-
Care Care Drying Aid Accoquat CS ULTRA NF is a unique nonflammable proprietary blend of cationic and nonionic emulsifiers and is especially designed for micro-emulsification of mineral seal oils (MSO) or other organic hydrophobes. Features & Benefits: Works effectively for microemulsification of a variety of hydrophobes including mineral seal oil, waxes, and silicones
-
Modified polysiloxane with fine silica for water-based systems. Very high resistance to shear forces and temperature.
-
Modified polysiloxane defoamer for water-based applications. Used as a preparation of pigment concentrates.
-
Modified polysiloxane defoamer and deaerator for water-based systems. Best in polyurethane dispersions. Good defoaming as well as leveling and anti-crater action. Very easy to incorporate, even in low-shear conditions.
-
Polysiloxane modified polymer defoamer and deaerator for water-based systems with broad compatibility. Does not introduce haze. Best added as post-add, or in low shear conditions.
-
Modified polysiloxane emulsion slip and leveling agent for water-based systems. (APE free) Good water resistance and slip performance. No foam stabilizing effect. High dosages provide water repellent effect.
-
Organically modified polysiloxane for aqueous systems. Short chain polysiloxane with no influence on intercoat adhesion in multi-coat systems. Very strong anti-cratering. Must be used in combination with a suitable defoamer. Recommended for electro deposition coatings and all other water-based systems.
-
Organically modified polysiloxane slip and leveling for water-based systems. 50% solution of 3580 in DMP.
-
Organically modified polysiloxane slip and leveling agent for aqueous systems. Very strong surface tension reduction and good compatibility properties. Very fast substrate wetting and anti-crater performance in all water based systems.
-
Active ingedients: > 96% Refractive index: 1.44-1.46 Flash point: > 100 C Usage level: .2-.8 % total formulation
-
Modified polyacrylic polymeric dispersant for water-based systems in all kinds of pigments within industrial coatings. Can be used to formulate resin-free pigment concentrates.
-
Modified polyacrylic polymeric dispersant for water-based systems within architectural paints & industrial coatings. can be used to formulate resin-free pigment concentrates.
-
Modified polyacrylic polymeric dispersant for water-based systems. Wide compatibility in decorative and industrial coatings for all kinds of pigments. Completely water-soluble and can be neutralized to improve viscosity reduction performance.
-
High molecular weight dispersant that is pH independent for all pigments. Can be used in resin free concentrates. Also used for color acceptance in let down media.
-
Modified polyacrylic polymeric dispersant for water-based systems. Improved version of 4560 that gives better viscosity depression on pigments, especially carbon blacks and transparent iron oxides. More effective dispersant for colorants within water-based systems.
-
Special bloc-copolymer dispersant for water-based systems. Designed with superior water-resistance. Designed for use in both architectural paints and general industrial coatings as well as water-based colorants. Yields lower viscosity, stable dispersions with higher color strength and good in-can stability.
-
Dispersant for universal colorants for architectural applications and water based systems. Recommended for all types of pigments including transparent iron oxides. Does not need to be pre-neutralized.
-
Non-ionic acetylenic diol based surfactant dispersing agent for water-based systems. A multi-functional additive, helps wet out difficult or contaminated substrates, lowers the surface tension of the system, improves pigment grind efficiency and prevents surface defects such as fisheyes, edge crawl and craters. Acts as a defoamer and due to its hydrophobic nature, reduces water sensitivity of the final system.
-
Solution of a sodium salt of an acrylic polymeric dispersing and wetting agent for water-based systems. Especially suitable for dispersion of inorganic pigments and fillers. Improved storage stability of both pigment dispersion and formulated paint. No adverse reaction to high temperatures or pH drift.
-
Special block-copolymer solvent-free dispersing agent for preparation of solvent and water-based pigment concentrates. Suitable for all type of pigments. Compatible with many let-down systems.
-
Fatty acid modified polyester emulsifier. It is recommended to improve color acceptance of colorants in base paints. The use in colored NC can improve the gloss. 96% active.
-
Fatty acid modified polyester improved pigment stability over 6220. Color acceptance aid & dispersant for all kinds of pigments for water & solvent-based systems. Can be used to formulate resin free universal colorants. 96% active.
-
Fatty acid modified polyester. Improved hydrophilicity over 6225. Yields better color strength, viscosity reduction, pigment stability and better color acceptance in water and solvent-based paints.
-
Antiflash- Rust inhibitor for ferrous and non ferrous substrates. This is a ready to use, liquid form antiflash inhibitor for any water based coatings. This product is VOC free, does not cause water sensitivity, and is compatible with a wide range of binders.
-
Ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. Hydrophobic agent protecting the almost dry film under severe conditions of ambient humidity. Corrosion inhibitor for metal packaging protection. • Ready-to-use aqueous liquid • voc-free • Doesn’t lead to water sensitivity of the coating • Contains bio-based substances • Usable for ferrous and galvanized steel substrates • Compatible with a very wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds, …)
-
FUNCTION Ready-to-use, liquid-form and organic corrosion inhibitor for ferrous metals and non-ferrous alloys based on aluminium, magnesium, copper, zinc or nickel. Can be used in low acid-to-alkaline aqueous solutions. APPLICATION Mainly used in : • Aqueous cleaners or paint removers in contact with metal substrates ; • Maintenance products or renovators for light metals (polish, de-icing fluids, leak dectectors,…) ; • Metallic waterborne coatings formulations containing aluminium pigments/flakes. FEATURES • Fully water-soluble liquid • Non-foaming • VOC-free • Non-flammable • Stable in hard waters • Free of bore, molybdate, silicate or nitrite • Exclusively made from authorized substances for food-contact cleaners*
-
Ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. Hydrophobic agent protecting the almost dry film under severe conditions of ambient humidity. Corrosion inhibitor for metal packaging protection. Ready-to-use aqueous liquid • VOC-free • Doesn’t lead to water sensitivity of the coating • Usable for ferrous and non-ferrous metals (aluminium, copper, zinc, brass) • Compatible with a very wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds, …)
-
Ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. Corrosion inhibitor for metal packaging protection. • Ready-to-use aqueous liquid • VOC-free • Doesn’t lead to water sensitivity of the coating • Usable for ferrous and galvanized steel substrates • Compatible with a very wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds, …)
-
Ready-to-use, liquid-form flash-rust inhibitor for any waterborne coating. Corrosion inhibitor for metal packaging protection. APPLICATION Any type of waterbone paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself use : • Paints • Thick-coatings • Varnishes • Stains • Mastics • Glues... FEATURES • Ready-to-use aqueous liquid • VOC-free • Improves coating’s water resistance • Usable for ferrous and galvanized steel substrates • Compatible with a very wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds, …)
-
Ready-to-use, liquid-form antiflash-rust additive for all waterborne coatings. Hydrophobic agent protecting almost dry films under severe conditions of ambient humidity. Corrosion inhibitor for metal packaging protection. APPLICATION Any type of waterbone paint or coating, neutral or alkaline, for professional or do-it-yourself uses : • Paints • Thick-coatings • Varnishes • Stains • Mastics • Glues... FEATURES • Ready-to-use aqueous liquid • VOC-free • Does not cause coating’s water sensitivity • Usable in labelled* paints • Usable on ferreous and galvanized steel substrates • Compatible with a wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds
