-
Tytan AP110 is modified from Tytan AP100, which is aiming for better compatibility with various ink formulations. Tytan AP110 is proved offering the same adhesion performance as Tytan AP100, in addition, preventing the viscosity changed during printing process.
-
Tytan S6 is a titanium ethylacetoacetates used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. Tytan S6 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.
-
Tytan TET is titanium chelate of triethanolamine and isopropyl alcohol complexes with chemical formula as (TEA)2 – Ti – (OiPr) 2. Tytan TET is water soluble titanate and can be used in a variety of applications e.g. as cross-linking agent in aqueous and non-aqueous paint, wire enamel and adhesion promoter in polyurethane system.
-
Tytan TNBT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TNBT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TNBT is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TNBT can also be used as a moisture scavenger to prolong shelf life of moisture sensitive high viscosity products. Tytan TNBT can only be used as an additive to solvent based products.
-
Tetraethyl titanate or ET is a titanium alkoxide. Tytan ET is used in a variety of industrial applications e.g. as an esterification and transesterification catalyst, as an olefin polymerisation catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints.
-
Tytan AQ33 is used as an esterification and transesterification catalyst for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT when water content is higher. Tytan AQ33 can also be used as adhesion promoter or cross linking agent for water based coating on various surface. Suggested dosage is 0.1 ~ 1% as catalyst and 0.5 ~ 5% as cross linking agent.
-
Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. Tytan TNBZ is mainly used as catalyst for esterification, trans-esterification and olefin polymerization (Ziegler-Natta). Tytan TNBZ is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings.
-
Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. Tytan TNBZ is mainly used as catalyst for esterification, trans-esterification and olefin polymerization (Ziegler-Natta). Tytan TNBZ is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings.
-
Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-improvement properties which makes it also very suitable to strongly improve performance properties of industrial coatings on difficult modern polymeric substrates, glass and some metals. Tytan TAA can only be used in solvent based inks and coatings.
-
Tytan AP100 is a Titanium Phosphate Complex of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan AP100 is mainly designed to strongly increase adhesion of solvent based inks to a variety of plastics used for food packaging or other purposes. Tytan AP100 is transparent and therefore most suitable for modification of ink for very clear-colour and high-gloss printing. Tytan AP100 is low odour and applies to the most stringent contemporary legislation on registration of the ECB. Tytan AP100 can only be used in solvent based inks.
-
Tytan TIPT is a very reactive primary titanate that will hydrolyse immediately in contact with moisture. Tytan TIPT is mainly used as catalyst for esterification, trans-esterification and olefin polymerization. Tytan TIPT can also be used selectively as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. Tytan TIPT is most suitable for use in the glass and glass fibre manufacturing. Tytan TIPT can only be used as an additive to solvent based products.
-
An amine-free, water-soluble, multi-metal corrosion inhibitor recommended to protect a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. Applications include, alkaline metal cleaners, synthetic coolants & cutting fluids, water based lubricants, water based paints & coatings with many more applications.
-
A water-soluble, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25% - 0.5%). It is recommended to protect a variety of metals including aluminum, copper, brass, magnesium, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems.
-
A very low foaming, water soluble corrosion inhibitor primarily used for the prevention of rust on steel and cast iron. It also provides limited short term corrosion inhibition on brass, copper and other non-ferrous metals. It is not recommended for use on aluminum.
-
A low foaming, mixed amine carboxylate. It is recommended for use as a low foaming, corrosion inhibitor for ferrous and non-ferrous metals in aqueous systems at pH >7.
-
A non-foaming amine borate suggested for use as a corrosion inhibitor for ferrous and non-ferrous metals in aqueous solutions.
