-
Modified polyurethane polymeric dispersant for solvent-based systems. Supplied in 100% active form. Recommended for solvent-free systems where conventional wetting and dispersing agents cannot perform with organic pigments and carbon blacks. Extremely good compatibility with thermoplastic acrylic, NC and CAB. Great for ink dispersions also.
-
Organically modified polysiloxane slip and leveling agent for aqueous systems. Very strong surface tension reduction and good compatibility properties. Very fast substrate wetting and anti-crater performance in all water based systems.
-
Organically modified polysiloxane slip and leveling for water-based systems. 50% solution of 3580 in DMP.
-
Polyether polymer modification with acidic groups for dispersing in solvent-based paints. Specially developed for PVC, UPE and PU foam systems where it can help to disperse filler and inorganic pigment in the system with good viscosity reduction & extender dispersions.
-
High molecular weight dispersant with solid surface affinity groups. Gives excellent wetting to the fiberglass leading to faster wetting of resin to the fiber glass & eventually gives better bonding strength & performance in the final product.
-
Special block-copolymer for wetting and dispersing in solvent & water-based primers and high filler loads. Good viscosity depresser and mattting.
-
Pigment synergist for pthalocyanine, carbon black and violet pigments. To be used in combination with a HMW dispersant. Lowers viscosity of the mill base, improves gloss, jetness & pigment stability.
-
Replacement for PU catalysts, especially for tin-based catalysts like DBTL. One- and two- component polyurethane systems, e.g. for automotive refinish coatings, general industrial coatings, coil coatings formulated with blocked isocyanates. Condensation reaction in RTV silicone resins and accelerate the cross-linking process. Catalyst for PU foams.
-
Tytan coupling agents can enhance the dispersion of inorganic fillers in polymer systems such as PP, PE, by modifying the surface of filler particles. The content of fillers can therefore be increased, saving the cost of polymer, while maintaining the mechanical property.
-
Tytan ZPN is aqueous solution of ammonia zirconium lactate and is used in paint manufacture to improve gel strength, anti-sagging, paint structuring and levelling. Tytan ZPN shall be added at the last stage after formulated paint with typical level between 0.3 ~ 1.5%. Tytan ZPN works well in the surfactant stabilized paint as well as colloid stabilized paint.
-
Tytan CX400 is titanium chelate of alkanolamine titanate complex and developed as a rheology modifier for use in emulsion paints. Tytan CX400 reacts with colloid stabilized binders to impart thixotropic structure. Tytan CX400 is suitable for VOC free paint.
-
Tytan CX200 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX200 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX200 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Tytan CX200 has improved compatibility with a broad range of paint formulations but it is still recommended that use of Tytan CX200 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
Tytan CX100 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX100 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX100 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Use of Tytan CX100 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
TYTAN Titanate Coupling & Dispersing Agents are molecular bridges at the interface between inorganic fillers (such as CaCO3, BaSO4, graphite, talc, carbon black, silica and metal oxides) and polymers (such as PP, PE, PVC, PBT, PET, ABS and rubbers). When incorporated into polymers, the coupling agent could improve filler loading, pigment dispersion, processability and composite mechanical properties to achieve the specification desired. As a comparison, silane coupling agents only reacts with hydroxyl groups on the filler surface via water condensation of silanol-siloxane process, therefore it is suitable for glass, alumina hydroxide, magnesium hydroxide etc. The advantage of titanate coupling agents is that they not only react with hydroxyls, but also the free protons on the inorganic interface, which results in the formation of organic monomolecular layers on the inorganic surface forming the bonding for polymers. Dosage is up to the property required and the filler type used is dependent on its surface area, the larger the surface area, the more Tytan titanate coupling & dispersing agent are needed. As a guide, the general dosage range is 0.2% ~ 2.0% by weight of filler.
-
Tytan S2 is a titanium ethylacetoacetates used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. Tytan S2 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.
-
Tytan AQZ30 is a Zirconium triethanolamine complex that readily hydrolyses in water to produce a hydroxyl zirconium chelate. This will readily crosslink with –OH and –COOH groups in solvent and aqueous systems to form strong gels and has the potential to act as an adhesion promoter. AQZ30 is an effective rheology modifier for functionalised guar derivatives for secondary and tertiary recovery of oil and gas wells. It has the ability to crosslink in both water-borne and solvent-borne coatings and provides adhesion in water-borne and solvent-borne printing inks. Compared with titanium based alkanolamines, AQZ30 offers prevention against yellowing of the polymer in use.
-
Tetra 2-etehylhexyl titanate, a titanium alkoxide. Used as a esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan PBT has polymer structure with chemical formula as TixO y(OR) 4x-y. Tytan PBT is largely used in formulating heat and corrosion resistant paints. Tytan PBT can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint contains Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dried, it can stand up to 600 oC.
-
Tytan AP110 is modified from Tytan AP100, which is aiming for better compatibility with various ink formulations. Tytan AP110 is proved offering the same adhesion performance as Tytan AP100, in addition, preventing the viscosity changed during printing process.
-
Tytan S6 is a titanium ethylacetoacetates used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. Tytan S6 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.
-
Tytan TET is titanium chelate of triethanolamine and isopropyl alcohol complexes with chemical formula as (TEA)2 – Ti – (OiPr) 2. Tytan TET is water soluble titanate and can be used in a variety of applications e.g. as cross-linking agent in aqueous and non-aqueous paint, wire enamel and adhesion promoter in polyurethane system.
-
Tytan TNBT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TNBT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TNBT is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TNBT can also be used as a moisture scavenger to prolong shelf life of moisture sensitive high viscosity products. Tytan TNBT can only be used as an additive to solvent based products.
-
Tetraethyl titanate or ET is a titanium alkoxide. Tytan ET is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
