-
Fatty acid modified polyester. Improved hydrophilicity over 6225. Yields better color strength, viscosity reduction, pigment stability and better color acceptance in water and solvent-based paints.
-
Fatty acid modified polyester improved pigment stability over 6220. Color acceptance aid & dispersant for all kinds of pigments for water & solvent-based systems. Can be used to formulate resin free universal colorants. 96% active.
-
Fatty acid modified polyester emulsifier. It is recommended to improve color acceptance of colorants in base paints. The use in colored NC can improve the gloss. 96% active.
-
Special block-copolymer solvent-free dispersing agent for preparation of solvent and water-based pigment concentrates. Suitable for all type of pigments. Compatible with many let-down systems.
-
Solution of a sodium salt of an acrylic polymeric dispersing and wetting agent for water-based systems. Especially suitable for dispersion of inorganic pigments and fillers. Improved storage stability of both pigment dispersion and formulated paint. No adverse reaction to high temperatures or pH drift.
-
Non-ionic acetylenic diol based surfactant dispersing agent for water-based systems. A multi-functional additive, helps wet out difficult or contaminated substrates, lowers the surface tension of the system, improves pigment grind efficiency and prevents surface defects such as fisheyes, edge crawl and craters. Acts as a defoamer and due to its hydrophobic nature, reduces water sensitivity of the final system.
-
Polymer with pigment affinity groups suitable for all solvent-based systems ranging from low to high polar, including air dry alkyd. Very good pigment stability, good viscosity and high color strength. Supplied as a 100% dispersant, making it an excellent dispersant for polyurethane, epoxy and UV coatings.
-
Special block-copolymer for wetting and dispersing in solvent & water-based primers and high filler loads. Good viscosity depresser and mattting.
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Cationic/anionic co-polymer with pigment affinity groups for wetting and dispersing in solvent-based systems. Improved version of 5207 with broader resin compatibility. Offers near-HMWD performance at a price point closer to conventional agents.
-
HMW carboxylic acid polymer for wetting and dispersing in solvent-based systems. Suitable to stabilize transparent iron oxide pigments. Can be used as a dispersant for other inorganic pigments and extenders to reduce the dispersion viscosity, making it useful in highly filled systems.
-
Unsaturated polyamide and acid ester salt for wetting and dispersing in solvent-based systems.
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Acidic polyester phosphorous wetting and dispersing agent for both water and solvent-based systems. 100% active version of 5010.
-
Fatty acid modified polyamide economical grade wetting and dispersing agent for solvent-based pigment dispersions. Designed to replace first-generation products such as 5044, 5054, 5207. Stabilizes pigments through electrical charge repulsion forces. Very effective in bentonite gel preparation. 100% active version of 5009.
-
OH-functional unsaturated modified carboxylic acid for wetting and dispersing in solvent-based systems. Designed for stabilization of all kinds of pigments in air-drying alkyds.
-
Alkylol ammonium salt of a HMW carboxylic acid wetting and dispersing agent for water and solvent-based systems. Very good anti-settling effect. Extremely suitable for wash primers.
-
HMW unsaturated carboxylic acid wetting and dispersing agent for solvent-based systems. Silicone-free version of 5065, no foam stabilizing effect. Stronger anti-settling properties.
-
HMW unsaturated carboxylic acid with polysiloxane wetting and dispersing agent for solvent-based systems. An effective co-grinding agent, containing polysiloxane. Can be used as a post-add to correct floating and flooding problems. Can give foam stabilizing effect due to the silicone modification.
-
HMW carboxylic acid salt wetting and dispersing agent for solvent-based systems. Higher polarity compared to 5044. Used in low to medium polar systems. Can cause yellowing in NC. Most recommended for bentonite gel preparations.
-
Unsaturated polyamide and acid ester salt universal dispersant for solvent-based systems. Can be used to prepare bentonite gels.
-
Amine rich polymer of carboxylic acid and polyamide dispersing agent for carbon blacks and organic pigments. Specifically for artificial leather, polyurethane, alkyd, polyamide and printing ink systems.
-
Solution of acidic polyester phosphorous dispersing and wetting agent specifically designed for pure white paints in solvent-based systems. Very good viscosity reduction. Suitable for most solvent-based systems. Not suitable for air-drying ink systems.
-
Universal unsaturated polyamide and acid ester salt dispersant and wetting agent for all solvent-based systems. Can be used to prepare bentointe gels. An economic replacement for 5044.
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Modified polyacrylate polymer based on CRP (Controlled Radical Polymerization) technology. Offers excellent performance in stabilizing both inorganic and organic pigments. Very good stability performance in carbon black dispersions, where very high jetness can be achieved. In metallic systems, it gives a golden undertone for high channel black dispersions.
-
Modified polyacrylate polymeric dispersant based on CRP (Controlled Radical Polymerization) technology for solvent-based systems. High molecular weight working towards deflocculation of all types of pigments. Offers excellent performance in stabilizing both inorganic and organic pigments; very good stability performance in carbon black dispersions, where very high jetness can be achieved. In metallic systems, it gives a golden undertone for high channel black dispersions.
-
Dispersant for universal colorants for architectural applications and water based systems. Recommended for all types of pigments including transparent iron oxides. Does not need to be pre-neutralized.
-
Special bloc-copolymer dispersant for water-based systems. Designed with superior water-resistance. Designed for use in both architectural paints and general industrial coatings as well as water-based colorants. Yields lower viscosity, stable dispersions with higher color strength and good in-can stability.
-
Modified polyacrylic polymeric dispersant for water-based systems. Improved version of 4560 that gives better viscosity depression on pigments, especially carbon blacks and transparent iron oxides. More effective dispersant for colorants within water-based systems.
-
High molecular weight dispersant that is pH independent for all pigments. Can be used in resin free concentrates. Also used for color acceptance in let down media.
-
Modified polyacrylic polymeric dispersant for water-based systems. Wide compatibility in decorative and industrial coatings for all kinds of pigments. Completely water-soluble and can be neutralized to improve viscosity reduction performance.
-
Modified polyacrylic polymeric dispersant for water-based systems within architectural paints & industrial coatings. can be used to formulate resin-free pigment concentrates.
-
Modified polyacrylic polymeric dispersant for water-based systems in all kinds of pigments within industrial coatings. Can be used to formulate resin-free pigment concentrates.
-
Modified polyacrylic polymeric dispersant for solvent-based systems (low to high polarity including TPA). High thixotrophy resulting in higher grind viscosity compared to polyurethane-based dispersants. Improves gloss, DOI and color strength while reducing flooding & floating.
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
