-
Out of stockA potassium salt of an organic phosphate ester used as a hydrotrope for acid and alkaline systems where low foam is desirable. Soluble in water, alcohols and glycols. It is insoluble in oils and solvents.
-
Out of stockTytan AP20 is primarily designed to strongly increase adhesion of solvent based inks to a variety of plastics used for food packaging or other purposes, but also pigment distribution and heat sealing resistance are improved allowing perfect hiding power and appearance of printing on otherwise problematic substrates. Tytan AP20 however is more user-friendly as the addition of the ethanol strongly reduces the pour point and as such the possibility for crystallization at low to normal temperatures. Tytan AP20 can only be used in solvent based inks and coatings.
-
Silicone modified polysiloxane defoamer and deaerator for solvent-based systems. Uses included polyurethane, baking paints and curtain coating applications.
-
Non-silicone defoamer for water-based systems. Best used in pigment paste preparation with excellent high-shear resistance.
-
Non-silicone polymer defoamer for solvent-based and solvent-free systems of epoxy, polyurethane, UPE and UV coatings.
-
Modified polysiloxane silicone based defoamer and deaerator for solvent-based systems. Suitable for high solid & high viscosity systems. (polyurethane and epoxy flooring)
-
Modified polysiloxane silicone-based defoamer and deaerator for UV coatings. The defoamer is to be dissolved in a reactive solvent (HEA).
-
Silicone-based modified polysiloxane defoamer and deaerator for solvent-based systems. Best suitable for medium to high polar systems such as epoxy, TPA and unsaturated polyesters. Outstanding in polyurethane systems.
-
Silicone-based modified polysiloxane defoamer and deaerator for solvent-based systems. Recommended for clear coats. Best performing in polyurethane, epoxy, UV and UPE systems.
-
Silicone based modified polysiloxane defoamer and deaerator for solvent-based systems. Works as a post-add to break foam generated in processing.
-
Silicone based fluorocarbon modified polysiloxane defoamer and deaerator for solvent-based systems. Suitable for use in all printing ink systems ranging from offset, grauvre, flexo and UV systems.
-
Silicone based fluorocarbon modified polysiloxane defoamer and deaerator for solvent-based systems. Very broad application from low to high polar systems. Suitable for physical drying systems and air-drying alkyds.
-
Non-silicone polymer based defoamer for solvent-based systems. Suitable for high solid and high viscosity systems such as UPE, polyurethane, epoxy and PMMA flooring.
-
Non-silicone polymer based defoamer for solvent-based systems. Anti-foam and de-aeration agent for solvent containing and solvent-free systems of epoxy, polyurethane, coil coatings and wood coatings.
-
Silicone fluorocarbon modified polysiloxane defoamer and deaertor in solvent-based systems. Universal defoamer for all systems low to high polar. Uses include, air-drying alkyds, physical drying systems, wood coatings, vehicle refinish and general industrial coatings.
-
Non-silicone modified polyvinyl polymer. May cause some haziness in clear systems. Widely used in NC and AC lacquer wood finishes especially applied by curtain coater.
-
Non-silicone polymer based defoamer for solvent-based systems. Economy replacement for Afcona 2020.
-
Non-silicone polymer based defoamer for solvent-based systems. Very suitable for pigmented and matte UV coatings, epoxies, polyurethanes and baking paints.
-
Modified polysiloxane silicone-based defoamer and deaerator for solvent-based systems. Good compatibility and clarity in high gloss UV systems, epoxies, polyurethanes, baking paints and other high viscosity systems.
-
Modified polysiloxane silicone-based defoamer and deaerator for solvent-based systems. For unsaturated polyester systems. Better transparency and defoaming than 2720 along with very good surface leveling. Compatible in epoxy resin systems.
-
Silicone based modified polysiloxane defoamer and deaerator. Very good defoaming and compatibility balance. Works well with polyurethane, NC & AC wood coatings and air-drying long oil and medium oil alkyds.
-
Silicone-based modified polysiloxane defoamer and deaerator for solvent-based systems. Has additional leveling properties in comparison to 2035.
-
A non-silicone polymer defoamer for solvent-based systems. Very good compatibility and is extremely suitable for clear and high-gloss coating applications.
-
Modified polysiloxane silicone based defoamer and deaerator for solvent-based systems. Shows very good performance for Epoxy and PU systems, especially solvent-less applications.
-
Fluorocarbon modified polysiloxane silicone with strong surface tension reduction property. This translates to excellent anti-crater properties, substrate wetting and improved vertical leveling. Suitable in solvent and water-based systems.
-
Modified polyether polysiloxane silicone suitable for solvent-based coatings. High slip performance, enhances build-up appearance. Good for metal coatings, refinish and baking paints. Low inner bubble sensitivity in polyurethane coatings.
-
Modified polyether polysiloxane silicone based slip and leveling agent for solvent and water-based systems. Good anti-cratering in polyurethane.
-
Polymetric fluorocarbon polyacrylic non-silicone slip and leveling agent. Very strong surface tension reduction properties. Excellent anti-cratering, substrate wetting and promotion of vertical flow. Can be used in all solvent-based systems. Best in car-refinish, plastic coatings and industrial coatings.
-
A non-silicone pure polyacrylic polymer leveling agent. Provides anti-cratering, leveling and improved substrate wetting. Delivers similar performance to fluorocarbon modified products.
-
Modified polyacrylate polymeric dispersant based on CRP (Controlled Radical Polymerization) technology for solvent-based systems. High molecular weight working towards deflocculation of all types of pigments. Offers excellent performance in stabilizing both inorganic and organic pigments; very good stability performance in carbon black dispersions, where very high jetness can be achieved. In metallic systems, it gives a golden undertone for high channel black dispersions.
-
Based on ketoxime and phosphorous ester salt. Anti-gelling agent for air-drying alkyd and baking paints. In air-drying alkyds, the ketoxime forms a protective layer on the top of the paint to reduce oxidation.
-
Fatty acid modified polyester improved pigment stability over 6220. Color acceptance aid & dispersant for all kinds of pigments for water & solvent-based systems. Can be used to formulate resin free universal colorants. 96% active.
-
Alkylol ammonium salt of a HMW carboxylic acid wetting and dispersing agent for water and solvent-based systems. Very good anti-settling effect. Extremely suitable for wash primers.
-
Polymer with pigment affinity groups suitable for all solvent-based systems ranging from low to high polar, including air dry alkyd. Very good pigment stability, good viscosity and high color strength. Supplied as a 100% dispersant, making it an excellent dispersant for polyurethane, epoxy and UV coatings.
-
Cationic/anionic co-polymer with pigment affinity groups for wetting and dispersing in solvent-based systems. Improved version of 5207 with broader resin compatibility. Offers near-HMWD performance at a price point closer to conventional agents.
