-
A 100% active mixed alcohol ethoxylate suggested for use in solid or block formulations. Soluble in water, alcohols and glycols. It is insoluble in most solvents and oils.
-
A unique, very low foaming, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including wetting and dispersing properties. Dispersable in water and oils.
-
A concentrated emulsifier designed to produce D’Limonene micro-emulsions, which remain clear upon dilution. Emulsion stability and clarity are improved as compared to DeMULS DLN-532CE. Soluble in water, alcohols, chlorinated solvents, terpene solvents, terpene oils, aromatic solvents, and glycols. It is insoluble or dispersible in aliphatic solvents & other oils.
-
A concentrate for use as an economical D’Limonene emulsifier. D’Limonene micro-emulsion concentrates can be made that ‘bloom’ upon dilution. Soluble in water, alcohols, chlorinated solvents, terpene solvents, aromatic solvents and glycols. It is insoluble or dispersible in aliphatic solvents and oils.
-
A DEA-free, biodegradable emulsifier for D’Limonene. Micro-emulsion concentrates can easily be made, which remain clear upon dilution. Soluble in water, alcohols, glycols, chlorinated, terpene and aliphatic solvents. It is insoluble or dispersible in aromatic solvents and oils.
-
A 45% active sodium alkanoate in water. It is a highly effective, multifunctional, low foam hydrotrope recommended for use in cleaners at pH above 7. Chlorine stable and also exhibits wetting and corrosion inhibition properties. Soluble in water, alcohols and glycols and insoluble or dispersible in oils and solvents.
-
A liquid, anhydrous modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous and powdered alkaline systems. It also functions as a corrosion inhibitor for aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
A modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous alkaline systems. It also functions as a corrosion inhibitor for steel & aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
DeCORE APCI-95MOD is a very low foaming, water soluble anionic corrosion inhibitor used for the prevention of rust on a variety of metal surfaces. It is suggested for use as an all purpose corrosion inhibitor for copper, brass, magnesium, bronze, galvanized steel, cast iron and other ferrous and non-ferrous metals. APPLICATIONS • Synthetic coolants and cutting fluids • Industrial cooling towers • Water based lubricants • Alkaline metal cleaners • Aerosol formulations • Low foam alkaline cleaners • Radiator fluid additive • Treating baths for copper and copper alloys • Water based paints and coatings
-
A non-foaming amine borate suggested for use as a corrosion inhibitor for ferrous and non-ferrous metals in aqueous solutions.
-
A low foaming, mixed amine carboxylate. It is recommended for use as a low foaming, corrosion inhibitor for ferrous and non-ferrous metals in aqueous systems at pH >7.
-
A very low foaming, water soluble corrosion inhibitor primarily used for the prevention of rust on steel and cast iron. It also provides limited short term corrosion inhibition on brass, copper and other non-ferrous metals. It is not recommended for use on aluminum.
-
A water-soluble, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25% - 0.5%). It is recommended to protect a variety of metals including aluminum, copper, brass, magnesium, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems.
-
An amine-free, water-soluble, multi-metal corrosion inhibitor recommended to protect a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. Applications include, alkaline metal cleaners, synthetic coolants & cutting fluids, water based lubricants, water based paints & coatings with many more applications.
-
Tytan AQ33 is used as an esterification and transesterification catalyst for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT when water content is higher. Tytan AQ33 can also be used as adhesion promoter or cross linking agent for water based coating on various surface. Suggested dosage is 0.1 ~ 1% as catalyst and 0.5 ~ 5% as cross linking agent.
-
Tetraethyl titanate or ET is a titanium alkoxide. Tytan ET is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan PBT has polymer structure with chemical formula as TixO y(OR) 4x-y. Tytan PBT is largely used in formulating heat and corrosion resistant paints. Tytan PBT can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint contains Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dried, it can stand up to 600 oC.
-
Tytan AQZ30 is a Zirconium triethanolamine complex that readily hydrolyses in water to produce a hydroxyl zirconium chelate. This will readily crosslink with –OH and –COOH groups in solvent and aqueous systems to form strong gels and has the potential to act as an adhesion promoter. AQZ30 is an effective rheology modifier for functionalised guar derivatives for secondary and tertiary recovery of oil and gas wells. It has the ability to crosslink in both water-borne and solvent-borne coatings and provides adhesion in water-borne and solvent-borne printing inks. Compared with titanium based alkanolamines, AQZ30 offers prevention against yellowing of the polymer in use.
-
Tytan CX100 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX100 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX100 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Use of Tytan CX100 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
Organically modified polysiloxane slip and leveling for water-based systems. 50% solution of 3580 in DMP.
-
Organically modified polysiloxane slip and leveling agent for aqueous systems. Very strong surface tension reduction and good compatibility properties. Very fast substrate wetting and anti-crater performance in all water based systems.
-
Modified polyacrylic polymeric dispersant for water-based systems. Improved version of 4560 that gives better viscosity depression on pigments, especially carbon blacks and transparent iron oxides. More effective dispersant for colorants within water-based systems.
-
Modified polyacrylic polymeric dispersant for water-based systems in all kinds of pigments within industrial coatings. Can be used to formulate resin-free pigment concentrates.
-
Fatty acid modified polyester. Improved hydrophilicity over 6225. Yields better color strength, viscosity reduction, pigment stability and better color acceptance in water and solvent-based paints.
-
Fatty acid modified polyester emulsifier. It is recommended to improve color acceptance of colorants in base paints. The use in colored NC can improve the gloss. 96% active.
-
Modified polysiloxane emulsion slip and leveling agent for water-based systems. (APE free) Good water resistance and slip performance. No foam stabilizing effect. High dosages provide water repellent effect.
-
Organically modified polysiloxane for aqueous systems. Short chain polysiloxane with no influence on intercoat adhesion in multi-coat systems. Very strong anti-cratering. Must be used in combination with a suitable defoamer. Recommended for electro deposition coatings and all other water-based systems.
-
Modified polyacrylic polymeric dispersant for water-based systems within architectural paints & industrial coatings. can be used to formulate resin-free pigment concentrates.
-
Modified polyacrylic polymeric dispersant for water-based systems. Wide compatibility in decorative and industrial coatings for all kinds of pigments. Completely water-soluble and can be neutralized to improve viscosity reduction performance.
-
High molecular weight dispersant that is pH independent for all pigments. Can be used in resin free concentrates. Also used for color acceptance in let down media.
-
Special bloc-copolymer dispersant for water-based systems. Designed with superior water-resistance. Designed for use in both architectural paints and general industrial coatings as well as water-based colorants. Yields lower viscosity, stable dispersions with higher color strength and good in-can stability.
-
Non-ionic acetylenic diol based surfactant dispersing agent for water-based systems. A multi-functional additive, helps wet out difficult or contaminated substrates, lowers the surface tension of the system, improves pigment grind efficiency and prevents surface defects such as fisheyes, edge crawl and craters. Acts as a defoamer and due to its hydrophobic nature, reduces water sensitivity of the final system.
-
Solution of a sodium salt of an acrylic polymeric dispersing and wetting agent for water-based systems. Especially suitable for dispersion of inorganic pigments and fillers. Improved storage stability of both pigment dispersion and formulated paint. No adverse reaction to high temperatures or pH drift.
-
Special block-copolymer solvent-free dispersing agent for preparation of solvent and water-based pigment concentrates. Suitable for all type of pigments. Compatible with many let-down systems.
-
Fatty acid modified polyester improved pigment stability over 6220. Color acceptance aid & dispersant for all kinds of pigments for water & solvent-based systems. Can be used to formulate resin free universal colorants. 96% active.
