- Maximum hydrolytic stability and oxidation resistance
- Outstanding toughness and abrasion-resistance
- Good water and chemical resistance
- Can be crosslinked to enhance performance
- Co-solvent free, tin-free, APEO-free.
-
A soft, co-solvent free, aliphatic, polycarbonate-based polyurethane dispersion from Hauthaway. L-3529 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. It may be blended with L-3528 to increase hardness. CHARACTERISTICS
-
A soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion from Hauthaway. L-3121 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS
- Maximum hydrolytic stability and oxidation resistance Outstanding toughness and abrasion resistance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
-
An aliphatic, APEO-free, co-solvent free, polyether-based, polyurethane dispersion from Hauthaway. L-3037 was designed for base coats or intermediate coats intended for plating/embossing. Films based on this polymer exhibit excellent print retention properties. CHARACTERISTICS
- Excellent print retention properties
- Contains no co-solvent
- Produces soft, tough films
- Good water and solvent-resistance for a soft polymer Dries to clear, glossy film
-
An NMP-free/APEO-free aliphatic, polyester-based, polyurethane dispersion designed to produce unequaled clarity and gloss from Hauthaway. L-3040 was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. CHARACTERISTICS
- Wet look gloss
- Glass-like clarity
- Adhesion to a wide variety of substrates including wood, plastics, textiles, leather
- Dilution and clean up with ordinary tap water
- Contains dipropylene glycol dimethyl ether co-solvent
-
A hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675 from Hauthaway. L-3225 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS
- Self-coalescing at temperatures above 60° F
- Contains no co-solvent
- Produces clear, durable films with low levels of co-solvent (<100 g/l) Excellent non-yellowing properties
- Good water and chemical resistance
-
An aliphatic, co-solvent free, polyether-based, aqueous polyurethane dispersion from Hauthaway. L-2641 was designed for leather basecoat applications where plate-release and print retention are important. CHARACTERISTICS
- Contains no co-solvent
- Produces soft, tough films
- Good water and solvent-resistance for a soft polymer Dries to clear, glossy film
- Dilution and cleanup with water
-
An anionic, aliphatic, aqueous polyurethane dispersion from Hauthaway. L-2183 is an adhesive grade polyurethane suggested for modifying industrial laminating adhesives. L-2183 may also be used in low tack pressure sensitive applications. CHARACTERISTICS
- Low activation temperature (200 F)
- Can be crosslinked to improve bond strength and heat-resistance.
- Non-crystalline nature
- Contains n-methyl pyrrolidone co-solvent.
-
A high solids, anionic, aliphatic, aqueous polyurethane dispersion from Hauthaway. L-2255is an adhesive grade polyurethane suggested for industrial laminating applications. Suitable for bonding plasticized vinyl sheet to itself and to other substrates such as rubber, wood, cardboard and textiles. CHARACTERISTICS:
- High solids (48%), co-solvent free
- Can be crosslinked to improve bond strength and heat-resistance.
- Non-crystalline nature
-
An anionic, aliphatic, aqueous polyurethane dispersion with a low activation temperature from Hauthaway. L-2245 is an adhesive grade polyurethane suggested for industrial laminating applications where a pre-lamination coating is applied to a substrate and then dried. Ideal for bonding plasticized vinyl sheet to itself and to other substrates such as rubber, wood, cardboard and textiles. CHARACTERISTICS:
- May be crosslinked for improved adhesion and heat-resistance.
- Non-crystalline nature
- Low level of n-methyl pyrrolidone (NMP) co-solvent (~2%)
-
A hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties from Hauthaway. L-2877 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
- Balance of toughness, abrasion- and mar-resistance
- Outstanding water and chemical resistance
- Excellent exterior weathering performance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
-
A co-solvent free, polycarbonate-based, aliphatic, polyurethane dispersion from Hauthaway. L-3528 was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. L-3528 is ideally suited for exterior applications where film durability and longevity are important considerations. CHARACTERISTICS:
- Excellent exterior weathering durability
- Excellent humidity resistance
- Outstanding toughness and abrasion-resistance
- Co-solvent free, tin-free, APEO-free
-
A soft, halogen-free, flame retardant, aliphatic, polyurethane dispersion from Hauthaway. L-3192 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This unique urethane dispersion is manufactured at high solids and without the use of solvent. Low add-on levels of L-3192 will enable synthetic fabrics to pass various FR tests including NFPA-701 and MVSS-302. L-3192 is well suited for use in textile coatings, such as automotive upholstery, that require outstanding strength and flame retardancy. Using L-3192, a coating can be formulated to pass MVSS-302 and maintain required strength properties at a much lower coating weight than conventional coatings. This results in a much softer hand and possible cost savings. CHARACTERISTICS:
- Permanent, non-leaching flame retardancy
- Halogen-free
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent low temperature flex crack resistance
- Contains n-methyl pyrrolidone (NMP)