- Permanent, non-leaching flame retardancy
- Halogen-free
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent low temperature flex crack resistance
- Contains n-methyl pyrrolidone (NMP)
-
A soft, halogen-free, flame retardant, aliphatic, polyurethane dispersion from Hauthaway. L-3192 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This unique urethane dispersion is manufactured at high solids and without the use of solvent. Low add-on levels of L-3192 will enable synthetic fabrics to pass various FR tests including NFPA-701 and MVSS-302. L-3192 is well suited for use in textile coatings, such as automotive upholstery, that require outstanding strength and flame retardancy. Using L-3192, a coating can be formulated to pass MVSS-302 and maintain required strength properties at a much lower coating weight than conventional coatings. This results in a much softer hand and possible cost savings. CHARACTERISTICS:
-
A partially bio-renewable resource based, NMP-free, soft, aliphatic, water-borne, polyurethane dispersion from Hauthaway. L-3360 was designed for use in textile applications as a versatile polyurethane coating. Due to its overall properties, L-3360 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. L-3360 is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance. CHARACTERISTICS:
- 50% bio-based, renewable resource content
- Superior flexibility
- Produce soft, tough, flexible, dry films
- Good UV resistance
- Very good abrasion resistance
- Superior low temperature flexibility and crack resistance
- Contains n-ethyl pyrrolidone (NEP)
-
A partially, renewable resource-based, hard, aliphatic, polyester-based, aqueous polyurethane dispersion with good chemical and water-resistance properties from Hauthaway. L-3369 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3369 produces glossy films with excellent leveling properties and good stain- and chemical-resistance to a variety of household food and cleaning products. CHARACTERISTICS:
- 42% bio-based, renewable resource content
- Good water and chemical resistance
- Low VOC content (<80 g/l less water)
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
-
A water-borne, UV-curable, polycarbonate-based polyurethane dispersion. Suggested Uses: L-3685 is designed for UV-cured plastic topcoat applications where exterior weathering durability, abrasion-resistant and chemical-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring. Characteristics:
- Excellent chemical- and stain-resistance
- Superior humidity resistance
- Forms durable, films under ambient or force-dried conditions
- APEO-free
- Fast water-release properties
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
A branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion. L-2357 was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but the use of a multiple component system is neither feasible nor desirable.
- Contains no co-solvent
- Medium hard, tough film
- Polymer branching improves film resistance properties
- Dries to clear, glossy, non-discoloring film
- Dilution and cleanup of wet material with water
-
A water-borne, UV-curable, polycarbonate-based polyurethane dispersion. L-3790 is designed for UV-cured plastic topcoat applications where exterior weathering durability, abrasion-resistant and chemical-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring. CHARACTERISTICS:
- Excellent chemical- and stain-resistance
- Superior humidity resistance
- Forms durable, films under ambient or force-dried conditions
- APEO-free
- Fast water-release properties
- Contains dipropylene glycol dimethylether (DMM) co-solvent
-
A self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. L-3786 employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market.
- One-component, self-crosslinking polymer
- High level of toughness, abrasion- and mar-resistance Outstanding water and chemical resistance
- Excellent exterior weathering performance
- Contains dipropylene glycol dimethylether (DMM) co-solvent
-
A pyrrolidone-free, acrylic polyurethane dispersion with an exceptional balance of properties. L-3773 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3773 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. CHARACTERISTICS: < Excellent toughness, abrasion and mar resistance < Good water and chemical resistance < Excellent exterior weathering performance < Can be crosslinked to enhance performance < Dilution and clean-up with ordinary tap water < Contains dipropylene glycol dimethyl ether (DMM) co-solvent
-
Ravecarb are polycarbonate diols (PCD), which are aliphatic polycarbonate with molecular weight around 500-3000, and two terminal OH groups. PCD are increasingly well known and used intermediates for high performance PU systems in sectors like synthetic leathers, various coatings and resins for flooring or wooden surfaces, paints, elastomers, adhesives, sealants, liquid inks for printers, etc. In all those sectors PCD are undisputedly considered as the ultimate solution in terms of quality improvement for mechanical resistance, chemical resistance, elongation property, UV resistance, anti-scratch and anti-stain properties.
-
Ravecarb are polycarbonate diols (PCD), which are aliphatic polycarbonate with molecular weight around 500-3000, and two terminal OH groups. PCD are increasingly well known and used intermediates for high performance PU systems in sectors like synthetic leathers, various coatings and resins for flooring or wooden surfaces, paints, elastomers, adhesives, sealants, liquid inks for printers, etc. In all those sectors PCD are undisputedly considered as the ultimate solution in terms of quality improvement for mechanical resistance, chemical resistance, elongation property, UV resistance, anti-scratch and anti-stain properties.
-
Ravecarb are polycarbonate diols (PCD), which are aliphatic polycarbonate with molecular weight around 500-3000, and two terminal OH groups. PCD are increasingly well known and used intermediates for high performance PU systems in sectors like synthetic leathers, various coatings and resins for flooring or wooden surfaces, paints, elastomers, adhesives, sealants, liquid inks for printers, etc. In all those sectors PCD are undisputedly considered as the ultimate solution in terms of quality improvement for mechanical resistance, chemical resistance, elongation property, UV resistance, anti-scratch and anti-stain properties.
-
Ravecarb are polycarbonate diols (PCD), which are aliphatic polycarbonate with molecular weight around 500-3000, and two terminal OH groups. PCD are increasingly well known and used intermediates for high performance PU systems in sectors like synthetic leathers, various coatings and resins for flooring or wooden surfaces, paints, elastomers, adhesives, sealants, liquid inks for printers, etc. In all those sectors PCD are undisputedly considered as the ultimate solution in terms of quality improvement for mechanical resistance, chemical resistance, elongation property, UV resistance, anti-scratch and anti-stain properties.