-
Tytan coupling agents can enhance the dispersion of inorganic fillers in polymer systems such as PP, PE, by modifying the surface of filler particles. The content of fillers can therefore be increased, saving the cost of polymer, while maintaining the mechanical property.
-
TYTANTM Titanate Coupling & Dispersing Agent Titanate Coupling Agents are molecular bridges at the interface between inorganic filler such as CaCO3, BaSO4, graphite, carbon black, silica and metal oxide with polymer such as PP, PE, PVC, PBT, PET, ABS and rubbers. When incorporated into polymer systems, the coupling agent could improve filler loading, pigment dispersion, impact strength hence reduce embrittlement. Silane coupling agent only reacts with hydroxyl group on the filler surface via water condensation of silanol-siloxane process, therefore, it is suitable for glass, alumina hydroxide, magnesium hydroxide and metal powder etc. The advantage of titanate coupling agents is that they react not only with the hydroxyls but the free protons on the inorganic interface, which results in the formation of organic monomolecular layers on the inorganic surface forming the bonding for polymers.
-
Tetra 2-etehylhexyl titanate, a titanium alkoxide. Used as a esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tetraethyl titanate or ET is a titanium alkoxide. Tytan ET is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan PBT has polymer structure with chemical formula as TixO y(OR) 4x-y. Tytan PBT is largely used in formulating heat and corrosion resistant paints. Tytan PBT can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint contains Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dried, it can stand up to 600 oC.
-
Tytan S3 is an ethylacetoacetate titanate silane chelate used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. Tytan S3 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.
-
Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-improvement properties which makes it also very suitable to strongly improve performance properties of industrial coatings on difficult modern polymeric substrates, glass and some metals. Tytan TAA can only be used in solvent based inks and coatings.
-
Tytan TET is titanium chelate of triethanolamine and isopropyl alcohol complexes with chemical formula as (TEA)2 – Ti – (OiPr) 2. Tytan TET is water soluble titanate and can be used in a variety of applications e.g. as cross-linking agent in aqueous and non-aqueous paint, wire enamel and adhesion promoter in polyurethane system.
-
Tytan TIPT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TIPT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TIPT can also be used selectively as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TIPT is most suitable for use in the glass and glass fibre manufacturing. Tytan TIPT can only be used as an additive to solvent based products.
-
Tytan TNBT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TNBT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TNBT is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TNBT can also be used as a moisture scavenger to prolong shelf life of moisture sensitive high viscosity products. Tytan TNBT can only be used as an additive to solvent based products.
-
Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. Tytan TNBZ is mainly used as catalyst for esterification, trans-esterification and olefin polymerization (Ziegler-Natta). Tytan TNBZ is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings.
