-
Solution of acidic polyester phosphorous dispersing and wetting agent specifically designed for pure white paints in solvent-based systems. Very good viscosity reduction. Suitable for most solvent-based systems. Not suitable for air-drying ink systems.
-
Amine rich polymer of carboxylic acid and polyamide dispersing agent for carbon blacks and organic pigments. Specifically for artificial leather, polyurethane, alkyd, polyamide and printing ink systems.
-
Unsaturated polyamide and acid ester salt universal dispersant for solvent-based systems. Can be used to prepare bentonite gels.
-
HMW carboxylic acid salt wetting and dispersing agent for solvent-based systems. Higher polarity compared to 5044. Used in low to medium polar systems. Can cause yellowing in NC. Most recommended for bentonite gel preparations.
-
HMW unsaturated carboxylic acid with polysiloxane wetting and dispersing agent for solvent-based systems. An effective co-grinding agent, containing polysiloxane. Can be used as a post-add to correct floating and flooding problems. Can give foam stabilizing effect due to the silicone modification.
-
HMW unsaturated carboxylic acid wetting and dispersing agent for solvent-based systems. Silicone-free version of 5065, no foam stabilizing effect. Stronger anti-settling properties.
-
Alkylol ammonium salt of a HMW carboxylic acid wetting and dispersing agent for water and solvent-based systems. Very good anti-settling effect. Extremely suitable for wash primers.
-
OH-functional unsaturated modified carboxylic acid for wetting and dispersing in solvent-based systems. Designed for stabilization of all kinds of pigments in air-drying alkyds.
-
Fatty acid modified polyamide economical grade wetting and dispersing agent for solvent-based pigment dispersions. Designed to replace first-generation products such as 5044, 5054, 5207. Stabilizes pigments through electrical charge repulsion forces. Very effective in bentonite gel preparation. 100% active version of 5009.
-
Acidic polyester phosphorous wetting and dispersing agent for both water and solvent-based systems. 100% active version of 5010.
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Unsaturated polyamide and acid ester salt for wetting and dispersing in solvent-based systems.
