-
A readily biodegradable modified amine oxide used to produce clear, stable, colorless sodium hypochlorite or hydrogen peroxide gels. Soluble in water, alcohol and glycols. Insoluble in most solvents and oils.
-
A moderate foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~61ºC. It has the highest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols and glycols. It is water soluble below its cloud point, dispersible above its cloud point (56° -63°C), and insoluble or dispersible in oils and solvents.
-
A moderate foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~40ºC. It exhibits a mid-range cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols and glycols. It is water soluble below its cloud point, dispersible above its cloud point (38° - 42°C), and insoluble in oils.
-
A low foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~25ºC. It has the second lowest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols, glycols, and solvents. It is water soluble below its cloud point and dispersible above its cloud point (23° -27°C). It is insoluble in oils.
-
A very low foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~15ºC. It has the lowest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols, glycols and solvents. It is water soluble below its cloud point, dispersible above its cloud point (13° -18°C), and insoluble in oils.
-
A unique, modified alkoxylated alcohol delivering multifunctional characteristics including excellent dynamic surface tension reduction, wetting and very low foam. Properties are similar to DeIONIC LF-60MOD with the additional feature of being alkylphenol ethoxylate free.
-
A unique, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including excellent wetting and dispersing properties combined with very low foam.
-
A 100% active mixed alcohol ethoxylate suggested for use in solid or block formulations. Soluble in water, alcohols and glycols. It is insoluble in most solvents and oils.
-
A unique, very low foaming, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including wetting and dispersing properties. Dispersable in water and oils.
-
A concentrated emulsifier designed to produce D’Limonene micro-emulsions, which remain clear upon dilution. Emulsion stability and clarity are improved as compared to DeMULS DLN-532CE. Soluble in water, alcohols, chlorinated solvents, terpene solvents, terpene oils, aromatic solvents, and glycols. It is insoluble or dispersible in aliphatic solvents & other oils.
-
A concentrate for use as an economical D’Limonene emulsifier. D’Limonene micro-emulsion concentrates can be made that ‘bloom’ upon dilution. Soluble in water, alcohols, chlorinated solvents, terpene solvents, aromatic solvents and glycols. It is insoluble or dispersible in aliphatic solvents and oils.
-
A DEA-free, biodegradable emulsifier for D’Limonene. Micro-emulsion concentrates can easily be made, which remain clear upon dilution. Soluble in water, alcohols, glycols, chlorinated, terpene and aliphatic solvents. It is insoluble or dispersible in aromatic solvents and oils.
-
A 45% active sodium alkanoate in water. It is a highly effective, multifunctional, low foam hydrotrope recommended for use in cleaners at pH above 7. Chlorine stable and also exhibits wetting and corrosion inhibition properties. Soluble in water, alcohols and glycols and insoluble or dispersible in oils and solvents.
-
A liquid, anhydrous modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous and powdered alkaline systems. It also functions as a corrosion inhibitor for aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
A modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous alkaline systems. It also functions as a corrosion inhibitor for steel & aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
DeCORE APCI-95MOD is a very low foaming, water soluble anionic corrosion inhibitor used for the prevention of rust on a variety of metal surfaces. It is suggested for use as an all purpose corrosion inhibitor for copper, brass, magnesium, bronze, galvanized steel, cast iron and other ferrous and non-ferrous metals. APPLICATIONS • Synthetic coolants and cutting fluids • Industrial cooling towers • Water based lubricants • Alkaline metal cleaners • Aerosol formulations • Low foam alkaline cleaners • Radiator fluid additive • Treating baths for copper and copper alloys • Water based paints and coatings
-
A non-foaming amine borate suggested for use as a corrosion inhibitor for ferrous and non-ferrous metals in aqueous solutions.
-
A low foaming, mixed amine carboxylate. It is recommended for use as a low foaming, corrosion inhibitor for ferrous and non-ferrous metals in aqueous systems at pH >7.
-
A very low foaming, water soluble corrosion inhibitor primarily used for the prevention of rust on steel and cast iron. It also provides limited short term corrosion inhibition on brass, copper and other non-ferrous metals. It is not recommended for use on aluminum.
-
A water-soluble, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25% - 0.5%). It is recommended to protect a variety of metals including aluminum, copper, brass, magnesium, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems.
-
An amine-free, water-soluble, multi-metal corrosion inhibitor recommended to protect a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. Applications include, alkaline metal cleaners, synthetic coolants & cutting fluids, water based lubricants, water based paints & coatings with many more applications.
-
Tytan AQ33 is used as an esterification and transesterification catalyst for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT when water content is higher. Tytan AQ33 can also be used as adhesion promoter or cross linking agent for water based coating on various surface. Suggested dosage is 0.1 ~ 1% as catalyst and 0.5 ~ 5% as cross linking agent.
-
Tetraethyl titanate or ET is a titanium alkoxide. Tytan ET is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan PBT has polymer structure with chemical formula as TixO y(OR) 4x-y. Tytan PBT is largely used in formulating heat and corrosion resistant paints. Tytan PBT can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint contains Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dried, it can stand up to 600 oC.
