Solvent based

  • Pangel B-42 is a powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 provides a strongly pseudoplastic character, producing high consistency levels without affecting viscosity during application. It exhibits its high effectiveness as anti-settling additive in formulations with high solid contents. Use of Pangel B-42 has the following advantages against other conventional additives: • Coatings and paints- Prevents settling of pigments and fillers; controls sagging without aggravating leveling; high stability during transportation and storage. • Printing inks: Improves consistency and prevents settling of pigments. • Paint strippers: Improves stability and facilitates stripping action. • Sealants and joints: Improves wetting and suspension properties; controls sliding. • Others: Control of sagging and dripping; improves stability.  
  • TYTANTM Titanate Coupling & Dispersing Agent Titanate Coupling Agents are molecular bridges at the interface between inorganic filler such as CaCO3, BaSO4, graphite, carbon black, silica and metal oxide with polymer such as PP, PE, PVC, PBT, PET, ABS and rubbers. When incorporated into polymer systems, the coupling agent could improve filler loading, pigment dispersion, impact strength hence reduce embrittlement. Silane coupling agent only reacts with hydroxyl group on the filler surface via water condensation of silanol-siloxane process, therefore, it is suitable for glass, alumina hydroxide, magnesium hydroxide and metal powder etc. The advantage of titanate coupling agents is that they react not only with the hydroxyls but the free protons on the inorganic interface, which results in the formation of organic monomolecular layers on the inorganic surface forming the bonding for polymers.
  • Tytan S3 is an ethylacetoacetate titanate silane chelate used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. Tytan S3 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.
  • Tytan AP310 is an ethyl citrate titanium complex that can be used as an adhesion promoter for printing, crosslinker for paints and as a catalyst for esterification. Due to its chelated structure, Tytan AP310 shows delayed reaction at ambient temperature and thus facilitates storage stability of inks.
  • Tytan AP910D is an ethyl citrate zirconium that can be used as an adhesion promoter for printing, crosslinker for paints and as a catalyst for esterification. Due to its chelated structure, Tytan AP910D shows delayed reaction at ambient temperature and thus facilitates storage stability of inks. Compared with organo-titanate adhesion promoters, it shows good compatibility with PVB, CAB and CAP inks and provides minimal discoloration during the sterilizing process in the printing of milk pouches. As the temperature increases above 60oC, the zirconate can interact with functional groups such as -OH, -COOH, -NH2 in the polymer or substrate.
  • Tytan AP110 is modified from Tytan AP100, which is aiming for better compatibility with various ink formulations. Tytan AP110 is proved offering the same adhesion performance as Tytan AP100, in addition, preventing the viscosity changed during printing process.
  • Tytan CA 2E is a formulated catalyst suitable for ethylene dimerization process for high purity 1-butene production. The liquid phase catalyst could avoid isomerization of 1-butene to 2-butene.
  • Tytan TNPT is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
  • NexSil 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required.
  • NexSil 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required.
  • Fumed silica, treated, rheology additive Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • Fumed silica matting agent Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • Fumed silica untreated Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • Fumed silica, untreated Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • bulk density: +/- .6 g/cm3 Specific gravity: 2.2 g/cm3 Color: black w/metallic sheen pH: 6-7 free water: < 1% 95-99% purity expansion temps  150 to 200 C
  • Alumina powder that is dispersible in water or ethylene glycol.  For use in high temperature coating and as a binder
  • Fumed silica rheology additive, treated Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.      
  • Fumed silica matting agent Low gloss, good clarity    
  • D 50        11 microns surface area   250 m2/g pH        7.0
  • Fumed silica rheology additive Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.    
  • PANGEL B5 is a powdered additive with a high thickening and anti-settling capacity for low polarity systems, particularly recommended for systems based on both aliphatic solvents and mineral or synthetic oils used as vehicle in liquid formulations.

    Properties

    PANGEL B5 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on both aliphatic type solvents and mineral or synthetic oils. PANGEL B5 shows high thickening capacity in low polarity systems without the use of a polar activator for its dispersion. Use of PANGEL B5 has the following advantages against other conventional additives:
    • Decrease of sedimentation
    • High thickening capacity
    • Does not require polar activator
    • High capacity for thikening inverted emulsions
    • Control of sagging and dripping while improves stability.

    Fields of application

    • Oil based concentrated formulations
    • Formulations based in inverted emulsions
  • Pangel B-10 is a powdered additive with a high thickening and anti-settling capacity for intermediate-low polarity systems, particularly recommended for systems based on white spirit type solvents.
  • Rheological additive for intermediate polarity systems. PANGEL B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. Properties PANGEL B20 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, PANGEL B20 does not require the use of a polar activator for its dispersion. PANGEL B20 provides a strongly pseudoplastic character, producing high consistency levels without affecting viscosity during application. It exhibits its high effectiveness as anti-settling additive in formulations with high solid contents. Use of PANGEL B20 has the following advantages against other conventional additives: •Coatings and paints: Prevents settling of pigments and fillers; controls sagging without aggravating leveling; high stability during transportation and storage. •Printing inks: Improves consistency and prevents settling of pigments. •Unsaturated polyester putties: Improves consistency and workability. •Paint strippers: Improves stability and facilitates stripping action.•Greases based on vegetal oil: High thickening capacity; good stability at high temperature. •Asphalt coatings: High thickening capacity; application in thicker layers; sagging control. • Sealants and joints: Improves wetting and suspension properties; controls sliding. •Others: Control of sagging and dripping; improves stability