-
Nonreactive resin modifier with a viscosity of 30-115 cPs. Color gardner of ≤ 14.
-
Hydrocarbon resin modifier with a viscosity of 450-750 cPs. A color gardner of ≤ 4.
-
Epoxy reactive diluent based on renewable CNSL (bio based) with a viscosity of 40-70 cPs. Color Gardner of 9. This epoxy diluent will contribute lower viscosity, increase hydrophobicity and flexibility. See UL 513 for lower color and lower viscosity. Similar properties to C 12-C 14 glycidyl ether epoxy diluents. Slightly less Tg reduction vs GE epoxy diluents. Lite 513 E has lower total chloride and halogen content.
-
A solvent-free phenalkamine with a viscosity of 1,100 cPS. Color gardner 14. Gel time in 22 mins.
-
A solvent-free phenalkamine with a viscosity of 900 cPS. Color gardner 17. Gel time in 40 mins.
-
Cardolite NT-1300 is an tertiary amine catalyst. Offset to Ancamine k54.
-
Cardolite NT-1515is a solvent free, high viscosity polyamide designed for use with solid or liquid epoxy resins. NT-1515 epoxy systems can be used in maintenance coatings, primers and enamel paint formulations because of their excellent corrosion resistance and adhesion properties. This product is also useful in adhesive applications.
-
Cardolite NT-1515X70 is a xylene solution of a high viscosity polyamide, designed for use with solid or liquid epoxy resins. NT-1515X70 epoxy resin systems are used in maintenance coatings and primers because of their excellent corrosion resistance and adhesion properties. This product is also useful in adhesive applications.
-
Cardolite NT-1542 is a solvent free, medium viscosity polyamide curing agent suitable for high solids epoxy coatings and adhesive applications.
-
Cardolite NT-1544 is a solvent free, medium low viscosity polyamide curing agent suitable for high solids epoxy coatings and adhesive applications.
-
Cardolite NT-3000 is an aliphatic monoglycidyl ether containing alkyl chains,which are predominately C12 and C14 in length.
-
A solvent-free phenalkamine with a viscosity of 700 cPS. Color gardner 13. Gel time in 25 mins.
-
Cardolite NX-202x products are low viscosity multipurpose resin modifiers. The long hydrophobic aliphatic side chain of the cardanol molecule gives these products a very low viscosity and provides excellent early water resistance and corrosion protection. By using NX-202x products as epoxy diluents and accelerators, high solids or solvent free formulations can be achieved with enhanced workability and faster cure without sacrificing other performance properties. In addition, the flexibility of the side chain helps increase impact resistance of the final coating. Different Grades Available. NX-2023 can replace nonyl phenol. NX 2023 is non toxic,exhibits higher visc reduction, does not reduce gel time like NP, and shows improved water resistance. These products are a good alternative to synthetic phenolic diluents that have unfavorable labeling.
-
Nonreactive resin modifier with a viscosity of ≤ 60 cPs. Color gardner of ≤ 2.
-
A solvent-free phenalkamine with a viscosity of 1,080 cPS. Color gardner 11. Gel time in 18 mins.
-
Cardolite NX-8101 is an epoxy curing agent based on latest modified CNSL waterborne technology. This product is supplied in water and recommended for epoxy primers and self-levelers for concrete floors.
-
Cardolite NX-9005 is a unique polyol suitable for polyurethane coatings and adhesives. This product has well balanced mechanical properties, high tensile strength and excellent elongation. Non-CNSL Branched Polyol - good UV resistance. Offset Desmophen 1150 and Sovermol 805/1080
-
Suitable for a variety of applications:
- CASE and foam markets
- one and two component systems
- ambient, moisture and heat cured systems n building block for prepolymers
- Excellent water and moisture resistance
- Excellent acid and alkali resistance
- Very good hydrolytic stability
- Fire and thermal resistance
- Can be tailored for different properties
- Available in low to high functionalities
-
Phenalkamine curative used in fast cure, low temperature systems. The CA has excellent corrosion resistance and good color.
