-
Modified polyether polysiloxane silicone developed for high-slip applications where foam stabilization is undesirable. Good transparency, effective in all solvent-based coatings such as NC, AC, polyurethane and baking paints.
-
Modified polyether polysiloxane silicone with improved leveling and anti-crater performance in polyurethane and UV coatings from 3250.
-
Short-chain modified polysiloxane silicone. Recoatable, will not influence intercoat adhesion. Recommended for baking paints based on alkyd-melamine, oil-free polyesters and thermosetting acrylics. Improves hot water soaking resistance.
-
Modified polyether polysiloxane silicone based polymer with di-hydroxyl functional groups terminated at both ends. This allows it to cross-link in polyurethane systems as well as in baking paints. Very high slip and leveling, 100% version of 3085.
-
Modified polyurethane polymer dispersant for solvent based systems. Mainly used in preparation of pigment concentrates due to good compatibility and price advantage. Can be utilized as a dispersant in normal grinding, especially for inorganic pigments.
-
Modified polyurethane polymer dispersant for solvent-based systems. Perfect for inorganic pigments, especially Ti02 and matting agents. Widely used as dispersant for inorganic pigment for pigment concentrate preparation.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Developed for co-grinding purposes for coil and can coatings, baking polyesters or acrylics, epoxies and polyurethane systems. Best co-grinding agent Afcona has to offer.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Universal and efficient for all pigments, including organic and carbon black. Improves dry film gloss and prevents floating/flooding.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Higher molecular weight compared to 4046. Improves dispersing performance, especially with carbon black pigments to provide higher jetness. First choice for high end applications such as OEM, refinish and industrial coatings.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Lower-cost alternative to 4046. Very good dispersing for broad range of pigments. Recommended for polyurethane, baking paint and epoxy.
-
Modified polyurethane polymeric dispersant for medium to low-polar, solvent-based systems. Suitable for can or coil coatings and polyester resin systems.
-
BTX-free modified polyurethane polymeric dispersant for solvent-based systems. Very effective in inorganic, organic pigments and carbon black dispersion preparation. Very-effective 3-dimensional steric hindrance design allows for good stability for all pigments. Very good viscosity reduction and improved color strength.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Improved version of 4070 with no crystallizing problem and supplied in higher solids (45%). Recommended for refinish, can coatings, dispersion of transparent iron oxide and other industrial coatings and pigment concentrate preparations.
-
Modified polyurethane polymeric dispersant for solvent-based systems. High molecular weight with very good pigment stability performance. Designed for organic reds and other difficult-to-disperse pigments. Recommended for epoxies, coil coatings, fluorocarbon coatings and other high quality applications.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Supplied in 100% active form. Recommended for solvent-free systems where conventional wetting and dispersing agents cannot perform with organic pigments and carbon blacks. Extremely good compatibility with thermoplastic acrylic, NC and CAB. Great for ink dispersions also.
-
Modified polyacrylic polymeric dispersant for solvent-based systems (low to high polarity including TPA). High thixotrophy resulting in higher grind viscosity compared to polyurethane-based dispersants. Improves gloss, DOI and color strength while reducing flooding & floating.
-
Universal unsaturated polyamide and acid ester salt dispersant and wetting agent for all solvent-based systems. Can be used to prepare bentointe gels. An economic replacement for 5044.
-
Solution of acidic polyester phosphorous dispersing and wetting agent specifically designed for pure white paints in solvent-based systems. Very good viscosity reduction. Suitable for most solvent-based systems. Not suitable for air-drying ink systems.
-
Amine rich polymer of carboxylic acid and polyamide dispersing agent for carbon blacks and organic pigments. Specifically for artificial leather, polyurethane, alkyd, polyamide and printing ink systems.
-
Unsaturated polyamide and acid ester salt universal dispersant for solvent-based systems. Can be used to prepare bentonite gels.
-
HMW carboxylic acid salt wetting and dispersing agent for solvent-based systems. Higher polarity compared to 5044. Used in low to medium polar systems. Can cause yellowing in NC. Most recommended for bentonite gel preparations.
-
HMW unsaturated carboxylic acid with polysiloxane wetting and dispersing agent for solvent-based systems. An effective co-grinding agent, containing polysiloxane. Can be used as a post-add to correct floating and flooding problems. Can give foam stabilizing effect due to the silicone modification.
-
HMW unsaturated carboxylic acid wetting and dispersing agent for solvent-based systems. Silicone-free version of 5065, no foam stabilizing effect. Stronger anti-settling properties.
-
Alkylol ammonium salt of a HMW carboxylic acid wetting and dispersing agent for water and solvent-based systems. Very good anti-settling effect. Extremely suitable for wash primers.
-
OH-functional unsaturated modified carboxylic acid for wetting and dispersing in solvent-based systems. Designed for stabilization of all kinds of pigments in air-drying alkyds.
-
Fatty acid modified polyamide economical grade wetting and dispersing agent for solvent-based pigment dispersions. Designed to replace first-generation products such as 5044, 5054, 5207. Stabilizes pigments through electrical charge repulsion forces. Very effective in bentonite gel preparation. 100% active version of 5009.
-
Acidic polyester phosphorous wetting and dispersing agent for both water and solvent-based systems. 100% active version of 5010.
-
Unsaturated polyamide and acid ester salt for wetting and dispersing in solvent-based systems.
-
HMW carboxylic acid polymer for wetting and dispersing in solvent-based systems. Suitable to stabilize transparent iron oxide pigments. Can be used as a dispersant for other inorganic pigments and extenders to reduce the dispersion viscosity, making it useful in highly filled systems.
-
Cationic/anionic co-polymer with pigment affinity groups for wetting and dispersing in solvent-based systems. Improved version of 5207 with broader resin compatibility. Offers near-HMWD performance at a price point closer to conventional agents.
-
Special block-copolymer for wetting and dispersing in solvent & water-based primers and high filler loads. Good viscosity depresser and mattting.
-
Polymer with pigment affinity groups suitable for all solvent-based systems ranging from low to high polar, including air dry alkyd. Very good pigment stability, good viscosity and high color strength. Supplied as a 100% dispersant, making it an excellent dispersant for polyurethane, epoxy and UV coatings.
-
High molecular weight dispersant with solid surface affinity groups. Gives excellent wetting to the fiberglass leading to faster wetting of resin to the fiber glass & eventually gives better bonding strength & performance in the final product.
-
Polyether polymer modification with acidic groups for dispersing in solvent-based paints. Specially developed for PVC, UPE and PU foam systems where it can help to disperse filler and inorganic pigment in the system with good viscosity reduction & extender dispersions.
-
BIOTREND® ZP + is a industrial preservative containing the active ingredient Zinc Pyrithione. Zinc Pyrithione is used to prevent microbial degradation and deterioration of manufacturing starting materials such as plastics, polymers, and latexes, and in a wide range of finished articles made from these starting materials. The chemical acts to prevent the growth of bacteria, fungi, mildew, and algae that can cause various types of deterioration such as discoloration, staining, odors, etc.
