-
Tytan TNBT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TNBT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TNBT is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TNBT can also be used as a moisture scavenger to prolong shelf life of moisture sensitive high viscosity products. Tytan TNBT can only be used as an additive to solvent based products.
-
Tetra 2-etehylhexyl titanate, a titanium alkoxide. Used as a esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan ZPN is aqueous solution of ammonia zirconium lactate and is used in paint manufacture to improve gel strength, anti-sagging, paint structuring and levelling. Tytan ZPN shall be added at the last stage after formulated paint with typical level between 0.3 ~ 1.5%. Tytan ZPN works well in the surfactant stabilized paint as well as colloid stabilized paint.
-
Pigment synergist for pthalocyanine, carbon black and violet pigments. To be used in combination with a HMW dispersant. Lowers viscosity of the mill base, improves gloss, jetness & pigment stability.
-
Special block-copolymer for wetting and dispersing in solvent & water-based primers and high filler loads. Good viscosity depresser and mattting.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Higher molecular weight compared to 4046. Improves dispersing performance, especially with carbon black pigments to provide higher jetness. First choice for high end applications such as OEM, refinish and industrial coatings.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Improved version of 4070 with no crystallizing problem and supplied in higher solids (45%). Recommended for refinish, can coatings, dispersion of transparent iron oxide and other industrial coatings and pigment concentrate preparations.
-
BTX-free modified polyurethane polymeric dispersant for solvent-based systems. Very effective in inorganic, organic pigments and carbon black dispersion preparation. Very-effective 3-dimensional steric hindrance design allows for good stability for all pigments. Very good viscosity reduction and improved color strength.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Supplied in 100% active form. Recommended for solvent-free systems where conventional wetting and dispersing agents cannot perform with organic pigments and carbon blacks. Extremely good compatibility with thermoplastic acrylic, NC and CAB. Great for ink dispersions also.
-
Fatty acid modified polyester emulsifier. It is recommended to improve color acceptance of colorants in base paints. The use in colored NC can improve the gloss. 96% active.
-
Fatty acid modified polyester. Improved hydrophilicity over 6225. Yields better color strength, viscosity reduction, pigment stability and better color acceptance in water and solvent-based paints.
-
Modified polyacrylate polymer based on CRP (Controlled Radical Polymerization) technology. Offers excellent performance in stabilizing both inorganic and organic pigments. Very good stability performance in carbon black dispersions, where very high jetness can be achieved. In metallic systems, it gives a golden undertone for high channel black dispersions.
-
HMW carboxylic acid salt wetting and dispersing agent for solvent-based systems. Higher polarity compared to 5044. Used in low to medium polar systems. Can cause yellowing in NC. Most recommended for bentonite gel preparations.
-
Fatty acid modified polyamide economical grade wetting and dispersing agent for solvent-based pigment dispersions. Designed to replace first-generation products such as 5044, 5054, 5207. Stabilizes pigments through electrical charge repulsion forces. Very effective in bentonite gel preparation. 100% active version of 5009.
-
Modified polyether polysiloxane silicone developed for high-slip applications where foam stabilization is undesirable. Good transparency, effective in all solvent-based coatings such as NC, AC, polyurethane and baking paints.
-
Modified polyether polysiloxane based polymer with di-hydroxyl functional groups terminated at both ends. Can be cross-linked in polyurethane systems as well as in baking paints. Very high slip and leveling.
-
More polar combination of high boiling point solvents than 3037. Promotes the flow and prevents solvent boiling problems that lead to pin holes.
-
Blends of high boiling point solvent with silicone for slip and leveling in solvent-based systems. Contains small amount of very compatible polysiloxane. Promotes the flow of the system while preventing solvent boiling problems that lead to pin holes.
-
Modified polyether polysiloxane silicone for solvent-based unsaturated polyester systems. (UPE) Improves leveling and promotes a smoother surface. Also suitable in UV coatings.
-
Modified polyether polysiloxane supplied at 100% active. Acts as a universal slip and leveeling agent for all solvent-based systems. Main properties include anti-crater, slip and anti-Bénard formation.
-
Modified polyether polysiloxane silicone supplied at 100% active. Strong slip with "wet feel". Recommended for UV, metal coatings and baking paints. Enhances build up appearance in refinish coatings.
-
Modified polyether polysiloxane silicone that is one of the highest slip performers of Afcona silicone based leveling agents. Low foam, good compatibility and no influence to in-can transparency. Suitable for all sb systems where high slip is required.
-
Modified polyether polysiloxane silicone based polymer with di-hydroxyl functional groups terminated at both ends. This allows it to cross-link in polyurethane systems as well as in baking paints. Very high slip and leveling, 100% version of 3085.
-
A non-silicone pure polyester polymer leveling agent based on high molecular weight. Very good compatibility and leveling performance. Suitable for coil coatings, can coatings, polyurethanes, epoxies and other solvent-based coatings.
-
Short-chain modified polysiloxane silicone. Recoatable, will not influence intercoat adhesion. Recommended for baking paints based on alkyd-melamine, oil-free polyesters and thermosetting acrylics. Improves hot water soaking resistance.
-
Modified polyether polysiloxane silicone with improved leveling and anti-crater performance in polyurethane and UV coatings from 3250.
-
Modified polyalkyl polysiloxane silicone with better defoaming properties than 3236 but less than 3238 in medium to high polar systems. Suitable for soam sensitive systems, such as solventless polyurethane & epoxies. Improves matting in UV.
-
Modified polyalkyl polysiloxane silicone with better defoaming than 3236 and 3239 in medium to high polar systems. Moderate slip and leveling. Some in-can haze can occur. Suitable for foam sensitive systems such as solvent-less polyurethane & epoxies, also wood coatings.
-
Modified polyalkyl polysiloxane silicone with slip, leveling and defoaming properties. Suitable for foam sensitive systems such as, solventless polyurethane, epoxy and coil coatings. Small degree of in-can haziness to clear coats. High temperature resistance to 280°C.
-
Modified polyurethane polymer dispersant for solvent-based systems. Perfect for inorganic pigments, especially Ti02 and matting agents. Widely used as dispersant for inorganic pigment for pigment concentrate preparation.
-
Modified polyurethane polymer dispersant for solvent based systems. Mainly used in preparation of pigment concentrates due to good compatibility and price advantage. Can be utilized as a dispersant in normal grinding, especially for inorganic pigments.
-
Modified polyurethane polymeric dispersant for medium to low-polar, solvent-based systems. Suitable for can or coil coatings and polyester resin systems.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Lower-cost alternative to 4046. Very good dispersing for broad range of pigments. Recommended for polyurethane, baking paint and epoxy.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Universal and efficient for all pigments, including organic and carbon black. Improves dry film gloss and prevents floating/flooding.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Developed for co-grinding purposes for coil and can coatings, baking polyesters or acrylics, epoxies and polyurethane systems. Best co-grinding agent Afcona has to offer.
