-
Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. Tytan TNBZ is mainly used as catalyst for esterification, trans-esterification and olefin polymerization (Ziegler-Natta). Tytan TNBZ is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings.
-
Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-improvement properties which makes it also very suitable to strongly improve performance properties of industrial coatings on difficult modern polymeric substrates, glass and some metals. Tytan TAA can only be used in solvent based inks and coatings.
-
Tetraethyl titanate or ET is a titanium alkoxide. Tytan ET is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan AQ33 is used as an esterification and transesterification catalyst for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT when water content is higher. Tytan AQ33 can also be used as adhesion promoter or cross linking agent for water based coating on various surface. Suggested dosage is 0.1 ~ 1% as catalyst and 0.5 ~ 5% as cross linking agent.
-
Tytan AP110 is modified from Tytan AP100, which is aiming for better compatibility with various ink formulations. Tytan AP110 is proved offering the same adhesion performance as Tytan AP100, in addition, preventing the viscosity changed during printing process.
-
Tytan TET is titanium chelate of triethanolamine and isopropyl alcohol complexes with chemical formula as (TEA)2 – Ti – (OiPr) 2. Tytan TET is water soluble titanate and can be used in a variety of applications e.g. as cross-linking agent in aqueous and non-aqueous paint, wire enamel and adhesion promoter in polyurethane system.
-
Tytan TNBT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TNBT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TNBT is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TNBT can also be used as a moisture scavenger to prolong shelf life of moisture sensitive high viscosity products. Tytan TNBT can only be used as an additive to solvent based products.
-
Tytan AQZ30 is a Zirconium triethanolamine complex that readily hydrolyses in water to produce a hydroxyl zirconium chelate. This will readily crosslink with –OH and –COOH groups in solvent and aqueous systems to form strong gels and has the potential to act as an adhesion promoter. AQZ30 is an effective rheology modifier for functionalised guar derivatives for secondary and tertiary recovery of oil and gas wells. It has the ability to crosslink in both water-borne and solvent-borne coatings and provides adhesion in water-borne and solvent-borne printing inks. Compared with titanium based alkanolamines, AQZ30 offers prevention against yellowing of the polymer in use.
-
Tetra 2-etehylhexyl titanate, a titanium alkoxide. Used as a esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan PBT has polymer structure with chemical formula as TixO y(OR) 4x-y. Tytan PBT is largely used in formulating heat and corrosion resistant paints. Tytan PBT can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint contains Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dried, it can stand up to 600 oC.
-
Tytan coupling agents can enhance the dispersion of inorganic fillers in polymer systems such as PP, PE, by modifying the surface of filler particles. The content of fillers can therefore be increased, saving the cost of polymer, while maintaining the mechanical property.
