-
Tytan CX200 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX200 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX200 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Tytan CX200 has improved compatibility with a broad range of paint formulations but it is still recommended that use of Tytan CX200 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
Tytan CX100 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX100 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX100 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Use of Tytan CX100 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
TYTAN Titanate Coupling & Dispersing Agents are molecular bridges at the interface between inorganic fillers (such as CaCO3, BaSO4, graphite, talc, carbon black, silica and metal oxides) and polymers (such as PP, PE, PVC, PBT, PET, ABS and rubbers). When incorporated into polymers, the coupling agent could improve filler loading, pigment dispersion, processability and composite mechanical properties to achieve the specification desired. As a comparison, silane coupling agents only reacts with hydroxyl groups on the filler surface via water condensation of silanol-siloxane process, therefore it is suitable for glass, alumina hydroxide, magnesium hydroxide etc. The advantage of titanate coupling agents is that they not only react with hydroxyls, but also the free protons on the inorganic interface, which results in the formation of organic monomolecular layers on the inorganic surface forming the bonding for polymers. Dosage is up to the property required and the filler type used is dependent on its surface area, the larger the surface area, the more Tytan titanate coupling & dispersing agent are needed. As a guide, the general dosage range is 0.2% ~ 2.0% by weight of filler.
-
Tytan AQZ30 is a Zirconium triethanolamine complex that readily hydrolyses in water to produce a hydroxyl zirconium chelate. This will readily crosslink with –OH and –COOH groups in solvent and aqueous systems to form strong gels and has the potential to act as an adhesion promoter. AQZ30 is an effective rheology modifier for functionalised guar derivatives for secondary and tertiary recovery of oil and gas wells. It has the ability to crosslink in both water-borne and solvent-borne coatings and provides adhesion in water-borne and solvent-borne printing inks. Compared with titanium based alkanolamines, AQZ30 offers prevention against yellowing of the polymer in use.
-
Tytan PBT has polymer structure with chemical formula as TixO y(OR) 4x-y. Tytan PBT is largely used in formulating heat and corrosion resistant paints. Tytan PBT can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint contains Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dried, it can stand up to 600 oC.
-
Tetraethyl titanate or ET is a titanium alkoxide. Tytan ET is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan AQ33 is used as an esterification and transesterification catalyst for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT when water content is higher. Tytan AQ33 can also be used as adhesion promoter or cross linking agent for water based coating on various surface. Suggested dosage is 0.1 ~ 1% as catalyst and 0.5 ~ 5% as cross linking agent.
-
An amine-free, water-soluble, multi-metal corrosion inhibitor recommended to protect a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. Applications include, alkaline metal cleaners, synthetic coolants & cutting fluids, water based lubricants, water based paints & coatings with many more applications.
-
A water-soluble, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25% - 0.5%). It is recommended to protect a variety of metals including aluminum, copper, brass, magnesium, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems.
-
A very low foaming, water soluble corrosion inhibitor primarily used for the prevention of rust on steel and cast iron. It also provides limited short term corrosion inhibition on brass, copper and other non-ferrous metals. It is not recommended for use on aluminum.
-
A non-foaming amine borate suggested for use as a corrosion inhibitor for ferrous and non-ferrous metals in aqueous solutions.
-
DeCORE APCI-95MOD is a very low foaming, water soluble anionic corrosion inhibitor used for the prevention of rust on a variety of metal surfaces. It is suggested for use as an all purpose corrosion inhibitor for copper, brass, magnesium, bronze, galvanized steel, cast iron and other ferrous and non-ferrous metals. APPLICATIONS • Synthetic coolants and cutting fluids • Industrial cooling towers • Water based lubricants • Alkaline metal cleaners • Aerosol formulations • Low foam alkaline cleaners • Radiator fluid additive • Treating baths for copper and copper alloys • Water based paints and coatings
-
A modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous alkaline systems. It also functions as a corrosion inhibitor for steel & aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
A liquid, anhydrous modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous and powdered alkaline systems. It also functions as a corrosion inhibitor for aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
A low foaming, mixed amine carboxylate. It is recommended for use as a low foaming, corrosion inhibitor for ferrous and non-ferrous metals in aqueous systems at pH >7.
-
A 45% active sodium alkanoate in water. It is a highly effective, multifunctional, low foam hydrotrope recommended for use in cleaners at pH above 7. Chlorine stable and also exhibits wetting and corrosion inhibition properties. Soluble in water, alcohols and glycols and insoluble or dispersible in oils and solvents.
-
A DEA-free, biodegradable emulsifier for D’Limonene. Micro-emulsion concentrates can easily be made, which remain clear upon dilution. Soluble in water, alcohols, glycols, chlorinated, terpene and aliphatic solvents. It is insoluble or dispersible in aromatic solvents and oils.
-
A concentrate for use as an economical D’Limonene emulsifier. D’Limonene micro-emulsion concentrates can be made that ‘bloom’ upon dilution. Soluble in water, alcohols, chlorinated solvents, terpene solvents, aromatic solvents and glycols. It is insoluble or dispersible in aliphatic solvents and oils.
-
A concentrated emulsifier designed to produce D’Limonene micro-emulsions, which remain clear upon dilution. Emulsion stability and clarity are improved as compared to DeMULS DLN-532CE. Soluble in water, alcohols, chlorinated solvents, terpene solvents, terpene oils, aromatic solvents, and glycols. It is insoluble or dispersible in aliphatic solvents & other oils.
-
A unique, very low foaming, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including wetting and dispersing properties. Dispersable in water and oils.
-
A 100% active mixed alcohol ethoxylate suggested for use in solid or block formulations. Soluble in water, alcohols and glycols. It is insoluble in most solvents and oils.
-
A unique, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including excellent wetting and dispersing properties combined with very low foam.
-
A readily biodegradable modified amine oxide used to produce clear, stable, colorless sodium hypochlorite or hydrogen peroxide gels. Soluble in water, alcohol and glycols. Insoluble in most solvents and oils.
-
A unique, modified alkoxylated alcohol delivering multifunctional characteristics including excellent dynamic surface tension reduction, wetting and very low foam. Properties are similar to DeIONIC LF-60MOD with the additional feature of being alkylphenol ethoxylate free.
