-
Tytan TNBT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TNBT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TNBT is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TNBT can also be used as a moisture scavenger to prolong shelf life of moisture sensitive high viscosity products. Tytan TNBT can only be used as an additive to solvent based products.
-
Tetra 2-etehylhexyl titanate, a titanium alkoxide. Used as a esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan ZPN is aqueous solution of ammonia zirconium lactate and is used in paint manufacture to improve gel strength, anti-sagging, paint structuring and levelling. Tytan ZPN shall be added at the last stage after formulated paint with typical level between 0.3 ~ 1.5%. Tytan ZPN works well in the surfactant stabilized paint as well as colloid stabilized paint.
-
Special block-copolymer for wetting and dispersing in solvent & water-based primers and high filler loads. Good viscosity depresser and mattting.
-
Pigment synergist for pthalocyanine, carbon black and violet pigments. To be used in combination with a HMW dispersant. Lowers viscosity of the mill base, improves gloss, jetness & pigment stability.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Higher molecular weight compared to 4046. Improves dispersing performance, especially with carbon black pigments to provide higher jetness. First choice for high end applications such as OEM, refinish and industrial coatings.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Improved version of 4070 with no crystallizing problem and supplied in higher solids (45%). Recommended for refinish, can coatings, dispersion of transparent iron oxide and other industrial coatings and pigment concentrate preparations.
-
BTX-free modified polyurethane polymeric dispersant for solvent-based systems. Very effective in inorganic, organic pigments and carbon black dispersion preparation. Very-effective 3-dimensional steric hindrance design allows for good stability for all pigments. Very good viscosity reduction and improved color strength.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Supplied in 100% active form. Recommended for solvent-free systems where conventional wetting and dispersing agents cannot perform with organic pigments and carbon blacks. Extremely good compatibility with thermoplastic acrylic, NC and CAB. Great for ink dispersions also.
-
Fatty acid modified polyamide economical grade wetting and dispersing agent for solvent-based pigment dispersions. Designed to replace first-generation products such as 5044, 5054, 5207. Stabilizes pigments through electrical charge repulsion forces. Very effective in bentonite gel preparation. 100% active version of 5009.
-
Modified polyether polysiloxane silicone developed for high-slip applications where foam stabilization is undesirable. Good transparency, effective in all solvent-based coatings such as NC, AC, polyurethane and baking paints.
