-
Tytan AQZ30 is a Zirconium triethanolamine complex that readily hydrolyses in water to produce a hydroxyl zirconium chelate. This will readily crosslink with –OH and –COOH groups in solvent and aqueous systems to form strong gels and has the potential to act as an adhesion promoter. AQZ30 is an effective rheology modifier for functionalised guar derivatives for secondary and tertiary recovery of oil and gas wells. It has the ability to crosslink in both water-borne and solvent-borne coatings and provides adhesion in water-borne and solvent-borne printing inks. Compared with titanium based alkanolamines, AQZ30 offers prevention against yellowing of the polymer in use.
-
Tytan AQ33 is used as an esterification and transesterification catalyst for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT when water content is higher. Tytan AQ33 can also be used as adhesion promoter or cross linking agent for water based coating on various surface. Suggested dosage is 0.1 ~ 1% as catalyst and 0.5 ~ 5% as cross linking agent.
-
Tytan AP310 is an ethyl citrate titanium complex that can be used as an adhesion promoter for printing, crosslinker for paints and as a catalyst for esterification. Due to its chelated structure, Tytan AP310 shows delayed reaction at ambient temperature and thus facilitates storage stability of inks.
-
Tytan AP20 is primarily designed to strongly increase adhesion of solvent based inks to a variety of plastics used for food packaging or other purposes, but also pigment distribution and heat sealing resistance are improved allowing perfect hiding power and appearance of printing on otherwise problematic substrates. Tytan AP20 however is more user-friendly as the addition of the ethanol strongly reduces the pour point and as such the possibility for crystallization at low to normal temperatures. Tytan AP20 can only be used in solvent based inks and coatings.
-
Tytan AP110 is modified from Tytan AP100, which is aiming for better compatibility with various ink formulations. Tytan AP110 is proved offering the same adhesion performance as Tytan AP100, in addition, preventing the viscosity changed during printing process.
-
Tytan AP100 is a Titanium Phosphate Complex of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan AP100 is mainly designed to strongly increase adhesion of solvent based inks to a variety of plastics used for food packaging or other purposes. Tytan AP100 is transparent and therefore most suitable for modification of ink for very clear-colour and high-gloss printing. Tytan AP100 is low odour and applies to the most stringent contemporary legislation on registration of the ECB. Tytan AP100 can only be used in solvent based inks.
-
Tytan AP910D is an ethyl citrate zirconium that can be used as an adhesion promoter for printing, crosslinker for paints and as a catalyst for esterification. Due to its chelated structure, Tytan AP910D shows delayed reaction at ambient temperature and thus facilitates storage stability of inks. Compared with organo-titanate adhesion promoters, it shows good compatibility with PVB, CAB and CAP inks and provides minimal discoloration during the sterilizing process in the printing of milk pouches. As the temperature increases above 60oC, the zirconate can interact with functional groups such as -OH, -COOH, -NH2 in the polymer or substrate.
-
Tytan AP110 is modified from Tytan AP100, which is aiming for better compatibility with various ink formulations. Tytan AP110 is proved offering the same adhesion performance as Tytan AP100, in addition, preventing the viscosity changed during printing process.
-
Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. Tytan AQ5000 is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT without sacrificing the performance when the water content increased in the system. Therefore, Tytan AQ5000 delivers reliable and high performance during the processing.
-
Filler Reinforcing agent New generation “High Dispersible Silica” (HDS silica) For food applications OSC has Halal and Kosher certification. Rolling Resistance and Wet Traction:
- Overcome the difficulties of improving wet traction and rolling resistance for rubber industry. Cooperate with appropriate polymers and silane coupling agents, increasing wet traction/ - Reducing rolling resistance
- Better fuel efficiency in high performance
- PCR and TBR tires
- Free flow additive
- Carrier additive applications for the food and industrial powders
- Over 20 products ranging from 9 microns to 250 microns, with surface areas from 90 to 200 m2/g
-
Precipitated silica Filler Reinforcing agent New generation “High Dispersible Silica” (HDS silica) For food applications OSC has Halal and Kosher certification. Rolling Resistance and Wet Traction:
- Overcome the difficulties of improving wet traction and rolling resistance for rubber industry. Cooperate with appropriate polymers and silane coupling agents, increasing wet traction/ - Reducing rolling resistance
- Better fuel efficiency in high performance
- PCR and TBR tires
- Free flow additive
- Carrier additive applications for the food and industrial powders
- Over 20 products ranging from 9 microns to 250 microns, with surface areas from 90 to 200 m2/g
-
An inverse emulsion thickener which imparts a short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a pH range of 1-14. Supplied as an easy to use, low viscosity liquid which gives an instantaneous thickening effect on direct mixing into the composition. The polymer is already in solution (as the sodium salt) and requires no other additives to promote thickening e.g. alkali, surfactant etc.
-
An anionic inverse emulsion thickener which imparts an extremely short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a wide pH range. Supplied as an easy to use, low viscosity liquid which gives an instantaneous thickening effect on direct mixing into the composition. The polymer in is already in solution (as the ammonium salt) and not requiring any other additives to promote thickening e.g. alkali, surfactant etc. APEO free.
-
Inverse emulsion thickener imparting very short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a broad pH range with nearly instantaneous thickening.
-
An inverse emulsion thickener which imparts a short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a wide pH range. Low viscosity liquid which instantaneous thickening effect on direct mixing into a composition. The polymer in is already in solution (as the sodium salt) and requiring no additional additives to promote thickening e.g. alkali, surfactant etc. APEO free.
-
Anionic inverse emulsion thickener. Imparts a long stringy flow to a wide variety of aqueous and non-aqueous compositions and is effective over a wide pH range. Low viscosity liquid which gives instantaneous thickening on direct mixing into the composition. The polymer is already in solution (as the sodium salt) and does not require any other additives to promote thickening e.g. alkali, surfactant etc. APEO free.
-
TDU 200M is an aromatic substituted urea based on accelerator [1,1-(4 methyl-m-phenylen, bis(3,3 dimethyl urea)]. Used as an accelerator for DICY to produce shelf stable on part systems. Perfect for adhesives, powder coatings, prepegs, films and reinforced composites. Long pot life Fast cure and strength development High Tg CAS #17526-94-2
-
INCI name: polyquaternium-22 Acrylamide free, amphoteric conditioner. Anti stat and conditioning for hair and skin care applications. This range of products is parabens and preservative free.
-
ROFOB PY K 2R, it’s brand new universal water repellent agent specifically designed to be a fluorine and silicone free fabric treatment polymer for textile formulations. Applications in cotton, synthetic and blended materials water repellent finishing. Camping materials and cotton tarpaulins -included its blends with synthetic fiber- water column resistant finish. ROFOB PY K-2R may be added to bath together with any usual synthetic resins of high quality finishing, as well as based on polyvinyl alcohol (PVA) handle modifiers. In the same way, it may be combined with fungicides, respecting the ionicity. Properties:
- Excellent water repellent effect.
- Not oil repellency.
- Excellent durability.
- Fluorinate free.
- High water column resistance.
- Excellent application properties.
- Smooth and soft handle.
- No color brightness loose.
-
Used as a sole curing agent or as a DICY and anhydride cure accelerator in epoxy resin based formulations. Loading levels as sole curing agent: 3-5 phr Loading levels as accelerator: .5-1.5 phr Used in 1k adhesives, composites, electrical potting and powder coatings.
