • Good abrasion resistance
    • Superior low temperature, flex-crack resistance
    • Low softening point (265ºF)
  • Nonreactive resin modifier with a viscosity of ≤ 60 cPs. Color gardner of ≤ 2.
  • Nonreactive resin modifier with a viscosity of 30-115 cPs. Color gardner of ≤ 14.
  • Cardolite NT-1542 is a solvent free, medium viscosity polyamide curing agent suitable for high solids epoxy coatings and adhesive applications.

Title