-
Cardolite Ultra LITE 2009H is a very light color and low viscosity phenalkamine curing agent suitable for epoxy coating applications protecting concrete and metal substrates. Ultra LITE 2009H provides faster hardness development than Ultra LITE 2009 in addition to excellent cure and film properties. This product is designed primarily for floor topcoats and self-levelers due to its good mechanical properties, and gloss and color retention.
-
Cardolite Ultra LITE 2009SF is a very light color and undiluted phenalkamine curing agent suitable for epoxy coatings applications.
-
Nonreactive resin modifier with a viscosity of 40-100 cPs. Color gardner of 1.
-
A reactive epoxy diluent based on CNSL (biobased). This renewable diluent exhibits very low color, visc reductions, hydrophobicity and flexibility. Viscosity reduction similar to glycidyl ethers (C12-C14 types) and faster cure times at room temp and low temperatures.
-
Cardolite Ultra LITE 2020is a low viscosity, solvent-free multipurpose resin modifier designed for use in coatings, adhesives, and other applications. The long hydrophobic aliphatic side chain of the cardanol molecule gives this product a very low viscosity and provides excellent early water resistance and corrosion protection. Used as an epoxy diluent, high viscosity solvent or solvent free formulations can achieve enhanced workability and higher solids without sacrificing other performance properties using this product. This product also has the ability to react and be used in alkyds, urethanes, and acrylics. Cardolite UltraLITE 2020 was designed as a formulation tool to reduce VOC levels and viscosity of coating and adhesive systems. Although higher in viscosity than some other modifiers, the structure of this product gives excellent dilution efficiency to help rapidly reduce viscosity for improved pigment wetting, flexibility, and general application properties. Physical properties such as water resistance, corrosion protection, color stability, chemical resistance, and gloss are not significantly compromised with the addition of Ultra LITE 2020, and the product can be added in on either component side of multi-part formulations. ADVANTAGES • Lowers viscosity while maintaining performance • Preserves chemical and water resistance • Good dilution effect • Adds flexibility • Reduces high shear • Compatible and usable in a variety of coating chemistries•Improves pigment wetting • Reacts with urethanes, alkyds, and acrylic resin • Low volatility and high flash point • Non-toxic • Based from natural, renewable,non-food raw material feedstock
-
A room temperature curing agent designed to exhibit light color, good chemical resistance and low blush films when reacted with 190EEW bisphenol A epoxy resin. The low viscosity of this material makes it suitable for many high solids applications including self leveling flooring, floor toppings and maintenance coatings.
-
A room temperature curing agent designed to exhibit light color, good chemical resistance and low blush films when reacted with 190EEW bisphenol A epoxy resin. The low viscosity of this material makes it suitable for many high solids applications including self leveling flooring, floor toppings and maintenance coatings.
-
specific gravity: 1.01-1.04 visc: 250 appearance: white opaque liquid solids: 21-23 %
-
Soft, aliphatic, polyester-based, water-borne polyurethane dispersion. HD-2001was designed for use in textile applications that require a soft hand coupled with abrasion resistance, excellent adhesion and excellent resiliency. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. HD-2001is also suitable for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows HD-2001to be used as a heat-sealable coating. When properly formulated, HD-2001can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics. CHARACTERISTICS:
- Superior flexibility
- Soft, tough, flexible film
- Excellent UV resistance
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low softening point (265ºF)
-
Co-solvent free, soft, aliphatic, water-borne, polyurethane dispersion. HD-2024 was designed for use as a cost effective urethane for use in coatings or finishes for textile fabrics. This unique urethane dispersion is manufactured at high solids and without the use of solvent. HD-2024 is well suited for use as a strength additive for acrylic polymers. Whether used alone or as a strength additive, HD-2024 provides increased strength, anti-fray, and abrasion resistance properties at an affordable price. CHARACTERISTICS:
- Co-solvent free and high solids
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent UV resistance
- Excellent low temperature flexibility and crack resistance
- Very good abrasion resistance
-
A soft. aliphatic, polyester-based, aqueous polyurethane dispersion. HD-2101 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:
- Outstanding toughness and abrasion resistance
- Excellent water and chemical resistance
- Exceptionally high melting point for a medium soft polymer
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
