- High solids (48%), co-solvent free
- Can be crosslinked to improve bond strength and heat-resistance.
- Non-crystalline nature
-
A high solids, anionic, aliphatic, aqueous polyurethane dispersion from Hauthaway. L-2255is an adhesive grade polyurethane suggested for industrial laminating applications. Suitable for bonding plasticized vinyl sheet to itself and to other substrates such as rubber, wood, cardboard and textiles. CHARACTERISTICS:
-
A branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion. L-2357 was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but the use of a multiple component system is neither feasible nor desirable.
- Contains no co-solvent
- Medium hard, tough film
- Polymer branching improves film resistance properties
- Dries to clear, glossy, non-discoloring film
- Dilution and cleanup of wet material with water
-
An aliphatic, co-solvent free, polyether-based, aqueous polyurethane dispersion from Hauthaway. L-2641 was designed for leather basecoat applications where plate-release and print retention are important. CHARACTERISTICS
- Contains no co-solvent
- Produces soft, tough films
- Good water and solvent-resistance for a soft polymer Dries to clear, glossy film
- Dilution and cleanup with water
-
An NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. Suggested Uses: L-2857 was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. Characteristics:
- May be formulated into low surface tension coatings
- Excellent abrasion resistance
- Non-fugitive silicone component
- Crosslinkable for improved adhesion and performance
- Contains dipropylene glycol dimethyl ether co-solvent
-
A hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties from Hauthaway. L-2877 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
- Balance of toughness, abrasion- and mar-resistance
- Outstanding water and chemical resistance
- Excellent exterior weathering performance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
-
A very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. L-2882 was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
- Superior adhesion to PVC
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Contains dipropylene glycol dimethyl ether cosolvent
-
An NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. L-2883 was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X D401. The product, when crosslinked provides tough, chemical-resistant, semi-gloss coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. CHARACTERISTICS:
- Superior chemical resistance
- Excellent exterior weathering durability
- Excellent humidity resistance
- Contains dipropylene glycol dimethyl ether co-solvent
-
An extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. L-2892was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2892 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. CHARACTERISTICS:
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
- Outstanding water and chemical resistance
- Fast early water resistance development
- Can be crosslinked to enhance performance
-
A hard, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, water-borne polyurethane dispersion. L-2897 was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. CHARACTERISTICS:
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Superior adhesion to PVC
-
An NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. SUGGESTED USES:L-2942was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
- Superior adhesion to PVC and treated polypropylene film
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Contains dipropylene glycol dimethyl ether (DMM) co-solven
-
A soft, NMP-free, APEO-free, aliphatic, water-borne, polyurethane dispersion. L-2961 was designed for use in textile applications as a versatile polyurethanecoating. Due to its overall properties, L-2961 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. L-2961is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance. CHARACTERISTICS:
- Forms soft, flexible, dry films
- Excellent UV-resistance
- Good abrasion resistance
- Superior low temperature flexibility and crack resistance
- High melting point (320°F)Contains dipropylene glycol dimethyl ether (DMM) co-solvent
-
A soft, aliphatic, polyester-based, aqueous polyurethane dispersion. L-2969was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-2969 may also be used as a blending resin with harder polyurethane dispersions to impart flexibility without adversely effecting chemical resistance. CHARACTERISTICS:
- Outstanding toughness and abrasion resistance
- Excellent water and chemical resistance
- Exceptionally high melting point for a medium soft polymer
- Can be crosslinked to enhance performance
- Dilution and clean-up with water
- Contains dipropylene glycol dimethyl ether co-solvent
-
Soft, aliphatic, water-borne polyurethane dispersion in a blend of DMM and propylene glycol solvents. L-2985 was designed for use in textile applications that require a soft hand coupled with very good strength, abrasion resistance, excellent adhesion, and excellent resiliency. Due to its overall properties, L-2985 can be used as a finish or a coating. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. L-2985is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows L-2985to be used as a heat seal coating. When properly formulated, L-2985can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics. CHARACTERISTICS:
- NMP-free, APEO-free
- Superior flexibility
- Soft, tough, flexible film
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low melting point (265ºF)
-
An aliphatic, APEO-free, co-solvent free, polyether-based, polyurethane dispersion from Hauthaway. L-3037 was designed for base coats or intermediate coats intended for plating/embossing. Films based on this polymer exhibit excellent print retention properties. CHARACTERISTICS
- Excellent print retention properties
- Contains no co-solvent
- Produces soft, tough films
- Good water and solvent-resistance for a soft polymer Dries to clear, glossy film
-
An NMP-free/APEO-free aliphatic, polyester-based, polyurethane dispersion designed to produce unequaled clarity and gloss from Hauthaway. L-3040 was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. CHARACTERISTICS
- Wet look gloss
- Glass-like clarity
- Adhesion to a wide variety of substrates including wood, plastics, textiles, leather
- Dilution and clean up with ordinary tap water
- Contains dipropylene glycol dimethyl ether co-solvent
-
A soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion from Hauthaway. L-3121 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS
- Maximum hydrolytic stability and oxidation resistance Outstanding toughness and abrasion resistance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
-
A self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use inhigh performance concrete and wood floor coatings. L-3155employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. CHARACTERISTICS:
- One-component, self-crosslinkingpolymer
- High level oftoughness, abrasion-and mar-resistance
- Outstanding water and chemical resistance
- Excellent exterior weathering performance
- Contains n-methyl pyrrolidone(NMP) co-solvent
-
A soft, halogen-free, flame retardant, aliphatic, polyurethane dispersion from Hauthaway. L-3192 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This unique urethane dispersion is manufactured at high solids and without the use of solvent. Low add-on levels of L-3192 will enable synthetic fabrics to pass various FR tests including NFPA-701 and MVSS-302. L-3192 is well suited for use in textile coatings, such as automotive upholstery, that require outstanding strength and flame retardancy. Using L-3192, a coating can be formulated to pass MVSS-302 and maintain required strength properties at a much lower coating weight than conventional coatings. This results in a much softer hand and possible cost savings. CHARACTERISTICS:
- Permanent, non-leaching flame retardancy
- Halogen-free
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent low temperature flex crack resistance
- Contains n-methyl pyrrolidone (NMP)
-
A hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675 from Hauthaway. L-3225 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS
- Self-coalescing at temperatures above 60° F
- Contains no co-solvent
- Produces clear, durable films with low levels of co-solvent (<100 g/l) Excellent non-yellowing properties
- Good water and chemical resistance
-
A partially bio-renewable resource based, NMP-free, soft, aliphatic, water-borne, polyurethane dispersion from Hauthaway. L-3360 was designed for use in textile applications as a versatile polyurethane coating. Due to its overall properties, L-3360 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. L-3360 is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance. CHARACTERISTICS:
- 50% bio-based, renewable resource content
- Superior flexibility
- Produce soft, tough, flexible, dry films
- Good UV resistance
- Very good abrasion resistance
- Superior low temperature flexibility and crack resistance
- Contains n-ethyl pyrrolidone (NEP)