- Superior flexibility
- Soft, tough, flexible film
- Excellent UV resistance
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low softening point (265ºF)
-
Soft, aliphatic, polyester-based, water-borne polyurethane dispersion. HD-2001was designed for use in textile applications that require a soft hand coupled with abrasion resistance, excellent adhesion and excellent resiliency. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. HD-2001is also suitable for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows HD-2001to be used as a heat-sealable coating. When properly formulated, HD-2001can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics. CHARACTERISTICS:
-
specific gravity: 1.01-1.04 visc: 250 appearance: white opaque liquid solids: 21-23 %
-
Precipitated silica Matting agents are high-performance silica developed for gloss reduction in a vast range of applications for a vast range of applications. Absorbent for ink jet paper coatings Can be used in the production of defoamers Over 20 products ranging from 2 microns to 12 microns, with surface areas from 180 to 290 m2/g The line contains a variety of products differing in surface area, particle size, and oil absorption. These matting agents are perfectly suited for wood coatings including floor, furniture and cabinet coatings. They provide the best in efficiency, clarity, and in-can stability, while allowing for good flow and leveling.
- Good choice in both waterborne or solvent systems
- Recommended for for UV Coatings Applications
- Matting agents with high clarity and less impact on viscosity
- Matting agents for Coil Coatings Applications
- Matting agents for Low VOC Coatings Applications
-
Grain size 1-4 mm Dry loose bulk density 220 +/- 30 kg/m3 pH 8-12 Porosity approx 85% Thermal conductivity .07 W/(m-k)
-
Resorcinol Modified Phenol Novolac Epoxy Resin. Highest functionality resorcinol modified phenol novolac epoxy resin. Maximum chemical resistance and Tg.
-
A room temperature curing agent designed to exhibit light color, good chemical resistance and low blush films when reacted with 190EEW bisphenol A epoxy resin. The low viscosity of this material makes it suitable for many high solids applications including self leveling flooring, floor toppings and maintenance coatings.
-
A room temperature curing agent designed to exhibit light color, good chemical resistance and low blush films when reacted with 190EEW bisphenol A epoxy resin. The low viscosity of this material makes it suitable for many high solids applications including self leveling flooring, floor toppings and maintenance coatings.
-
A 45% active sodium alkanoate in water. It is a highly effective, multifunctional, low foam hydrotrope recommended for use in cleaners at pH above 7. Chlorine stable and also exhibits wetting and corrosion inhibition properties. Soluble in water, alcohols and glycols and insoluble or dispersible in oils and solvents.
-
A modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous alkaline systems. It also functions as a corrosion inhibitor for steel & aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.