- High solids (48%), co-solvent free
- Can be crosslinked to improve bond strength and heat-resistance.
- Non-crystalline nature
-
A high solids, anionic, aliphatic, aqueous polyurethane dispersion from Hauthaway. L-2255is an adhesive grade polyurethane suggested for industrial laminating applications. Suitable for bonding plasticized vinyl sheet to itself and to other substrates such as rubber, wood, cardboard and textiles. CHARACTERISTICS:
-
An anionic, aliphatic, aqueous polyurethane dispersion from Hauthaway. L-2183 is an adhesive grade polyurethane suggested for modifying industrial laminating adhesives. L-2183 may also be used in low tack pressure sensitive applications. CHARACTERISTICS
- Low activation temperature (200 F)
- Can be crosslinked to improve bond strength and heat-resistance.
- Non-crystalline nature
- Contains n-methyl pyrrolidone co-solvent.
-
An aliphatic, co-solvent free, polyether-based, aqueous polyurethane dispersion from Hauthaway. L-2641 was designed for leather basecoat applications where plate-release and print retention are important. CHARACTERISTICS
- Contains no co-solvent
- Produces soft, tough films
- Good water and solvent-resistance for a soft polymer Dries to clear, glossy film
- Dilution and cleanup with water
-
A hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675 from Hauthaway. L-3225 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS
- Self-coalescing at temperatures above 60° F
- Contains no co-solvent
- Produces clear, durable films with low levels of co-solvent (<100 g/l) Excellent non-yellowing properties
- Good water and chemical resistance
-
An NMP-free/APEO-free aliphatic, polyester-based, polyurethane dispersion designed to produce unequaled clarity and gloss from Hauthaway. L-3040 was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. CHARACTERISTICS
- Wet look gloss
- Glass-like clarity
- Adhesion to a wide variety of substrates including wood, plastics, textiles, leather
- Dilution and clean up with ordinary tap water
- Contains dipropylene glycol dimethyl ether co-solvent
-
An aliphatic, APEO-free, co-solvent free, polyether-based, polyurethane dispersion from Hauthaway. L-3037 was designed for base coats or intermediate coats intended for plating/embossing. Films based on this polymer exhibit excellent print retention properties. CHARACTERISTICS
- Excellent print retention properties
- Contains no co-solvent
- Produces soft, tough films
- Good water and solvent-resistance for a soft polymer Dries to clear, glossy film
-
A soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion from Hauthaway. L-3121 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS
- Maximum hydrolytic stability and oxidation resistance Outstanding toughness and abrasion resistance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
-
A soft, co-solvent free, aliphatic, polycarbonate-based polyurethane dispersion from Hauthaway. L-3529 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. It may be blended with L-3528 to increase hardness. CHARACTERISTICS
- Maximum hydrolytic stability and oxidation resistance
- Outstanding toughness and abrasion-resistance
- Good water and chemical resistance
- Can be crosslinked to enhance performance
- Co-solvent free, tin-free, APEO-free.
-
A very soft, co-solvent free, aliphatic, polyester polyurethane dispersion from Hauthaway. L-3614 was designed for use in applications that require an ultra-soft hand coupled with good strength, abrasion resistance, and excellent resiliency. It may be used as a blending resin with the harder L-3615 to impart increased toughness. A balanced composition provides good stability with acrylics and confers superior strength, abrasion resistance and low temperature flexibility properties. CHARACTERISTICS
- Co-solvent free, TEA free, Tin free, APEO free
- Ultra soft, tough, dry film
- Very good abrasion and UV resistance
- Exceptional low temperature flexibility and crack resistance
-
A hard, co-solvent free, aliphatic, polyester polyurethane dispersion from Hauthaway. L-3615 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. It may also be used as a blending resin with the softer L-3614 to impart greater film flexibility. A balanced composition provides good stability with acrylics and confers superior strength, abrasion resistance and low temperature flexibility properties. CHARACTERISTICS
- Co-solvent free, TEA free, Tin free, APEO free
- Medium hard, tough, dry film
- Excellent water and chemical resistance
- Superior abrasion resistance
- Good adhesion to a wide variety of substrates
-
Medium hard, non-ionic, aliphatic, polyester-based polyurethane dispersion from Hauthaway. L-3632 was designed for use in fiberglass sizing applications that require very good strength, abrasion-resistance and adhesion. CHARACTERISTICS
- TEA-free, pyrrolidone-free, APEO-free
- Forms medium hard, tough, flexible films
- Good abrasion resistance
- Superior, low temperature flex-crack resistance
