-
PANGEL W range is formulated to work as thickener and water retention additive in emulsion paints. PANGEL W is a highly efficient thickener based upon organically modified clay manufactured from highly purified sepiolite, that produces high low shear viscosity without impairing the application properties of the formula. Viscosity is not influenced by temperature no pH and together with pseudoplasticity has also a thixotropy. Exhibits water retention properties with increased open time. PANGEL W offers the following properties in water based formulations:
- Easy to disperse
- Specially suitable for high solids content formulations
- Increase productivity
- Excellent can stability
- Reduces syneresis
- Adequate consistency
- Excellent sag control
- Avoids sedimentation
- Good leveling
-
Pansil 100 is a polyfunctional additive manufactured from sepiolite. Its thick powder granulometry makes it easy to handle and use. It is an excellent suspension aid and active filler with an outstimding efficiency/cost ratio.
-
PANSIL 400 is a polyfunctional additive, supplied as a fine powder manufactured from sepiolite. It is an excellent suspension aid and active filler with an outstanding efficiency/cost ratio.
Properties
PANSIL 400, due to its high surface activity produces an increase in system component distribution favouring the increase of immature resistance and keeping stability after high temperature curing. PANSIL 400 improves polymer, filler, organic and inorganic fibre distribution.Fields of application
- Asphalt sheets.
- Conglomerating in molecular sieves.
- Seed coating.
- Asphalt emulsions.
-
Fumed silica rheology additive, treated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
ROFOB PY K 2R, it’s brand new universal water repellent agent specifically designed to be a fluorine and silicone free fabric treatment polymer for textile formulations. Applications in cotton, synthetic and blended materials water repellent finishing. Camping materials and cotton tarpaulins -included its blends with synthetic fiber- water column resistant finish. ROFOB PY K-2R may be added to bath together with any usual synthetic resins of high quality finishing, as well as based on polyvinyl alcohol (PVA) handle modifiers. In the same way, it may be combined with fungicides, respecting the ionicity. Properties:
- Excellent water repellent effect.
- Not oil repellency.
- Excellent durability.
- Fluorinate free.
- High water column resistance.
- Excellent application properties.
- Smooth and soft handle.
- No color brightness loose.
-
INCI name: polyquaternium-22 Acrylamide free, amphoteric conditioner. Anti stat and conditioning for hair and skin care applications. This range of products is parabens and preservative free.
-
Anionic inverse emulsion thickener. Imparts a long stringy flow to a wide variety of aqueous and non-aqueous compositions and is effective over a wide pH range. Low viscosity liquid which gives instantaneous thickening on direct mixing into the composition. The polymer is already in solution (as the sodium salt) and does not require any other additives to promote thickening e.g. alkali, surfactant etc. APEO free.
-
An inverse emulsion thickener which imparts a short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a wide pH range. Low viscosity liquid which instantaneous thickening effect on direct mixing into a composition. The polymer in is already in solution (as the sodium salt) and requiring no additional additives to promote thickening e.g. alkali, surfactant etc. APEO free.
-
Inverse emulsion thickener imparting very short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a broad pH range with nearly instantaneous thickening.
-
An anionic inverse emulsion thickener which imparts an extremely short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a wide pH range. Supplied as an easy to use, low viscosity liquid which gives an instantaneous thickening effect on direct mixing into the composition. The polymer in is already in solution (as the ammonium salt) and not requiring any other additives to promote thickening e.g. alkali, surfactant etc. APEO free.
-
An inverse emulsion thickener which imparts a short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a pH range of 1-14. Supplied as an easy to use, low viscosity liquid which gives an instantaneous thickening effect on direct mixing into the composition. The polymer is already in solution (as the sodium salt) and requires no other additives to promote thickening e.g. alkali, surfactant etc.
-
Tytan AQ33 is used as an esterification and transesterification catalyst for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT when water content is higher. Tytan AQ33 can also be used as adhesion promoter or cross linking agent for water based coating on various surface. Suggested dosage is 0.1 ~ 1% as catalyst and 0.5 ~ 5% as cross linking agent.
-
Tytan AQZ30 is a Zirconium triethanolamine complex that readily hydrolyses in water to produce a hydroxyl zirconium chelate. This will readily crosslink with –OH and –COOH groups in solvent and aqueous systems to form strong gels and has the potential to act as an adhesion promoter. AQZ30 is an effective rheology modifier for functionalised guar derivatives for secondary and tertiary recovery of oil and gas wells. It has the ability to crosslink in both water-borne and solvent-borne coatings and provides adhesion in water-borne and solvent-borne printing inks. Compared with titanium based alkanolamines, AQZ30 offers prevention against yellowing of the polymer in use.
-
Tytan coupling agents can enhance the dispersion of inorganic fillers in polymer systems such as PP, PE, by modifying the surface of filler particles. The content of fillers can therefore be increased, saving the cost of polymer, while maintaining the mechanical property.
-
TYTAN Titanate Coupling & Dispersing Agents are molecular bridges at the interface between inorganic fillers (such as CaCO3, BaSO4, graphite, talc, carbon black, silica and metal oxides) and polymers (such as PP, PE, PVC, PBT, PET, ABS and rubbers). When incorporated into polymers, the coupling agent could improve filler loading, pigment dispersion, processability and composite mechanical properties to achieve the specification desired. As a comparison, silane coupling agents only reacts with hydroxyl groups on the filler surface via water condensation of silanol-siloxane process, therefore it is suitable for glass, alumina hydroxide, magnesium hydroxide etc. The advantage of titanate coupling agents is that they not only react with hydroxyls, but also the free protons on the inorganic interface, which results in the formation of organic monomolecular layers on the inorganic surface forming the bonding for polymers. Dosage is up to the property required and the filler type used is dependent on its surface area, the larger the surface area, the more Tytan titanate coupling & dispersing agent are needed. As a guide, the general dosage range is 0.2% ~ 2.0% by weight of filler.
-
Tytan CX100 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX100 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX100 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Use of Tytan CX100 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
Tytan CX200 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX200 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX200 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Tytan CX200 has improved compatibility with a broad range of paint formulations but it is still recommended that use of Tytan CX200 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
