-
Modified polyurethane polymeric dispersant for solvent-based systems. Lower-cost alternative to 4046. Very good dispersing for broad range of pigments. Recommended for polyurethane, baking paint and epoxy.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Higher molecular weight compared to 4046. Improves dispersing performance, especially with carbon black pigments to provide higher jetness. First choice for high end applications such as OEM, refinish and industrial coatings.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Universal and efficient for all pigments, including organic and carbon black. Improves dry film gloss and prevents floating/flooding.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Developed for co-grinding purposes for coil and can coatings, baking polyesters or acrylics, epoxies and polyurethane systems. Best co-grinding agent Afcona has to offer.
-
Modified polyurethane polymer dispersant for solvent-based systems. Perfect for inorganic pigments, especially Ti02 and matting agents. Widely used as dispersant for inorganic pigment for pigment concentrate preparation.
-
Modified polyurethane polymer dispersant for solvent based systems. Mainly used in preparation of pigment concentrates due to good compatibility and price advantage. Can be utilized as a dispersant in normal grinding, especially for inorganic pigments.
-
A non-silicone pure polyacrylic polymer leveling agent. Provides anti-cratering, leveling and improved substrate wetting. Delivers similar performance to fluorocarbon modified products.
-
A non-silicone pure polyester polymer leveling agent based on high molecular weight. Very good compatibility and leveling performance. Suitable for coil coatings, can coatings, polyurethanes, epoxies and other solvent-based coatings.
-
Polymetric fluorocarbon polyacrylic non-silicone slip and leveling agent. Very strong surface tension reduction properties. Excellent anti-cratering, substrate wetting and promotion of vertical flow. Can be used in all solvent-based systems. Best in car-refinish, plastic coatings and industrial coatings.
-
Modified polyether polysiloxane silicone based polymer with di-hydroxyl functional groups terminated at both ends. This allows it to cross-link in polyurethane systems as well as in baking paints. Very high slip and leveling, 100% version of 3085.
-
Short-chain modified polysiloxane silicone. Recoatable, will not influence intercoat adhesion. Recommended for baking paints based on alkyd-melamine, oil-free polyesters and thermosetting acrylics. Improves hot water soaking resistance.
-
Modified polyether polysiloxane silicone with improved leveling and anti-crater performance in polyurethane and UV coatings from 3250.
-
Modified polyether polysiloxane silicone developed for high-slip applications where foam stabilization is undesirable. Good transparency, effective in all solvent-based coatings such as NC, AC, polyurethane and baking paints.
-
Modified polyalkyl polysiloxane silicone with better defoaming properties than 3236 but less than 3238 in medium to high polar systems. Suitable for soam sensitive systems, such as solventless polyurethane & epoxies. Improves matting in UV.
-
Modified polyalkyl polysiloxane silicone with better defoaming than 3236 and 3239 in medium to high polar systems. Moderate slip and leveling. Some in-can haze can occur. Suitable for foam sensitive systems such as solvent-less polyurethane & epoxies, also wood coatings.
-
Modified polyalkyl polysiloxane silicone with slip, leveling and defoaming properties. Suitable for foam sensitive systems such as, solventless polyurethane, epoxy and coil coatings. Small degree of in-can haziness to clear coats. High temperature resistance to 280°C.
-
Modified polyether polysiloxane supplied at 100% active. Acts as a universal slip and leveeling agent for all solvent-based systems. Main properties include anti-crater, slip and anti-Bénard formation.
-
Modified polyether polysiloxane silicone supplied at 100% active. Strong slip with "wet feel". Recommended for UV, metal coatings and baking paints. Enhances build up appearance in refinish coatings.
-
Modified polyether polysiloxane silicone that is one of the highest slip performers of Afcona silicone based leveling agents. Low foam, good compatibility and no influence to in-can transparency. Suitable for all sb systems where high slip is required.
-
Modified polyether polysiloxane based polymer with di-hydroxyl functional groups terminated at both ends. Can be cross-linked in polyurethane systems as well as in baking paints. Very high slip and leveling.
-
More polar combination of high boiling point solvents than 3037. Promotes the flow and prevents solvent boiling problems that lead to pin holes.
-
Blends of high boiling point solvent with silicone for slip and leveling in solvent-based systems. Contains small amount of very compatible polysiloxane. Promotes the flow of the system while preventing solvent boiling problems that lead to pin holes.
-
Modified polyether polysiloxane silicone for solvent-based unsaturated polyester systems. (UPE) Improves leveling and promotes a smoother surface. Also suitable in UV coatings.
-
Fluorocarbon modified polysiloxane silicone with strong surface tension reduction property. This translates to excellent anti-crater properties, substrate wetting and improved vertical leveling. Suitable in solvent and water-based systems.
-
Modified polyether polysiloxane silicone suitable for solvent-based coatings. High slip performance, enhances build-up appearance. Good for metal coatings, refinish and baking paints. Low inner bubble sensitivity in polyurethane coatings.
-
Modified polyether polysiloxane silicone based slip and leveling agent for solvent and water-based systems. Good anti-cratering in polyurethane.
-
Modified polysiloxane silicone-based defoamer and deaerator for solvent-based systems. Good compatibility and clarity in high gloss UV systems, epoxies, polyurethanes, baking paints and other high viscosity systems.
-
Non-silicone polymer based defoamer for solvent-based systems. Anti-foam and de-aeration agent for solvent containing and solvent-free systems of epoxy, polyurethane, coil coatings and wood coatings.
-
Modified polysiloxane silicone based defoamer and deaerator for solvent-based systems. Shows very good performance for Epoxy and PU systems, especially solvent-less applications.
-
Non-silicone polymer based defoamer for solvent-based systems. Suitable for high solid and high viscosity systems such as UPE, polyurethane, epoxy and PMMA flooring.
-
Modified polysiloxane silicone-based defoamer and deaerator for solvent-based systems. For unsaturated polyester systems. Better transparency and defoaming than 2720 along with very good surface leveling. Compatible in epoxy resin systems.
-
Modified polysiloxane silicone based defoamer and deaerator for solvent-based systems. Suitable for high solid & high viscosity systems. (polyurethane and epoxy flooring)
-
Modified polysiloxane silicone-based defoamer and deaerator for UV coatings. The defoamer is to be dissolved in a reactive solvent (HEA).
-
Non-silicone defoamer for water-based systems. Best used in pigment paste preparation with excellent high-shear resistance.
-
Non-silicone polymer defoamer for solvent-based and solvent-free systems of epoxy, polyurethane, UPE and UV coatings.