-
DeCORE APCI-95MOD is a very low foaming, water soluble anionic corrosion inhibitor used for the prevention of rust on a variety of metal surfaces. It is suggested for use as an all purpose corrosion inhibitor for copper, brass, magnesium, bronze, galvanized steel, cast iron and other ferrous and non-ferrous metals. APPLICATIONS • Synthetic coolants and cutting fluids • Industrial cooling towers • Water based lubricants • Alkaline metal cleaners • Aerosol formulations • Low foam alkaline cleaners • Radiator fluid additive • Treating baths for copper and copper alloys • Water based paints and coatings
-
A modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous alkaline systems. It also functions as a corrosion inhibitor for steel & aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
A liquid, anhydrous modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous and powdered alkaline systems. It also functions as a corrosion inhibitor for aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
A 45% active sodium alkanoate in water. It is a highly effective, multifunctional, low foam hydrotrope recommended for use in cleaners at pH above 7. Chlorine stable and also exhibits wetting and corrosion inhibition properties. Soluble in water, alcohols and glycols and insoluble or dispersible in oils and solvents.
-
A DEA-free, biodegradable emulsifier for D’Limonene. Micro-emulsion concentrates can easily be made, which remain clear upon dilution. Soluble in water, alcohols, glycols, chlorinated, terpene and aliphatic solvents. It is insoluble or dispersible in aromatic solvents and oils.
-
A concentrate for use as an economical D’Limonene emulsifier. D’Limonene micro-emulsion concentrates can be made that ‘bloom’ upon dilution. Soluble in water, alcohols, chlorinated solvents, terpene solvents, aromatic solvents and glycols. It is insoluble or dispersible in aliphatic solvents and oils.
-
A concentrated emulsifier designed to produce D’Limonene micro-emulsions, which remain clear upon dilution. Emulsion stability and clarity are improved as compared to DeMULS DLN-532CE. Soluble in water, alcohols, chlorinated solvents, terpene solvents, terpene oils, aromatic solvents, and glycols. It is insoluble or dispersible in aliphatic solvents & other oils.
-
A unique, very low foaming, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including wetting and dispersing properties. Dispersable in water and oils.
-
A 100% active mixed alcohol ethoxylate suggested for use in solid or block formulations. Soluble in water, alcohols and glycols. It is insoluble in most solvents and oils.
-
A unique, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including excellent wetting and dispersing properties combined with very low foam.
-
A unique, modified alkoxylated alcohol delivering multifunctional characteristics including excellent dynamic surface tension reduction, wetting and very low foam. Properties are similar to DeIONIC LF-60MOD with the additional feature of being alkylphenol ethoxylate free.
-
A very low foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~15ºC. It has the lowest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols, glycols and solvents. It is water soluble below its cloud point, dispersible above its cloud point (13° -18°C), and insoluble in oils.
-
A low foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~25ºC. It has the second lowest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols, glycols, and solvents. It is water soluble below its cloud point and dispersible above its cloud point (23° -27°C). It is insoluble in oils.
-
A moderate foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~40ºC. It exhibits a mid-range cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols and glycols. It is water soluble below its cloud point, dispersible above its cloud point (38° - 42°C), and insoluble in oils.
-
A moderate foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~61ºC. It has the highest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols and glycols. It is water soluble below its cloud point, dispersible above its cloud point (56° -63°C), and insoluble or dispersible in oils and solvents.
-
A readily biodegradable modified amine oxide used to produce clear, stable, colorless sodium hypochlorite or hydrogen peroxide gels. Soluble in water, alcohol and glycols. Insoluble in most solvents and oils.
-
A readily biodegradable emulsifier for dibasic esters, kerosene and other solvents. Dispersible or soluble in water, alcohols, aliphatic, aromatic and chlorinated solvents and glycols. It is dispersible or insoluble in oils.
-
A cost effective, biodegradable emulsifier for soy, canola and rapeseed methyl esters. Soluble in water, alcohols, aromatic and chlorinated solvents. It is dispersible in glycols and oils. It is insoluble in aliphatic solvents below a concentration of 25% by weight.
-
An aliphatic phosphate ester in the acid form, based on an ethoxylated alcohol. Dispersible in water & oils. Soluble in most polar and aromatic solvents.
