-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
A non-silicone pure polyacrylic polymer leveling agent. Provides anti-cratering, leveling and improved substrate wetting. Delivers similar performance to fluorocarbon modified products.
-
A non-silicone pure polyester polymer leveling agent based on high molecular weight. Very good compatibility and leveling performance. Suitable for coil coatings, can coatings, polyurethanes, epoxies and other solvent-based coatings.
-
Polymetric fluorocarbon polyacrylic non-silicone slip and leveling agent. Very strong surface tension reduction properties. Excellent anti-cratering, substrate wetting and promotion of vertical flow. Can be used in all solvent-based systems. Best in car-refinish, plastic coatings and industrial coatings.
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Active ingedients: > 96% Refractive index: 1.44-1.46 Flash point: > 100 C Usage level: .2-.8 % total formulation
-
Organically modified polysiloxane for aqueous systems. Silicone based leveling, substrate wetting and anti-crater agent for aqueous coatings & inks without influent of inter-coat adhesion. AFCONA –3588 is a special designed polyether modified polysiloxane. It moves very fast in defective part of coatings, and can decrease the surface tension easily, and it has good compatibility properties. Hence, it is very effective in below properties for any water based systems: 1) Excellent anti-crater behavior. 2) Improved leveling. 3) Fast & better substrate wetting. 4) No inter-coat adhesion problems. 5) Little or no foam stabilization.
-
Organically modified polysiloxane slip and leveling agent for aqueous systems. Very strong surface tension reduction and good compatibility properties. Very fast substrate wetting and anti-crater performance in all water based systems.
-
Organically modified polysiloxane slip and leveling for water-based systems. 50% solution of 3580 in DMP.
-
Organically modified polysiloxane for aqueous systems. Short chain polysiloxane with no influence on intercoat adhesion in multi-coat systems. Very strong anti-cratering. Must be used in combination with a suitable defoamer. Recommended for electro deposition coatings and all other water-based systems.
-
Modified polysiloxane emulsion slip and leveling agent for water-based systems. (APE free) Good water resistance and slip performance. No foam stabilizing effect. High dosages provide water repellent effect.
-
Modified polyether polysiloxane silicone based polymer with di-hydroxyl functional groups terminated at both ends. This allows it to cross-link in polyurethane systems as well as in baking paints. Very high slip and leveling, 100% version of 3085.
