-
Fatty acid modified polyamide economical grade wetting and dispersing agent for solvent-based pigment dispersions. Designed to replace first-generation products such as 5044, 5054, 5207. Stabilizes pigments through electrical charge repulsion forces. Very effective in bentonite gel preparation. 100% active version of 5009.
-
Modified polyether polysiloxane silicone developed for high-slip applications where foam stabilization is undesirable. Good transparency, effective in all solvent-based coatings such as NC, AC, polyurethane and baking paints.
-
Modified polyether polysiloxane silicone for solvent-based unsaturated polyester systems. (UPE) Improves leveling and promotes a smoother surface. Also suitable in UV coatings.
-
Modified polyether polysiloxane supplied at 100% active. Acts as a universal slip and leveeling agent for all solvent-based systems. Main properties include anti-crater, slip and anti-Bénard formation.
-
Modified polyether polysiloxane silicone supplied at 100% active. Strong slip with "wet feel". Recommended for UV, metal coatings and baking paints. Enhances build up appearance in refinish coatings.
-
Modified polyether polysiloxane silicone that is one of the highest slip performers of Afcona silicone based leveling agents. Low foam, good compatibility and no influence to in-can transparency. Suitable for all sb systems where high slip is required.
-
Modified polyether polysiloxane based polymer with di-hydroxyl functional groups terminated at both ends. Can be cross-linked in polyurethane systems as well as in baking paints. Very high slip and leveling.
-
More polar combination of high boiling point solvents than 3037. Promotes the flow and prevents solvent boiling problems that lead to pin holes.
-
Blends of high boiling point solvent with silicone for slip and leveling in solvent-based systems. Contains small amount of very compatible polysiloxane. Promotes the flow of the system while preventing solvent boiling problems that lead to pin holes.
-
Modified polyether polysiloxane silicone based polymer with di-hydroxyl functional groups terminated at both ends. This allows it to cross-link in polyurethane systems as well as in baking paints. Very high slip and leveling, 100% version of 3085.
-
Short-chain modified polysiloxane silicone. Recoatable, will not influence intercoat adhesion. Recommended for baking paints based on alkyd-melamine, oil-free polyesters and thermosetting acrylics. Improves hot water soaking resistance.
-
Modified polyether polysiloxane silicone with improved leveling and anti-crater performance in polyurethane and UV coatings from 3250.
-
Modified polyalkyl polysiloxane silicone with better defoaming properties than 3236 but less than 3238 in medium to high polar systems. Suitable for soam sensitive systems, such as solventless polyurethane & epoxies. Improves matting in UV.
-
Modified polyalkyl polysiloxane silicone with better defoaming than 3236 and 3239 in medium to high polar systems. Moderate slip and leveling. Some in-can haze can occur. Suitable for foam sensitive systems such as solvent-less polyurethane & epoxies, also wood coatings.
-
Modified polyalkyl polysiloxane silicone with slip, leveling and defoaming properties. Suitable for foam sensitive systems such as, solventless polyurethane, epoxy and coil coatings. Small degree of in-can haziness to clear coats. High temperature resistance to 280°C.
-
Modified polyurethane polymer dispersant for solvent-based systems. Perfect for inorganic pigments, especially Ti02 and matting agents. Widely used as dispersant for inorganic pigment for pigment concentrate preparation.
-
Modified polyurethane polymer dispersant for solvent based systems. Mainly used in preparation of pigment concentrates due to good compatibility and price advantage. Can be utilized as a dispersant in normal grinding, especially for inorganic pigments.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Universal and efficient for all pigments, including organic and carbon black. Improves dry film gloss and prevents floating/flooding.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Developed for co-grinding purposes for coil and can coatings, baking polyesters or acrylics, epoxies and polyurethane systems. Best co-grinding agent Afcona has to offer.
-
Modified polyacrylic polymeric dispersant for solvent-based systems (low to high polarity including TPA). High thixotrophy resulting in higher grind viscosity compared to polyurethane-based dispersants. Improves gloss, DOI and color strength while reducing flooding & floating.
-
Modified polyurethane polymeric dispersant for solvent-based systems. High molecular weight with very good pigment stability performance. Designed for organic reds and other difficult-to-disperse pigments. Recommended for epoxies, coil coatings, fluorocarbon coatings and other high quality applications.
-
Modified polyurethane polymeric dispersant for medium to low-polar, solvent-based systems. Suitable for can or coil coatings and polyester resin systems.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Lower-cost alternative to 4046. Very good dispersing for broad range of pigments. Recommended for polyurethane, baking paint and epoxy.
-
Solution of acidic polyester phosphorous dispersing and wetting agent specifically designed for pure white paints in solvent-based systems. Very good viscosity reduction. Suitable for most solvent-based systems. Not suitable for air-drying ink systems.
-
Universal unsaturated polyamide and acid ester salt dispersant and wetting agent for all solvent-based systems. Can be used to prepare bentointe gels. An economic replacement for 5044.
-
Acidic polyester phosphorous wetting and dispersing agent for both water and solvent-based systems. 100% active version of 5010.
-
OH-functional unsaturated modified carboxylic acid for wetting and dispersing in solvent-based systems. Designed for stabilization of all kinds of pigments in air-drying alkyds.
-
HMW unsaturated carboxylic acid wetting and dispersing agent for solvent-based systems. Silicone-free version of 5065, no foam stabilizing effect. Stronger anti-settling properties.
-
HMW unsaturated carboxylic acid with polysiloxane wetting and dispersing agent for solvent-based systems. An effective co-grinding agent, containing polysiloxane. Can be used as a post-add to correct floating and flooding problems. Can give foam stabilizing effect due to the silicone modification.
-
Unsaturated polyamide and acid ester salt universal dispersant for solvent-based systems. Can be used to prepare bentonite gels.
-
Amine rich polymer of carboxylic acid and polyamide dispersing agent for carbon blacks and organic pigments. Specifically for artificial leather, polyurethane, alkyd, polyamide and printing ink systems.
-
Alkylol ammonium salt of a HMW carboxylic acid wetting and dispersing agent for water and solvent-based systems. Very good anti-settling effect. Extremely suitable for wash primers.
-
Polymer with pigment affinity groups suitable for all solvent-based systems ranging from low to high polar, including air dry alkyd. Very good pigment stability, good viscosity and high color strength. Supplied as a 100% dispersant, making it an excellent dispersant for polyurethane, epoxy and UV coatings.
-
Cationic/anionic co-polymer with pigment affinity groups for wetting and dispersing in solvent-based systems. Improved version of 5207 with broader resin compatibility. Offers near-HMWD performance at a price point closer to conventional agents.
-
HMW carboxylic acid polymer for wetting and dispersing in solvent-based systems. Suitable to stabilize transparent iron oxide pigments. Can be used as a dispersant for other inorganic pigments and extenders to reduce the dispersion viscosity, making it useful in highly filled systems.
-
Unsaturated polyamide and acid ester salt for wetting and dispersing in solvent-based systems.
