Shop

Co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. HD-2334 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. CHARACTERISTICS:

• Permanent, non-leaching flame-retardancy
• Contains no co-solvent< Good UV resistance
• Stiff, tough, flexible, dry film< High melting point (340°F)
• Good low temperature flexibility and crack resistance

A co-solvent free, flame retardant, aliphatic, aqueous polyurethane dispersion. HD-2313 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This unique urethane dispersion is manufactured at high solids and without the use of solvent. Low add-on levels of HD-2313 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302, & others. HD-2313 is well suited for use in textile coatings, such as automotive upholstery, that require outstanding strength and fire retardancy without the use of antimony-oxide/decabrome chemistry. Using HD-2313, a coating can be formulated to pass MVSS-302 and maintain required strength properties at a much lower coating weight than conventional coatings. This results in a much softer hand and possible cost savings. The high solids and solvent-free nature of HD-2313make it a very cost effective urethane. CHARACTERISTICS:

• Permanent, non-leaching flame retardancy
• Contains no co-solvent
• Excellent cost/performance ratio
• Soft, tough, flexible, dry film
• Excellent low temperature flex crack resistance

An aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. HD-2139was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. CHARACTERISTICS:

• High gloss
• Excellent mar and wear resistance
• Excellent resistance to staining
• Remarkably high balance of physical properties
• Contains n-methyl pyrrolidone (NMP) co-solvent

A hard, chemical-resistant, polyester-based, aliphatic, polyurethane dispersion. HD-2125was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. CHARACTERISTICS:

• Superior adhesion to PVC
• Excellent UV resistance
• Exceptional alcohol resistance
• Humidity resistance
• Contains n-methyl pyrrolidone co-solvent

An aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. HD-2107was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:

• Extreme toughness, abrasion and mar resistance
• Outstanding water and chemical resistance
• Excellent exterior weathering performance
• Can be crosslinked to enhance performance
• Dilution and clean-up with ordinary tap water
• Contains n-methyl pyrrolidone (NMP) co-solvent

A soft. aliphatic, polyester-based, aqueous polyurethane dispersion. HD-2101 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:

• Outstanding toughness and abrasion resistance
• Excellent water and chemical resistance
• Exceptionally high melting point for a medium soft polymer
• Can be crosslinked to enhance performance
• Dilution and clean-up with ordinary tap water
• Contains n-methyl pyrrolidone (NMP) co-solvent