- Maximum hydrolytic stability and oxidation resistance Outstanding toughness and abrasion resistance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
-
A soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion from Hauthaway. L-3121 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS
-
A self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use inhigh performance concrete and wood floor coatings. L-3155employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. CHARACTERISTICS:
- One-component, self-crosslinkingpolymer
- High level oftoughness, abrasion-and mar-resistance
- Outstanding water and chemical resistance
- Excellent exterior weathering performance
- Contains n-methyl pyrrolidone(NMP) co-solvent
-
A soft, halogen-free, flame retardant, aliphatic, polyurethane dispersion from Hauthaway. L-3192 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This unique urethane dispersion is manufactured at high solids and without the use of solvent. Low add-on levels of L-3192 will enable synthetic fabrics to pass various FR tests including NFPA-701 and MVSS-302. L-3192 is well suited for use in textile coatings, such as automotive upholstery, that require outstanding strength and flame retardancy. Using L-3192, a coating can be formulated to pass MVSS-302 and maintain required strength properties at a much lower coating weight than conventional coatings. This results in a much softer hand and possible cost savings. CHARACTERISTICS:
- Permanent, non-leaching flame retardancy
- Halogen-free
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent low temperature flex crack resistance
- Contains n-methyl pyrrolidone (NMP)
-
A hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675 from Hauthaway. L-3225 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS
- Self-coalescing at temperatures above 60° F
- Contains no co-solvent
- Produces clear, durable films with low levels of co-solvent (<100 g/l) Excellent non-yellowing properties
- Good water and chemical resistance
-
A partially bio-renewable resource based, NMP-free, soft, aliphatic, water-borne, polyurethane dispersion from Hauthaway. L-3360 was designed for use in textile applications as a versatile polyurethane coating. Due to its overall properties, L-3360 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. L-3360 is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance. CHARACTERISTICS:
- 50% bio-based, renewable resource content
- Superior flexibility
- Produce soft, tough, flexible, dry films
- Good UV resistance
- Very good abrasion resistance
- Superior low temperature flexibility and crack resistance
- Contains n-ethyl pyrrolidone (NEP)
-
A partially, renewable resource-based, hard, aliphatic, polyester-based, aqueous polyurethane dispersion with good chemical and water-resistance properties from Hauthaway. L-3369 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3369 produces glossy films with excellent leveling properties and good stain- and chemical-resistance to a variety of household food and cleaning products. CHARACTERISTICS:
- 42% bio-based, renewable resource content
- Good water and chemical resistance
- Low VOC content (<80 g/l less water)
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
-
A VOC-free, non-ionic, UV-curable polyurethane dispersion. L-3415 is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. CHARACTERISTICS:
- VOC-free, APEO surfactant free
- Non-ionic stabilization
- Excellent chemical and stain resistance
- Superior abrasion resistance
- Fast water release properties
-
An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. L-3466was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. CHARACTERISTICS:
- May be formulated into low surface tension coatings
- Exceptional dye transfer resistance
- Excellent abrasion resistance
- Higher silicone content (~2X) than HD-2602
- Crosslinkable for improved adhesion and performance
- Contains n-ethyl pyrrolidone (NEP) co-solvent
-
A co-solvent free, polycarbonate-based, aliphatic, polyurethane dispersion from Hauthaway. L-3528 was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. L-3528 is ideally suited for exterior applications where film durability and longevity are important considerations. CHARACTERISTICS:
- Excellent exterior weathering durability
- Excellent humidity resistance
- Outstanding toughness and abrasion-resistance
- Co-solvent free, tin-free, APEO-free
-
A soft, co-solvent free, aliphatic, polycarbonate-based polyurethane dispersion from Hauthaway. L-3529 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. It may be blended with L-3528 to increase hardness. CHARACTERISTICS
- Maximum hydrolytic stability and oxidation resistance
- Outstanding toughness and abrasion-resistance
- Good water and chemical resistance
- Can be crosslinked to enhance performance
- Co-solvent free, tin-free, APEO-free.
-
A very soft, co-solvent free, aliphatic, polyester polyurethane dispersion from Hauthaway. L-3614 was designed for use in applications that require an ultra-soft hand coupled with good strength, abrasion resistance, and excellent resiliency. It may be used as a blending resin with the harder L-3615 to impart increased toughness. A balanced composition provides good stability with acrylics and confers superior strength, abrasion resistance and low temperature flexibility properties. CHARACTERISTICS
- Co-solvent free, TEA free, Tin free, APEO free
- Ultra soft, tough, dry film
- Very good abrasion and UV resistance
- Exceptional low temperature flexibility and crack resistance
-
A hard, co-solvent free, aliphatic, polyester polyurethane dispersion from Hauthaway. L-3615 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. It may also be used as a blending resin with the softer L-3614 to impart greater film flexibility. A balanced composition provides good stability with acrylics and confers superior strength, abrasion resistance and low temperature flexibility properties. CHARACTERISTICS
- Co-solvent free, TEA free, Tin free, APEO free
- Medium hard, tough, dry film
- Excellent water and chemical resistance
- Superior abrasion resistance
- Good adhesion to a wide variety of substrates