-
Tytan TNBT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TNBT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TNBT is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TNBT can also be used as a moisture scavenger to prolong shelf life of moisture sensitive high viscosity products. Tytan TNBT can only be used as an additive to solvent based products.
-
Tytan AP110 is modified from Tytan AP100, which is aiming for better compatibility with various ink formulations. Tytan AP110 is proved offering the same adhesion performance as Tytan AP100, in addition, preventing the viscosity changed during printing process.
-
Tytan TET is titanium chelate of triethanolamine and isopropyl alcohol complexes with chemical formula as (TEA)2 – Ti – (OiPr) 2. Tytan TET is water soluble titanate and can be used in a variety of applications e.g. as cross-linking agent in aqueous and non-aqueous paint, wire enamel and adhesion promoter in polyurethane system.
-
Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. Tytan TNBZ is mainly used as catalyst for esterification, trans-esterification and olefin polymerization (Ziegler-Natta). Tytan TNBZ is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings.
-
Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. Tytan TNBZ is mainly used as catalyst for esterification, trans-esterification and olefin polymerization (Ziegler-Natta). Tytan TNBZ is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings.
-
Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-improvement properties which makes it also very suitable to strongly improve performance properties of industrial coatings on difficult modern polymeric substrates, glass and some metals. Tytan TAA can only be used in solvent based inks and coatings.
-
Tytan AP100 is a Titanium Phosphate Complex of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan AP100 is mainly designed to strongly increase adhesion of solvent based inks to a variety of plastics used for food packaging or other purposes. Tytan AP100 is transparent and therefore most suitable for modification of ink for very clear-colour and high-gloss printing. Tytan AP100 is low odour and applies to the most stringent contemporary legislation on registration of the ECB. Tytan AP100 can only be used in solvent based inks.
-
Tytan TIPT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TIPT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TIPT can also be used selectively as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TIPT is most suitable for use in the glass and glass fibre manufacturing. Tytan TIPT can only be used as an additive to solvent based products.
-
PANGEL OM4 is a rheological additive based upon a highly purified bentonite clay designed for low polarity systems. PANGEL OM4 is recommended for both aliphatic solvents and mineral or synthetic oils. Pangel OM4 requires the use of polar activators.
Properties PANGEL OM4 is an organobentonite recommended for providing the following properties in oil based systems:
- Decrease of sedimentation
- High thickening capacity
- Does not require polar activator
- High capacity for thikening inverted emulsions
- Control of sagging and dripping while improves stability.
Fields of application
Use of PANGEL OM4 as a rheological additive is recommended in the following applications:- Oil based concentrated formulations
- Formulations based in inverted emulsions
-
PANGEL OM8 is a rheological additive for low to medium polarity systems based upon highly purified bentonite clay. PANGEL OM8 is particularly recommended for systems based on resins such as polyurethanes, acrylics, polyesters, epoxy esters and alkyds.
Properties
PANGEL OM8 is an organobentonite recommended for providing the following properties in intermediate polarity systems:- Thixotropic and pseudoplastic effects.
- Sag control.
- Excellent levelling.
- Prevents pigment from long-term storage settling.
Fields of application
Use of PANGEL OM8 as a rheological additive is recommended in the following applications:- Anti-corrosive paints.
- Polyester coatings.
- Primers.
- Industrial finishes.
- Road marking paints.
- Bituminous undercoats.
- Varnishes.
- Inks.
-
PANGEL OMD1 is self-dispersing rheological additive for medium to low polarity systems, based upon a highly purified bentonite clay. PANGEL OMD1 is recommended for both aliphatic solvents and mineral or synthetic oils.
Properties
PANGEL OMD1 is an easy-to-disperse self-activated organobentonite, that is recommended for providing the following properties in solvent-borne systems:- Thixotropic and pseudoplastic effects.
- Sag control.
- Excellent levelling.
- Prevents pigment from long-term storage settling.
- No need of pregelling or the use of polar activators.
Fields of application
Use of PANGEL OMD1 as a rheological additive is recommended in the following applications:- Anti-corrosive paints.
- Polyester coatings.
- Primers.
- Industrial finishes.
- Road marking paints.
- Varnished.
- Lubricating greases.
- Bituminous undercoats.
