-
Cationic/anionic co-polymer with pigment affinity groups for wetting and dispersing in solvent-based systems. Improved version of 5207 with broader resin compatibility. Offers near-HMWD performance at a price point closer to conventional agents.
-
Special block-copolymer for wetting and dispersing in solvent & water-based primers and high filler loads. Good viscosity depresser and mattting.
-
Polymer with pigment affinity groups suitable for all solvent-based systems ranging from low to high polar, including air dry alkyd. Very good pigment stability, good viscosity and high color strength. Supplied as a 100% dispersant, making it an excellent dispersant for polyurethane, epoxy and UV coatings.
-
Fatty acid modified polyester emulsifier. It is recommended to improve color acceptance of colorants in base paints. The use in colored NC can improve the gloss. 96% active.
-
Fatty acid modified polyester improved pigment stability over 6220. Color acceptance aid & dispersant for all kinds of pigments for water & solvent-based systems. Can be used to formulate resin free universal colorants. 96% active.
-
Fatty acid modified polyester. Improved hydrophilicity over 6225. Yields better color strength, viscosity reduction, pigment stability and better color acceptance in water and solvent-based paints.
-
Based on ketoxime and phosphorous ester salt. Anti-gelling agent for air-drying alkyd and baking paints. In air-drying alkyds, the ketoxime forms a protective layer on the top of the paint to reduce oxidation.
-
Pigment synergist for pthalocyanine, carbon black and violet pigments. To be used in combination with a HMW dispersant. Lowers viscosity of the mill base, improves gloss, jetness & pigment stability.
-
A potassium salt of an organic phosphate ester used as a hydrotrope for acid and alkaline systems where low foam is desirable. Soluble in water, alcohols and glycols. It is insoluble in oils and solvents.
-
Alumina powder that is dispersible in water or ethylene glycol. For use in high temperature coating and as a binder
-
NexSil 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required.
-
NexSil 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required.
-
bulk density: +/- .6 g/cm3 Specific gravity: 2.2 g/cm3 Color: black w/metallic sheen pH: 6-7 free water: < 1% 95-99% purity expansion temps 150 to 200 C
-
Pangel B-10 is a powdered additive with a high thickening and anti-settling capacity for intermediate-low polarity systems, particularly recommended for systems based on white spirit type solvents.
-
Rheological additive for intermediate polarity systems. PANGEL B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. Properties PANGEL B20 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, PANGEL B20 does not require the use of a polar activator for its dispersion. PANGEL B20 provides a strongly pseudoplastic character, producing high consistency levels without affecting viscosity during application. It exhibits its high effectiveness as anti-settling additive in formulations with high solid contents. Use of PANGEL B20 has the following advantages against other conventional additives: •Coatings and paints: Prevents settling of pigments and fillers; controls sagging without aggravating leveling; high stability during transportation and storage. •Printing inks: Improves consistency and prevents settling of pigments. •Unsaturated polyester putties: Improves consistency and workability. •Paint strippers: Improves stability and facilitates stripping action.•Greases based on vegetal oil: High thickening capacity; good stability at high temperature. •Asphalt coatings: High thickening capacity; application in thicker layers; sagging control. • Sealants and joints: Improves wetting and suspension properties; controls sliding. •Others: Control of sagging and dripping; improves stability
-
Pangel B-42 is a powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 provides a strongly pseudoplastic character, producing high consistency levels without affecting viscosity during application. It exhibits its high effectiveness as anti-settling additive in formulations with high solid contents. Use of Pangel B-42 has the following advantages against other conventional additives: • Coatings and paints- Prevents settling of pigments and fillers; controls sagging without aggravating leveling; high stability during transportation and storage. • Printing inks: Improves consistency and prevents settling of pigments. • Paint strippers: Improves stability and facilitates stripping action. • Sealants and joints: Improves wetting and suspension properties; controls sliding. • Others: Control of sagging and dripping; improves stability.
-
PANGEL B5 is a powdered additive with a high thickening and anti-settling capacity for low polarity systems, particularly recommended for systems based on both aliphatic solvents and mineral or synthetic oils used as vehicle in liquid formulations.
Properties
PANGEL B5 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on both aliphatic type solvents and mineral or synthetic oils. PANGEL B5 shows high thickening capacity in low polarity systems without the use of a polar activator for its dispersion. Use of PANGEL B5 has the following advantages against other conventional additives:- Decrease of sedimentation
- High thickening capacity
- Does not require polar activator
- High capacity for thikening inverted emulsions
- Control of sagging and dripping while improves stability.
Fields of application
- Oil based concentrated formulations
- Formulations based in inverted emulsions
-
PANGEL OM4 is a rheological additive based upon a highly purified bentonite clay designed for low polarity systems. PANGEL OM4 is recommended for both aliphatic solvents and mineral or synthetic oils. Pangel OM4 requires the use of polar activators.
Properties PANGEL OM4 is an organobentonite recommended for providing the following properties in oil based systems:
- Decrease of sedimentation
- High thickening capacity
- Does not require polar activator
- High capacity for thikening inverted emulsions
- Control of sagging and dripping while improves stability.
Fields of application
Use of PANGEL OM4 as a rheological additive is recommended in the following applications:- Oil based concentrated formulations
- Formulations based in inverted emulsions
-
PANGEL OM8 is a rheological additive for low to medium polarity systems based upon highly purified bentonite clay. PANGEL OM8 is particularly recommended for systems based on resins such as polyurethanes, acrylics, polyesters, epoxy esters and alkyds.
Properties
PANGEL OM8 is an organobentonite recommended for providing the following properties in intermediate polarity systems:- Thixotropic and pseudoplastic effects.
- Sag control.
- Excellent levelling.
- Prevents pigment from long-term storage settling.
Fields of application
Use of PANGEL OM8 as a rheological additive is recommended in the following applications:- Anti-corrosive paints.
- Polyester coatings.
- Primers.
- Industrial finishes.
- Road marking paints.
- Bituminous undercoats.
- Varnishes.
- Inks.
-
PANGEL OMD1 is self-dispersing rheological additive for medium to low polarity systems, based upon a highly purified bentonite clay. PANGEL OMD1 is recommended for both aliphatic solvents and mineral or synthetic oils.
Properties
PANGEL OMD1 is an easy-to-disperse self-activated organobentonite, that is recommended for providing the following properties in solvent-borne systems:- Thixotropic and pseudoplastic effects.
- Sag control.
- Excellent levelling.
- Prevents pigment from long-term storage settling.
- No need of pregelling or the use of polar activators.
Fields of application
Use of PANGEL OMD1 as a rheological additive is recommended in the following applications:- Anti-corrosive paints.
- Polyester coatings.
- Primers.
- Industrial finishes.
- Road marking paints.
- Varnished.
- Lubricating greases.
- Bituminous undercoats.
-
PANGEL OMD2 is a rheological additive for medium to high polarity systems, based upon highly purified bentonite clay. PANGEL OMD2 can be used for alcohols, esters and glycols. Moderate polarity binders are also compatible.
Properties
PANGEL OMD2 is an easy-to-disperse self-activated organobentonite that is recommended for providing the following properties in solvent-borne systems:- Thixotropic and pseudoplastic effects.
- Sag control.
- Excellent levelling.
- Prevents pigment from long-term storage settling.
- No need of pregelling or the use of polar activators.
Fields of application
Use of PANGEL OMD2 as a rheological additive is recommended in the following applications:- Anti-corrosive paints.
- Adhesives.
- Industrial finishes.
- Maintenance coatings.
- Epoxy based coatings.
- Paint removers.
-
Fumed silica rheology additive, treated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
