-
A DADMAC quaternary ammonium chloride which can form linear homopolymers and copolymers through different reactions. At room temp, DADMAC is stable, does not hydrolyze and is not flammable. It exhibits low toxicity and is not reactive with skin. This product does not contain sodium chloride. DADMAC is diallyl dimethyl ammonium chloride with a CAS # 7398-69-8
-
Suitable for a variety of applications:
- CASE and foam markets
- one and two component systems
- ambient, moisture and heat cured systems n building block for prepolymers
- Excellent water and moisture resistance
- Excellent acid and alkali resistance
- Very good hydrolytic stability
- Fire and thermal resistance
- Can be tailored for different properties
- Available in low to high functionalities
-
Cardolite NX-9005 is a unique polyol suitable for polyurethane coatings and adhesives. This product has well balanced mechanical properties, high tensile strength and excellent elongation. Non-CNSL Branched Polyol - good UV resistance. Offset Desmophen 1150 and Sovermol 805/1080
-
Cardolite NX-202x products are low viscosity multipurpose resin modifiers. The long hydrophobic aliphatic side chain of the cardanol molecule gives these products a very low viscosity and provides excellent early water resistance and corrosion protection. By using NX-202x products as epoxy diluents and accelerators, high solids or solvent free formulations can be achieved with enhanced workability and faster cure without sacrificing other performance properties. In addition, the flexibility of the side chain helps increase impact resistance of the final coating. Different Grades Available. NX-2023 can replace nonyl phenol. NX 2023 is non toxic,exhibits higher visc reduction, does not reduce gel time like NP, and shows improved water resistance. These products are a good alternative to synthetic phenolic diluents that have unfavorable labeling.
-
Cardolite NT-1300 is an tertiary amine catalyst. Offset to Ancamine k54.
-
A soft, aliphatic, polycarbonate-based, polyurethane dispersion. HD-2501 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:
- Maximum hydrolytic stability and oxidation resistance
- Outstanding toughness and abrasion resistance
- Good water and chemical resistance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
Co-solvent free, soft, aliphatic, water-borne, polyurethane dispersion. HD-2024 was designed for use as a cost effective urethane for use in coatings or finishes for textile fabrics. This unique urethane dispersion is manufactured at high solids and without the use of solvent. HD-2024 is well suited for use as a strength additive for acrylic polymers. Whether used alone or as a strength additive, HD-2024 provides increased strength, anti-fray, and abrasion resistance properties at an affordable price. CHARACTERISTICS:
- Co-solvent free and high solids
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent UV resistance
- Excellent low temperature flexibility and crack resistance
- Very good abrasion resistance
-
A low cost, aromatic, polyether-based, aqueous polyurethane dispersion. HD-3011 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. CHARACTERISTICS:
- Medium soft, tough, flexible film
- Unusually dry surface for non-blocking applications
- High melting for thermal stability
- Can be crosslinked with melamines or aziridines for true thermoset character and increased adhesion.
- Excellent hydrolytic stability
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
Ultra-soft, aliphatic, water-borne urethane dispersion. HD-4670 was designed for use in textile applications that require an ultra-soft hand coupled with good strength, abrasion resistance, and excellent resiliency. Due to its overall properties, HD-4670 can be used as a finish or a coating. This versatile urethane is ideally suited for use as an anti-fray finish on textile fabrics that must have an ultra-soft hand. HD-4670 is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance. The extremely low melt temperature also allows HD-4670 to be used as a heat sealable coating. Characteristics:
- Superior flexibility
- Ultra-soft, resilient, flexible, film
- Excellent UV-resistance
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low melting point (240°F)
-
Soft, aliphatic, water-borne, polyurethane dispersion. HD-4638 was designed for use in textile applications as a versatile polyurethane coating. Due to its overall properties, HD-4638 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. HD-4638 is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance Characteristics:
- Superior flexibility
- Soft, tough, flexible, dry film
- Excellent UV resistance
- Very good abrasion resistance
- Superior low temperature flexibility and crack resistance
- High melting point (320°F)
- Good strength properties
-
A soft, matte finish, aliphatic, polyurethane dispersion HD-4626 can be used as a companion dulling agent for basecoat and topcoat formulas on full-grain, corrected, and split leathers. HD-4626 is particularly useful where the break of the leather is a concern. Characteristics:
- Produces a soft, tough, dull film
- Crosslink-able for improved chemical resistance
- Outstanding flexibility
- Good spraying characteristics
- Low tack for good pile down and plate-ability
-
A formulated, aliphatic, polyurethane topcoat which produces a soft, slick feel at low gloss levels. Suggested Uses: Hauthane HD-3830 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
- Soft, slick feel
- Low gloss
- Can be crosslinked to enhance performance
- Forms a film at room temperature
- Low VOC: <50 g/l less water
