-
Polysiloxane modified polymer defoamer and deaerator for water-based systems with broad compatibility. Does not introduce haze. Best added as post-add, or in low shear conditions.
-
Modified polysiloxane with fine silica for water-based systems. Very high resistance to shear forces and temperature.
-
Modified polysiloxane defoamer and deaerator for water-based systems. Best in polyurethane dispersions. Good defoaming as well as leveling and anti-crater action. Very easy to incorporate, even in low-shear conditions.
-
Modified polysiloxane defoamer for water-based applications. Used as a preparation of pigment concentrates.
-
Fatty acid modified polyester improved pigment stability over 6220. Color acceptance aid & dispersant for all kinds of pigments for water & solvent-based systems. Can be used to formulate resin free universal colorants. 96% active.
-
Special block-copolymer solvent-free dispersing agent for preparation of solvent and water-based pigment concentrates. Suitable for all type of pigments. Compatible with many let-down systems.
-
Solution of a sodium salt of an acrylic polymeric dispersing and wetting agent for water-based systems. Especially suitable for dispersion of inorganic pigments and fillers. Improved storage stability of both pigment dispersion and formulated paint. No adverse reaction to high temperatures or pH drift.
-
Non-ionic acetylenic diol based surfactant dispersing agent for water-based systems. A multi-functional additive, helps wet out difficult or contaminated substrates, lowers the surface tension of the system, improves pigment grind efficiency and prevents surface defects such as fisheyes, edge crawl and craters. Acts as a defoamer and due to its hydrophobic nature, reduces water sensitivity of the final system.
-
Special bloc-copolymer dispersant for water-based systems. Designed with superior water-resistance. Designed for use in both architectural paints and general industrial coatings as well as water-based colorants. Yields lower viscosity, stable dispersions with higher color strength and good in-can stability.
-
High molecular weight dispersant that is pH independent for all pigments. Can be used in resin free concentrates. Also used for color acceptance in let down media.
-
Modified polyacrylic polymeric dispersant for water-based systems. Wide compatibility in decorative and industrial coatings for all kinds of pigments. Completely water-soluble and can be neutralized to improve viscosity reduction performance.
-
Modified polyacrylic polymeric dispersant for water-based systems within architectural paints & industrial coatings. can be used to formulate resin-free pigment concentrates.
-
Organically modified polysiloxane for aqueous systems. Short chain polysiloxane with no influence on intercoat adhesion in multi-coat systems. Very strong anti-cratering. Must be used in combination with a suitable defoamer. Recommended for electro deposition coatings and all other water-based systems.
-
Modified polysiloxane emulsion slip and leveling agent for water-based systems. (APE free) Good water resistance and slip performance. No foam stabilizing effect. High dosages provide water repellent effect.
-
Fatty acid modified polyester emulsifier. It is recommended to improve color acceptance of colorants in base paints. The use in colored NC can improve the gloss. 96% active.
-
Fatty acid modified polyester. Improved hydrophilicity over 6225. Yields better color strength, viscosity reduction, pigment stability and better color acceptance in water and solvent-based paints.
-
Modified polyacrylic polymeric dispersant for water-based systems in all kinds of pigments within industrial coatings. Can be used to formulate resin-free pigment concentrates.
-
Modified polyacrylic polymeric dispersant for water-based systems. Improved version of 4560 that gives better viscosity depression on pigments, especially carbon blacks and transparent iron oxides. More effective dispersant for colorants within water-based systems.
-
Organically modified polysiloxane slip and leveling agent for aqueous systems. Very strong surface tension reduction and good compatibility properties. Very fast substrate wetting and anti-crater performance in all water based systems.
-
Organically modified polysiloxane slip and leveling for water-based systems. 50% solution of 3580 in DMP.
-
Tytan coupling agents can enhance the dispersion of inorganic fillers in polymer systems such as PP, PE, by modifying the surface of filler particles. The content of fillers can therefore be increased, saving the cost of polymer, while maintaining the mechanical property.
-
Tytan CX400 is titanium chelate of alkanolamine titanate complex and developed as a rheology modifier for use in emulsion paints. Tytan CX400 reacts with colloid stabilized binders to impart thixotropic structure. Tytan CX400 is suitable for VOC free paint.
-
Tytan CX200 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX200 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX200 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Tytan CX200 has improved compatibility with a broad range of paint formulations but it is still recommended that use of Tytan CX200 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
Tytan CX100 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX100 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX100 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Use of Tytan CX100 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
TYTAN Titanate Coupling & Dispersing Agents are molecular bridges at the interface between inorganic fillers (such as CaCO3, BaSO4, graphite, talc, carbon black, silica and metal oxides) and polymers (such as PP, PE, PVC, PBT, PET, ABS and rubbers). When incorporated into polymers, the coupling agent could improve filler loading, pigment dispersion, processability and composite mechanical properties to achieve the specification desired. As a comparison, silane coupling agents only reacts with hydroxyl groups on the filler surface via water condensation of silanol-siloxane process, therefore it is suitable for glass, alumina hydroxide, magnesium hydroxide etc. The advantage of titanate coupling agents is that they not only react with hydroxyls, but also the free protons on the inorganic interface, which results in the formation of organic monomolecular layers on the inorganic surface forming the bonding for polymers. Dosage is up to the property required and the filler type used is dependent on its surface area, the larger the surface area, the more Tytan titanate coupling & dispersing agent are needed. As a guide, the general dosage range is 0.2% ~ 2.0% by weight of filler.
-
Tytan AQZ30 is a Zirconium triethanolamine complex that readily hydrolyses in water to produce a hydroxyl zirconium chelate. This will readily crosslink with –OH and –COOH groups in solvent and aqueous systems to form strong gels and has the potential to act as an adhesion promoter. AQZ30 is an effective rheology modifier for functionalised guar derivatives for secondary and tertiary recovery of oil and gas wells. It has the ability to crosslink in both water-borne and solvent-borne coatings and provides adhesion in water-borne and solvent-borne printing inks. Compared with titanium based alkanolamines, AQZ30 offers prevention against yellowing of the polymer in use.
-
Tytan PBT has polymer structure with chemical formula as TixO y(OR) 4x-y. Tytan PBT is largely used in formulating heat and corrosion resistant paints. Tytan PBT can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint contains Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dried, it can stand up to 600 oC.
-
Tetraethyl titanate or ET is a titanium alkoxide. Tytan ET is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan AQ33 is used as an esterification and transesterification catalyst for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT when water content is higher. Tytan AQ33 can also be used as adhesion promoter or cross linking agent for water based coating on various surface. Suggested dosage is 0.1 ~ 1% as catalyst and 0.5 ~ 5% as cross linking agent.
-
An amine-free, water-soluble, multi-metal corrosion inhibitor recommended to protect a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. Applications include, alkaline metal cleaners, synthetic coolants & cutting fluids, water based lubricants, water based paints & coatings with many more applications.
-
A water-soluble, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25% - 0.5%). It is recommended to protect a variety of metals including aluminum, copper, brass, magnesium, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems.
-
A very low foaming, water soluble corrosion inhibitor primarily used for the prevention of rust on steel and cast iron. It also provides limited short term corrosion inhibition on brass, copper and other non-ferrous metals. It is not recommended for use on aluminum.
-
A low foaming, mixed amine carboxylate. It is recommended for use as a low foaming, corrosion inhibitor for ferrous and non-ferrous metals in aqueous systems at pH >7.
-
A non-foaming amine borate suggested for use as a corrosion inhibitor for ferrous and non-ferrous metals in aqueous solutions.
