-
Bio based grinding agent and carrier for carbon black. Based on polymeric blend of triglycerides and surfactants. This product can be used as grinding agent for carbon black and a carrier for pigment pastes. Cost effective, increased milling speeds and cb loading.
-
DeTHOX TDA-8.5-15W is anonionic, 85% active, tridecyl alcohol ethoxylated with approximately 8 -9 moles of EO. It contains ~15% water to maintain fluidity for easy handling. APPLICATIONS • High foam alkaline and acid detergents • Solubilizer for alkyl aryl sulfonates • Wetting agent in highly acidic systems • Emulsion paint strippers • Solubilizer for fragrances and oils • Textile detergents•Agricultural spray emulsions • Floor cleaners • High pressure spray cleaners • Emulsion polymerization • Wetting agent for corrosion inhibitors • Pulp & paper processing • Dust suppressant for mining operations • Vehicle wash detergents
-
DeTHOX AMINE C-15 is an ethoxylated coconut amine with fifteen moles of ethylene oxide.It exhibits mildly cationic behavior and is used primarily used as an emulsifier, lubricant, corrosion inhibitor,and dispersant. APPLICATIONS • Water based inks • Wetting and leveling agent for use in dyeing applications • Emulsifier for agricultural chemicals • Lubricant in synthetic cutting fluids • Corrosion inhibitor in down-hole drilling applications • Latex emulsifier and stabilize
-
DeTAINE PB is a readily biodegradable, palmitic derived betaine acceptable for use in a wide variety of formulations including Personal Care applications (INCI name: Cetyl Betaine). This amphoteric, alcohol-free betaine produces rich, dense foam and affords good viscosity building properties. Suggested for use in acidic and alkaline formulations. APPLICATIONS • Alkaline or acid foaming cleaners • Bowl cleaners • Vertical surface cleaners • Fine laundry and fabric detergents • Manual hand dishwashing detergents • Viscosity & foam builder for liquid detergents • Car wash detergents • Hand cleansers, shampoo, body wash • Sulfate-free personal care products
-
DeSULF SO-LF33 is a moderate foaming anionic, 33% active,sodium octylsulfate. APPLICATIONS • Caustic cleaners • Alkaline or mild acid cleaners • Cleaners containing chlorine or peroxide • All purpose cleaners • Rinse aid for mechanical dishwashing • Glass cleaners•Fire fighting agents • Mercerizing agents for textiles • Wetting agent for synthetic coolants • High pressure spray detergents • Metal cleaners • Carpet extraction cleaners
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
