-
Out of stockA potassium salt of an organic phosphate ester used as a hydrotrope for acid and alkaline systems where low foam is desirable. Soluble in water, alcohols and glycols. It is insoluble in oils and solvents.
-
Out of stockTytan AP20 is primarily designed to strongly increase adhesion of solvent based inks to a variety of plastics used for food packaging or other purposes, but also pigment distribution and heat sealing resistance are improved allowing perfect hiding power and appearance of printing on otherwise problematic substrates. Tytan AP20 however is more user-friendly as the addition of the ethanol strongly reduces the pour point and as such the possibility for crystallization at low to normal temperatures. Tytan AP20 can only be used in solvent based inks and coatings.
-
Polysiloxane modified polymer defoamer and deaerator for water-based systems with broad compatibility. Does not introduce haze. Best added as post-add, or in low shear conditions.
-
Silicone modified polysiloxane defoamer and deaerator for solvent-based systems. Uses included polyurethane, baking paints and curtain coating applications.
-
Non-silicone defoamer for water-based systems. Best used in pigment paste preparation with excellent high-shear resistance.
-
Modified polysiloxane with fine silica for water-based systems. Very high resistance to shear forces and temperature.
-
Non-silicone polymer defoamer for solvent-based and solvent-free systems of epoxy, polyurethane, UPE and UV coatings.
-
Modified polysiloxane silicone based defoamer and deaerator for solvent-based systems. Suitable for high solid & high viscosity systems. (polyurethane and epoxy flooring)
-
Modified polysiloxane silicone-based defoamer and deaerator for UV coatings. The defoamer is to be dissolved in a reactive solvent (HEA).
-
Silicone-based modified polysiloxane defoamer and deaerator for solvent-based systems. Best suitable for medium to high polar systems such as epoxy, TPA and unsaturated polyesters. Outstanding in polyurethane systems.
-
Silicone-based modified polysiloxane defoamer and deaerator for solvent-based systems. Recommended for clear coats. Best performing in polyurethane, epoxy, UV and UPE systems.
-
Silicone based modified polysiloxane defoamer and deaerator for solvent-based systems. Works as a post-add to break foam generated in processing.
-
Silicone based fluorocarbon modified polysiloxane defoamer and deaerator for solvent-based systems. Suitable for use in all printing ink systems ranging from offset, grauvre, flexo and UV systems.
-
Silicone based fluorocarbon modified polysiloxane defoamer and deaerator for solvent-based systems. Very broad application from low to high polar systems. Suitable for physical drying systems and air-drying alkyds.
-
Non-silicone polymer based defoamer for solvent-based systems. Suitable for high solid and high viscosity systems such as UPE, polyurethane, epoxy and PMMA flooring.
-
Non-silicone polymer based defoamer for solvent-based systems. Anti-foam and de-aeration agent for solvent containing and solvent-free systems of epoxy, polyurethane, coil coatings and wood coatings.
-
Silicone fluorocarbon modified polysiloxane defoamer and deaertor in solvent-based systems. Universal defoamer for all systems low to high polar. Uses include, air-drying alkyds, physical drying systems, wood coatings, vehicle refinish and general industrial coatings.
-
Non-silicone modified polyvinyl polymer. May cause some haziness in clear systems. Widely used in NC and AC lacquer wood finishes especially applied by curtain coater.
-
Non-silicone polymer based defoamer for solvent-based systems. Economy replacement for Afcona 2020.
-
Non-silicone polymer based defoamer for solvent-based systems. Very suitable for pigmented and matte UV coatings, epoxies, polyurethanes and baking paints.
-
Modified polysiloxane silicone-based defoamer and deaerator for solvent-based systems. Good compatibility and clarity in high gloss UV systems, epoxies, polyurethanes, baking paints and other high viscosity systems.
