defoamers

  • Silicone-free defoaming substance This defoamer is recommended for systems where in-can transparency is important. AFCONA-2018 is a silicone-free defoamer for various coating systems. It prevents the entrapment of air during processing steps such as stirring or pumping.It also functions well during the application of paints and lacquers.AFCONA-2018 is extremely suitable for use in clear and high gloss coatings because of itsexcellentcompatibility properties. It is also suitable for thick,clear coatings applied by conventional spraying where dry film transparency is very important.AFCONA-2018 is well-suited for solvent-based wood finishes wherefoamingisa problem when applied by spraying.AFCONA-2018 is especially suitable for the systems listed below whentransparency (in-can and dry film) and good defoaming power areimportant:1)polyurethane coatings for wood (not including acrylic-basedsystems)2)acid-curedcoatings for wood and etching/wash primers3)NC lacquers for woodDue to itsgood compatibility, AFCONA-2018 also can be used in resin manufacturing as a pre-added defoamer, except for acrylic-OH
  • A non-silicone polymer defoamer for solvent-based systems. Very good compatibility and is extremely suitable for clear and high-gloss coating applications.
  • Non-silicone modified polyvinyl polymer. May cause some haziness in clear systems. Widely used in NC and AC lacquer wood finishes especially applied by curtain coater.
  • Silicone modified polysiloxane defoamer and deaerator for solvent-based systems. Uses included polyurethane, baking paints and curtain coating applications.
  • Silicone based modified polysiloxane defoamer and deaerator. Very good defoaming and compatibility balance. Works well with polyurethane, NC & AC wood coatings and air-drying long oil and medium oil alkyds.
  • Silicone based fluorocarbon modified polysiloxane defoamer and deaerator for solvent-based systems. Very broad application from low to high polar systems. Suitable for physical drying systems and air-drying alkyds.
  • Silicone based fluorocarbon modified polysiloxane defoamer and deaerator for solvent-based systems. Suitable for use in all printing ink systems ranging from offset, grauvre, flexo and UV systems.
  • Silicone based modified polysiloxane defoamer and deaerator for solvent-based systems. Works as a post-add to break foam generated in processing.
  • Silicone fluorocarbon modified polysiloxane defoamer and deaertor in solvent-based systems. Universal defoamer for all systems low to high polar. Uses include, air-drying alkyds, physical drying systems, wood coatings, vehicle refinish and general industrial coatings.
  • Silicone-based modified polysiloxane defoamer and deaerator for solvent-based systems. Recommended for clear coats. Best performing in polyurethane, epoxy, UV and UPE systems.
  • Silicone-based modified polysiloxane defoamer and deaerator for solvent-based systems. Has additional leveling properties in comparison to 2035.
  • Silicone-based modified polysiloxane defoamer and deaerator for solvent-based systems. Best suitable for medium to high polar systems such as epoxy, TPA and unsaturated polyesters. Outstanding in polyurethane systems.

Title