-
Fatty acid modified polyester emulsifier. It is recommended to improve color acceptance of colorants in base paints. The use in colored NC can improve the gloss. 96% active.
-
Fatty acid modified polyester. Improved hydrophilicity over 6225. Yields better color strength, viscosity reduction, pigment stability and better color acceptance in water and solvent-based paints.
-
Modified polyacrylate polymer based on CRP (Controlled Radical Polymerization) technology. Offers excellent performance in stabilizing both inorganic and organic pigments. Very good stability performance in carbon black dispersions, where very high jetness can be achieved. In metallic systems, it gives a golden undertone for high channel black dispersions.
-
HMW carboxylic acid salt wetting and dispersing agent for solvent-based systems. Higher polarity compared to 5044. Used in low to medium polar systems. Can cause yellowing in NC. Most recommended for bentonite gel preparations.
-
Fatty acid modified polyamide economical grade wetting and dispersing agent for solvent-based pigment dispersions. Designed to replace first-generation products such as 5044, 5054, 5207. Stabilizes pigments through electrical charge repulsion forces. Very effective in bentonite gel preparation. 100% active version of 5009.
-
Modified polyacrylic polymeric dispersant for water-based systems in all kinds of pigments within industrial coatings. Can be used to formulate resin-free pigment concentrates.
-
Modified polyether polysiloxane silicone developed for high-slip applications where foam stabilization is undesirable. Good transparency, effective in all solvent-based coatings such as NC, AC, polyurethane and baking paints.
-
Modified polyether polysiloxane silicone for solvent-based unsaturated polyester systems. (UPE) Improves leveling and promotes a smoother surface. Also suitable in UV coatings.
-
Modified polyether polysiloxane supplied at 100% active. Acts as a universal slip and leveeling agent for all solvent-based systems. Main properties include anti-crater, slip and anti-Bénard formation.
-
Modified polyether polysiloxane silicone supplied at 100% active. Strong slip with "wet feel". Recommended for UV, metal coatings and baking paints. Enhances build up appearance in refinish coatings.
-
Modified polyether polysiloxane silicone that is one of the highest slip performers of Afcona silicone based leveling agents. Low foam, good compatibility and no influence to in-can transparency. Suitable for all sb systems where high slip is required.
-
Modified polyether polysiloxane based polymer with di-hydroxyl functional groups terminated at both ends. Can be cross-linked in polyurethane systems as well as in baking paints. Very high slip and leveling.
-
More polar combination of high boiling point solvents than 3037. Promotes the flow and prevents solvent boiling problems that lead to pin holes.
-
Blends of high boiling point solvent with silicone for slip and leveling in solvent-based systems. Contains small amount of very compatible polysiloxane. Promotes the flow of the system while preventing solvent boiling problems that lead to pin holes.
-
Modified polyether polysiloxane silicone based polymer with di-hydroxyl functional groups terminated at both ends. This allows it to cross-link in polyurethane systems as well as in baking paints. Very high slip and leveling, 100% version of 3085.
-
A non-silicone pure polyester polymer leveling agent based on high molecular weight. Very good compatibility and leveling performance. Suitable for coil coatings, can coatings, polyurethanes, epoxies and other solvent-based coatings.
-
Short-chain modified polysiloxane silicone. Recoatable, will not influence intercoat adhesion. Recommended for baking paints based on alkyd-melamine, oil-free polyesters and thermosetting acrylics. Improves hot water soaking resistance.
-
Modified polyether polysiloxane silicone with improved leveling and anti-crater performance in polyurethane and UV coatings from 3250.
-
Modified polyalkyl polysiloxane silicone with better defoaming properties than 3236 but less than 3238 in medium to high polar systems. Suitable for soam sensitive systems, such as solventless polyurethane & epoxies. Improves matting in UV.
-
Modified polyalkyl polysiloxane silicone with better defoaming than 3236 and 3239 in medium to high polar systems. Moderate slip and leveling. Some in-can haze can occur. Suitable for foam sensitive systems such as solvent-less polyurethane & epoxies, also wood coatings.
-
Modified polyalkyl polysiloxane silicone with slip, leveling and defoaming properties. Suitable for foam sensitive systems such as, solventless polyurethane, epoxy and coil coatings. Small degree of in-can haziness to clear coats. High temperature resistance to 280°C.
-
Organically modified polysiloxane for aqueous systems. Short chain polysiloxane with no influence on intercoat adhesion in multi-coat systems. Very strong anti-cratering. Must be used in combination with a suitable defoamer. Recommended for electro deposition coatings and all other water-based systems.
-
Modified polysiloxane emulsion slip and leveling agent for water-based systems. (APE free) Good water resistance and slip performance. No foam stabilizing effect. High dosages provide water repellent effect.
-
Reactive polyether-modified polysiloxane with methacrylate functional groups for use in UV/EB systems. Provides permanent slip.
