-
A room temperature curing agent designed to exhibit light color, good chemical resistance and low blush films when reacted with 190EEW bisphenol A epoxy resin. The low viscosity of this material makes it suitable for many high solids applications including self leveling flooring, floor toppings and maintenance coatings.
-
A room temperature curing agent designed to exhibit light color, good chemical resistance and low blush films when reacted with 190EEW bisphenol A epoxy resin. The low viscosity of this material makes it suitable for many high solids applications including self leveling flooring, floor toppings and maintenance coatings.
-
Resorcinol Modified Phenol Novolac Epoxy Resin. Highest functionality resorcinol modified phenol novolac epoxy resin. Maximum chemical resistance and Tg.
-
Grain size 1-4 mm Dry loose bulk density 220 +/- 30 kg/m3 pH 8-12 Porosity approx 85% Thermal conductivity .07 W/(m-k)
-
Precipitated silica Matting agents are high-performance silica developed for gloss reduction in a vast range of applications for a vast range of applications. Absorbent for ink jet paper coatings Can be used in the production of defoamers Over 20 products ranging from 2 microns to 12 microns, with surface areas from 180 to 290 m2/g The line contains a variety of products differing in surface area, particle size, and oil absorption. These matting agents are perfectly suited for wood coatings including floor, furniture and cabinet coatings. They provide the best in efficiency, clarity, and in-can stability, while allowing for good flow and leveling.
- Good choice in both waterborne or solvent systems
- Recommended for for UV Coatings Applications
- Matting agents with high clarity and less impact on viscosity
- Matting agents for Coil Coatings Applications
- Matting agents for Low VOC Coatings Applications
-
specific gravity: 1.01-1.04 visc: 250 appearance: white opaque liquid solids: 21-23 %
-
Soft, aliphatic, polyester-based, water-borne polyurethane dispersion. HD-2001was designed for use in textile applications that require a soft hand coupled with abrasion resistance, excellent adhesion and excellent resiliency. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. HD-2001is also suitable for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows HD-2001to be used as a heat-sealable coating. When properly formulated, HD-2001can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics. CHARACTERISTICS:
- Superior flexibility
- Soft, tough, flexible film
- Excellent UV resistance
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low softening point (265ºF)
-
Co-solvent free, soft, aliphatic, water-borne, polyurethane dispersion. HD-2024 was designed for use as a cost effective urethane for use in coatings or finishes for textile fabrics. This unique urethane dispersion is manufactured at high solids and without the use of solvent. HD-2024 is well suited for use as a strength additive for acrylic polymers. Whether used alone or as a strength additive, HD-2024 provides increased strength, anti-fray, and abrasion resistance properties at an affordable price. CHARACTERISTICS:
- Co-solvent free and high solids
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent UV resistance
- Excellent low temperature flexibility and crack resistance
- Very good abrasion resistance
-
A soft. aliphatic, polyester-based, aqueous polyurethane dispersion. HD-2101 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:
- Outstanding toughness and abrasion resistance
- Excellent water and chemical resistance
- Exceptionally high melting point for a medium soft polymer
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
An aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. HD-2107was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
- Extreme toughness, abrasion and mar resistance
- Outstanding water and chemical resistance
- Excellent exterior weathering performance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
An extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. HD-2117was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. CHARACTERISTICS:
- Outstanding water and chemical resistance
- Fast early water resistance development
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
A very hard, aliphatic, polyester polyurethane dispersion. HD-2120was developed for use on flexible and rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
- Superior adhesion to PVC
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Contains n-methyl pyrrolidone co-solvent
-
A hard, chemical-resistant, polyester-based, aliphatic, polyurethane dispersion. HD-2125was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. CHARACTERISTICS:
- Superior adhesion to PVC
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Contains n-methyl pyrrolidone co-solvent
-
An aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. HD-2139was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. CHARACTERISTICS:
- High gloss
- Excellent mar and wear resistance
- Excellent resistance to staining
- Remarkably high balance of physical properties
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
An aliphatic, polyester-based, water-borne polyurethane dispersion. HD-2142was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
- Superior adhesion to PVC and treated polypropylene film
- Excellent UV resistance
- Good alcohol resistance
- Good humidity resistance
- Contains n-methyl pyrrolidone co-solvent
-
An aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. HD-2209was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. CHARACTERISTICS:
- Wet look gloss
- Glass-like clarity
- Mirror like definition-of-image
- Adhesion to a wide variety of substrates: wood, plastics, textiles
- Dilution and clean up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
A co-solvent free, flame retardant, aliphatic, aqueous polyurethane dispersion. HD-2313 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This unique urethane dispersion is manufactured at high solids and without the use of solvent. Low add-on levels of HD-2313 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302, & others. HD-2313 is well suited for use in textile coatings, such as automotive upholstery, that require outstanding strength and fire retardancy without the use of antimony-oxide/decabrome chemistry. Using HD-2313, a coating can be formulated to pass MVSS-302 and maintain required strength properties at a much lower coating weight than conventional coatings. This results in a much softer hand and possible cost savings. The high solids and solvent-free nature of HD-2313make it a very cost effective urethane. CHARACTERISTICS:
- Permanent, non-leaching flame retardancy
- Contains no co-solvent
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent low temperature flex crack resistance
-
Co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. HD-2334 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. CHARACTERISTICS:
- Permanent, non-leaching flame-retardancy
- Contains no co-solvent< Good UV resistance
- Stiff, tough, flexible, dry film< High melting point (340°F)
- Good low temperature flexibility and crack resistance
-
A soft, aliphatic, polycarbonate-based, polyurethane dispersion. HD-2501 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:
- Maximum hydrolytic stability and oxidation resistance
- Outstanding toughness and abrasion resistance
- Good water and chemical resistance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. HD-2602 was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. CHARACTERISTICS:
- May be formulated into low surface tension coatings
- Excellent abrasion resistance
- Non-fugitive silicone component
- Crosslinkable for improved adhesion and performance
- Contains n-methyl pyrrolidone co-solvent
-
A low cost, aromatic, polyether-based, aqueous polyurethane dispersion. HD-3011 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. CHARACTERISTICS:
- Medium soft, tough, flexible film
- Unusually dry surface for non-blocking applications
- High melting for thermal stability
- Can be crosslinked with melamines or aziridines for true thermoset character and increased adhesion.