- Contains dipropylene glycol monomethyl ether
-
An aliphatic, polyurethane topcoat which produces a soft, rubbery feel at low gloss levels. Suggested Uses: Hauthane HD-3810 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
- Soft, rubbery/grabby feel
- Inherently low gloss without the use of external flatteners Silicone-free
- Can be crosslinked to enhance performance
- Forms a film at room temperature
- Low VOC: <50 g/l less water
-
A formulated, aliphatic, polyurethane topcoat which produces a soft, silky feel at low gloss levels. Suggested Uses: Hauthane HD-3820 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
- Soft, silky feel
- Low gloss
- Can be crosslinked to enhance performance
- Forms a film at room temperature
- Low VOC: <50 g/l less water
-
A formulated, aliphatic, polyurethane topcoat which produces a soft, slick feel at low gloss levels. Suggested Uses: Hauthane HD-3830 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
- Soft, slick feel
- Low gloss
- Can be crosslinked to enhance performance
- Forms a film at room temperature
- Low VOC: <50 g/l less water
-
A soft, matte finish, aliphatic, polyurethane dispersion HD-4626 can be used as a companion dulling agent for basecoat and topcoat formulas on full-grain, corrected, and split leathers. HD-4626 is particularly useful where the break of the leather is a concern. Characteristics:
- Produces a soft, tough, dull film
- Crosslink-able for improved chemical resistance
- Outstanding flexibility
- Good spraying characteristics
- Low tack for good pile down and plate-ability
-
Soft, aliphatic, water-borne, polyurethane dispersion. HD-4638 was designed for use in textile applications as a versatile polyurethane coating. Due to its overall properties, HD-4638 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. HD-4638 is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance Characteristics:
- Superior flexibility
- Soft, tough, flexible, dry film
- Excellent UV resistance
- Very good abrasion resistance
- Superior low temperature flexibility and crack resistance
- High melting point (320°F)
- Good strength properties
-
Ultra-soft, aliphatic, water-borne urethane dispersion. HD-4670 was designed for use in textile applications that require an ultra-soft hand coupled with good strength, abrasion resistance, and excellent resiliency. Due to its overall properties, HD-4670 can be used as a finish or a coating. This versatile urethane is ideally suited for use as an anti-fray finish on textile fabrics that must have an ultra-soft hand. HD-4670 is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance. The extremely low melt temperature also allows HD-4670 to be used as a heat sealable coating. Characteristics:
- Superior flexibility
- Ultra-soft, resilient, flexible, film
- Excellent UV-resistance
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low melting point (240°F)
-
A low cost, aromatic, polyether-based, aqueous polyurethane dispersion. HD-3011 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. CHARACTERISTICS:
- Medium soft, tough, flexible film
- Unusually dry surface for non-blocking applications
- High melting for thermal stability
- Can be crosslinked with melamines or aziridines for true thermoset character and increased adhesion.
- Excellent hydrolytic stability
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
Co-solvent free, soft, aliphatic, water-borne, polyurethane dispersion. HD-2024 was designed for use as a cost effective urethane for use in coatings or finishes for textile fabrics. This unique urethane dispersion is manufactured at high solids and without the use of solvent. HD-2024 is well suited for use as a strength additive for acrylic polymers. Whether used alone or as a strength additive, HD-2024 provides increased strength, anti-fray, and abrasion resistance properties at an affordable price. CHARACTERISTICS:
- Co-solvent free and high solids
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent UV resistance
- Excellent low temperature flexibility and crack resistance
- Very good abrasion resistance
-
A soft, aliphatic, polycarbonate-based, polyurethane dispersion. HD-2501 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:
- Maximum hydrolytic stability and oxidation resistance
- Outstanding toughness and abrasion resistance
- Good water and chemical resistance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
Tytan TNPT is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan CA 2E is a formulated catalyst suitable for ethylene dimerization process for high purity 1-butene production. The liquid phase catalyst could avoid isomerization of 1-butene to 2-butene.
-
Tytan AP110 is modified from Tytan AP100, which is aiming for better compatibility with various ink formulations. Tytan AP110 is proved offering the same adhesion performance as Tytan AP100, in addition, preventing the viscosity changed during printing process.