-
Out of stockTytan AP20 is primarily designed to strongly increase adhesion of solvent based inks to a variety of plastics used for food packaging or other purposes, but also pigment distribution and heat sealing resistance are improved allowing perfect hiding power and appearance of printing on otherwise problematic substrates. Tytan AP20 however is more user-friendly as the addition of the ethanol strongly reduces the pour point and as such the possibility for crystallization at low to normal temperatures. Tytan AP20 can only be used in solvent based inks and coatings.
-
Replacement for PU catalysts, especially for tin-based catalysts like DBTL. One- and two- component polyurethane systems, e.g. for automotive refinish coatings, general industrial coatings, coil coatings formulated with blocked isocyanates. Condensation reaction in RTV silicone resins and accelerate the cross-linking process. Catalyst for PU foams.
-
Tytan coupling agents can enhance the dispersion of inorganic fillers in polymer systems such as PP, PE, by modifying the surface of filler particles. The content of fillers can therefore be increased, saving the cost of polymer, while maintaining the mechanical property.
-
Tytan ZPN is aqueous solution of ammonia zirconium lactate and is used in paint manufacture to improve gel strength, anti-sagging, paint structuring and levelling. Tytan ZPN shall be added at the last stage after formulated paint with typical level between 0.3 ~ 1.5%. Tytan ZPN works well in the surfactant stabilized paint as well as colloid stabilized paint.
-
Tytan AQZ30 is a Zirconium triethanolamine complex that readily hydrolyses in water to produce a hydroxyl zirconium chelate. This will readily crosslink with –OH and –COOH groups in solvent and aqueous systems to form strong gels and has the potential to act as an adhesion promoter. AQZ30 is an effective rheology modifier for functionalised guar derivatives for secondary and tertiary recovery of oil and gas wells. It has the ability to crosslink in both water-borne and solvent-borne coatings and provides adhesion in water-borne and solvent-borne printing inks. Compared with titanium based alkanolamines, AQZ30 offers prevention against yellowing of the polymer in use.
-
Tetra 2-etehylhexyl titanate, a titanium alkoxide. Used as a esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan PBT has polymer structure with chemical formula as TixO y(OR) 4x-y. Tytan PBT is largely used in formulating heat and corrosion resistant paints. Tytan PBT can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint contains Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dried, it can stand up to 600 oC.
-
Tytan TET is titanium chelate of triethanolamine and isopropyl alcohol complexes with chemical formula as (TEA)2 – Ti – (OiPr) 2. Tytan TET is water soluble titanate and can be used in a variety of applications e.g. as cross-linking agent in aqueous and non-aqueous paint, wire enamel and adhesion promoter in polyurethane system.
-
Tytan TNBT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TNBT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TNBT is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TNBT can also be used as a moisture scavenger to prolong shelf life of moisture sensitive high viscosity products. Tytan TNBT can only be used as an additive to solvent based products.
-
Tytan AP110 is modified from Tytan AP100, which is aiming for better compatibility with various ink formulations. Tytan AP110 is proved offering the same adhesion performance as Tytan AP100, in addition, preventing the viscosity changed during printing process.
-
Tetraethyl titanate or ET is a titanium alkoxide. Tytan ET is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