- Excellent hydrolytic stability
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
An aliphatic, polyurethane topcoat which produces a soft, rubbery feel at low gloss levels. Suggested Uses: Hauthane HD-3810 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
- Soft, rubbery/grabby feel
- Inherently low gloss without the use of external flatteners Silicone-free
- Can be crosslinked to enhance performance
- Forms a film at room temperature
- Low VOC: <50 g/l less water
-
A formulated, aliphatic, polyurethane topcoat which produces a soft, silky feel at low gloss levels. Suggested Uses: Hauthane HD-3820 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
- Soft, silky feel
- Low gloss
- Can be crosslinked to enhance performance
- Forms a film at room temperature
- Low VOC: <50 g/l less water
-
A formulated, aliphatic, polyurethane topcoat which produces a soft, slick feel at low gloss levels. Suggested Uses: Hauthane HD-3830 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces. Characteristics:
- Soft, slick feel
- Low gloss
- Can be crosslinked to enhance performance
- Forms a film at room temperature
- Low VOC: <50 g/l less water
-
A soft, matte finish, aliphatic, polyurethane dispersion HD-4626 can be used as a companion dulling agent for basecoat and topcoat formulas on full-grain, corrected, and split leathers. HD-4626 is particularly useful where the break of the leather is a concern. Characteristics:
- Produces a soft, tough, dull film
- Crosslink-able for improved chemical resistance
- Outstanding flexibility
- Good spraying characteristics
- Low tack for good pile down and plate-ability
-
Soft, aliphatic, water-borne, polyurethane dispersion. HD-4638 was designed for use in textile applications as a versatile polyurethane coating. Due to its overall properties, HD-4638 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. HD-4638 is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance Characteristics:
- Superior flexibility
- Soft, tough, flexible, dry film
- Excellent UV resistance
- Very good abrasion resistance
- Superior low temperature flexibility and crack resistance
- High melting point (320°F)
- Good strength properties
-
A medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. HD-4664was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart greater film flexibility. A balanced composition provides good stability with acrylic latices and confers superior strength, abrasion resistance and low temperature flexibility properties. CHARACTERISTICS:
- High solids (50%)
- Contains no co-solvent
- Medium soft, tough, dry film
- Superior abrasion resistance
- Exceptional low temperature flexibility and crack resistance
-
A hard, co-solvent free, aliphatic, aqueous polyurethane dispersion. SUGGESTED USES: HD-4669 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
- Contains no co-solvent
- Extreme toughness, abrasion and mar resistance
- Outstanding water and chemical resistance
- High melting point
- Can be crosslinked to enhance performance
-
Ultra-soft, aliphatic, water-borne urethane dispersion. HD-4670 was designed for use in textile applications that require an ultra-soft hand coupled with good strength, abrasion resistance, and excellent resiliency. Due to its overall properties, HD-4670 can be used as a finish or a coating. This versatile urethane is ideally suited for use as an anti-fray finish on textile fabrics that must have an ultra-soft hand. HD-4670 is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance. The extremely low melt temperature also allows HD-4670 to be used as a heat sealable coating. Characteristics:
- Superior flexibility
- Ultra-soft, resilient, flexible, film
- Excellent UV-resistance
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low melting point (240°F)
-
A polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. HD-6000 was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. CHARACTERISTICS:
- Superior chemical resistance
- Excellent exterior weathering durability
- Excellent humidity resistance
- Contains n-methyl pyrrolidone co-solvent
-
An anionic, aliphatic, aqueous polyurethane dispersion from Hauthaway. L-2183 is an adhesive grade polyurethane suggested for modifying industrial laminating adhesives. L-2183 may also be used in low tack pressure sensitive applications. CHARACTERISTICS
- Low activation temperature (200 F)
- Can be crosslinked to improve bond strength and heat-resistance.
- Non-crystalline nature
- Contains n-methyl pyrrolidone co-solvent.
-
An anionic, aliphatic, aqueous polyurethane dispersion with a low activation temperature from Hauthaway. L-2245 is an adhesive grade polyurethane suggested for industrial laminating applications where a pre-lamination coating is applied to a substrate and then dried. Ideal for bonding plasticized vinyl sheet to itself and to other substrates such as rubber, wood, cardboard and textiles. CHARACTERISTICS:
- May be crosslinked for improved adhesion and heat-resistance.
- Non-crystalline nature
- Low level of n-methyl pyrrolidone (NMP) co-solvent (~2%)
