C.L. Hauthaway

An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. L-3466was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. CHARACTERISTICS:

• May be formulated into low surface tension coatings
• Exceptional dye transfer resistance
• Excellent abrasion resistance
• Higher silicone content (~2X) than HD-2602
• Crosslinkable for improved adhesion and performance
• Contains n-ethyl pyrrolidone (NEP) co-solvent

A self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use inhigh performance concrete and wood floor coatings. L-3155employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. CHARACTERISTICS:

• One-component, self-crosslinkingpolymer
• High level oftoughness, abrasion-and mar-resistance
• Outstanding water and chemical resistance
• Excellent exterior weathering performance
• Contains n-methyl pyrrolidone(NMP) co-solvent

A very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. L-2882 was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. CHARACTERISTICS:

• Superior adhesion to PVC
• Excellent UV resistance
• Exceptional alcohol resistance
• Humidity resistance
• Contains dipropylene glycol dimethyl ether cosolvent

An aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. HD-2139was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. CHARACTERISTICS:

• High gloss
• Excellent mar and wear resistance
• Excellent resistance to staining
• Remarkably high balance of physical properties
• Contains n-methyl pyrrolidone (NMP) co-solvent

An aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. HD-2107was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:

• Extreme toughness, abrasion and mar resistance
• Outstanding water and chemical resistance
• Excellent exterior weathering performance
• Can be crosslinked to enhance performance
• Dilution and clean-up with ordinary tap water
• Contains n-methyl pyrrolidone (NMP) co-solvent

An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. HD-2602 was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. CHARACTERISTICS:

• May be formulated into low surface tension coatings
• Excellent abrasion resistance
• Non-fugitive silicone component
• Crosslinkable for improved adhesion and performance
• Contains n-methyl pyrrolidone co-solvent

Soft, aliphatic, water-borne polyurethane dispersion in a blend of DMM and propylene glycol solvents. L-2985 was designed for use in textile applications that require a soft hand coupled with very good strength, abrasion resistance, excellent adhesion, and excellent resiliency. Due to its overall properties, L-2985 can be used as a finish or a coating. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. L-2985is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows L-2985to be used as a heat seal coating. When properly formulated, L-2985can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics. CHARACTERISTICS:

• NMP-free, APEO-free
• Superior flexibility
• Soft, tough, flexible film
• Good abrasion resistance
• Superior low temperature, flex-crack resistance
• Low melting point (265ºF)