wetting/ dispersion

TYTAN Titanate Coupling & Dispersing Agents are molecular bridges at the interface between inorganic fillers (such as CaCO₃, BaSO₄, graphite, talc, carbon black, silica and metal oxides) and polymers (such as PP, PE, PVC, PBT, PET, ABS and rubbers). When incorporated into polymers, the coupling agent could improve filler loading, pigment dispersion, processability and composite mechanical properties to achieve the specification desired. As a comparison, silane coupling agents only reacts with hydroxyl groups on the filler surface via water condensation of silanol-siloxane process, therefore it is suitable for glass, alumina hydroxide, magnesium hydroxide etc. The advantage of titanate coupling agents is that they not only react with hydroxyls, but also the free protons on the inorganic interface, which results in the formation of organic monomolecular layers on the inorganic surface forming the bonding for polymers. Dosage is up to the property required and the filler type used is dependent on its surface area, the larger the surface area, the more Tytan titanate coupling & dispersing agent are needed. As a guide, the general dosage range is 0.2% ~ 2.0% by weight of filler.

High molecular weight dispersant with solid surface affinity groups. Gives excellent wetting to the fiberglass leading to faster wetting of resin to the fiber glass & eventually gives better bonding strength & performance in the final product.

Modified polyacrylic polymeric dispersant for water-based systems. Improved version of 4560 that gives better viscosity depression on pigments, especially carbon blacks and transparent iron oxides. More effective dispersant for colorants within water-based systems.

Fatty acid modified polyamide economical grade wetting and dispersing agent for solvent-based pigment dispersions. Designed to replace first-generation products such as 5044, 5054, 5207. Stabilizes pigments through electrical charge repulsion forces. Very effective in bentonite gel preparation. 100% active version of 5009.

Fatty acid modified polyester. Improved hydrophilicity over 6225. Yields better color strength, viscosity reduction, pigment stability and better color acceptance in water and solvent-based paints.

Modified polyurethane polymer dispersant for solvent-based systems. Perfect for inorganic pigments, especially Ti02 and matting agents. Widely used as dispersant for inorganic pigment for pigment concentrate preparation.

Modified polyurethane polymeric dispersant for solvent-based systems. Lower-cost alternative to 4046. Very good dispersing for broad range of pigments. Recommended for polyurethane, baking paint and epoxy.

Modified polyacrylic polymeric dispersant for solvent-based systems (low to high polarity including TPA). High thixotrophy resulting in higher grind viscosity compared to polyurethane-based dispersants. Improves gloss, DOI and color strength while reducing flooding & floating.

High molecular weight dispersant that is pH independent for all pigments. Can be used in resin free concentrates.  Also used for color acceptance in let down media.

Solution of acidic polyester phosphorous dispersing and wetting agent specifically designed for pure white paints in solvent-based systems. Very good viscosity reduction. Suitable for most solvent-based systems. Not suitable for air-drying ink systems.

HMW unsaturated carboxylic acid with polysiloxane wetting and dispersing agent for solvent-based systems. An effective co-grinding agent, containing polysiloxane. Can be used as a post-add to correct floating and flooding problems. Can give foam stabilizing effect due to the silicone modification.