-
An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. L-3466was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. CHARACTERISTICS:
- May be formulated into low surface tension coatings
- Exceptional dye transfer resistance
- Excellent abrasion resistance
- Higher silicone content (~2X) than HD-2602
- Crosslinkable for improved adhesion and performance
- Contains n-ethyl pyrrolidone (NEP) co-solvent
-
A VOC-free, non-ionic, UV-curable polyurethane dispersion. L-3415 is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. CHARACTERISTICS:
- VOC-free, APEO surfactant free
- Non-ionic stabilization
- Excellent chemical and stain resistance
- Superior abrasion resistance
- Fast water release properties
-
A self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use inhigh performance concrete and wood floor coatings. L-3155employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. CHARACTERISTICS:
- One-component, self-crosslinkingpolymer
- High level oftoughness, abrasion-and mar-resistance
- Outstanding water and chemical resistance
- Excellent exterior weathering performance
- Contains n-methyl pyrrolidone(NMP) co-solvent
-
A hard, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, water-borne polyurethane dispersion. L-2897 was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. CHARACTERISTICS:
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Superior adhesion to PVC
-
A very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. L-2882 was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
- Superior adhesion to PVC
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Contains dipropylene glycol dimethyl ether cosolvent
-
An aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. HD-2209was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. CHARACTERISTICS:
- Wet look gloss
- Glass-like clarity
- Mirror like definition-of-image
- Adhesion to a wide variety of substrates: wood, plastics, textiles
- Dilution and clean up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
An aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. HD-2139was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. CHARACTERISTICS:
- High gloss
- Excellent mar and wear resistance
- Excellent resistance to staining
- Remarkably high balance of physical properties
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
A hard, chemical-resistant, polyester-based, aliphatic, polyurethane dispersion. HD-2125was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. CHARACTERISTICS:
- Superior adhesion to PVC
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Contains n-methyl pyrrolidone co-solvent
-
A very hard, aliphatic, polyester polyurethane dispersion. HD-2120was developed for use on flexible and rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
- Superior adhesion to PVC
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Contains n-methyl pyrrolidone co-solvent
-
An aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. HD-2107was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
- Extreme toughness, abrasion and mar resistance
- Outstanding water and chemical resistance
- Excellent exterior weathering performance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
A soft. aliphatic, polyester-based, aqueous polyurethane dispersion. HD-2101 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:
- Outstanding toughness and abrasion resistance
- Excellent water and chemical resistance
- Exceptionally high melting point for a medium soft polymer
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
Soft, aliphatic, polyester-based, water-borne polyurethane dispersion. HD-2001was designed for use in textile applications that require a soft hand coupled with abrasion resistance, excellent adhesion and excellent resiliency. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. HD-2001is also suitable for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows HD-2001to be used as a heat-sealable coating. When properly formulated, HD-2001can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics. CHARACTERISTICS:
- Superior flexibility
- Soft, tough, flexible film
- Excellent UV resistance
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low softening point (265ºF)
-
ANMP-free, TEA-free, aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. L-3645was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3645contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles.It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white boardapplications when crosslinked. CHARACTERISTICS:
- May be formulated into low surface tension coatings
- Exceptional dye transfer resistance
- Excellent abrasion resistance
- Higher silicone content (~2X) than HD-2602
- Crosslinkable for improved adhesion and performance
- Contains dipropylene glycol dimethylether(DMM) and dipropylene glycol monomethyl ether (DPM) co-solvent
-
An aliphatic, polyester-based, water-borne polyurethane dispersion. HD-2142was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
- Superior adhesion to PVC and treated polypropylene film
- Excellent UV resistance
- Good alcohol resistance
- Good humidity resistance
- Contains n-methyl pyrrolidone co-solvent
-
Soft, aliphatic, water-borne polyurethane dispersion in a blend of DMM and propylene glycol solvents. L-2985 was designed for use in textile applications that require a soft hand coupled with very good strength, abrasion resistance, excellent adhesion, and excellent resiliency. Due to its overall properties, L-2985 can be used as a finish or a coating. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. L-2985is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows L-2985to be used as a heat seal coating. When properly formulated, L-2985can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics. CHARACTERISTICS:
- NMP-free, APEO-free
- Superior flexibility
- Soft, tough, flexible film
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low melting point (265ºF)
-
A soft, aliphatic, polyester-based, aqueous polyurethane dispersion. L-2969was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-2969 may also be used as a blending resin with harder polyurethane dispersions to impart flexibility without adversely effecting chemical resistance. CHARACTERISTICS:
- Outstanding toughness and abrasion resistance
- Excellent water and chemical resistance
- Exceptionally high melting point for a medium soft polymer
- Can be crosslinked to enhance performance
- Dilution and clean-up with water
- Contains dipropylene glycol dimethyl ether co-solvent
-
An extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. L-2892was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2892 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. CHARACTERISTICS:
- Contains dipropylene glycol dimethyl ether (DMM) co-solvent
- Outstanding water and chemical resistance
- Fast early water resistance development
- Can be crosslinked to enhance performance
-
An NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. L-2883 was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X D401. The product, when crosslinked provides tough, chemical-resistant, semi-gloss coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. CHARACTERISTICS:
- Superior chemical resistance
- Excellent exterior weathering durability
- Excellent humidity resistance
- Contains dipropylene glycol dimethyl ether co-solvent
-
A soft, NMP-free, APEO-free, aliphatic, water-borne, polyurethane dispersion. L-2961 was designed for use in textile applications as a versatile polyurethanecoating. Due to its overall properties, L-2961 can be used as a finish or a coating for many textile applications. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. L-2961is also suitable for textile coating applications that require excellent low temperature flexibility and crack resistance. CHARACTERISTICS:
- Forms soft, flexible, dry films
- Excellent UV-resistance
- Good abrasion resistance
- Superior low temperature flexibility and crack resistance
- High melting point (320°F)Contains dipropylene glycol dimethyl ether (DMM) co-solvent
-
A polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. HD-6000 was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. CHARACTERISTICS:
- Superior chemical resistance
- Excellent exterior weathering durability
- Excellent humidity resistance
- Contains n-methyl pyrrolidone co-solvent
-
An NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. Suggested Uses: L-2857 was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. Characteristics:
- May be formulated into low surface tension coatings
- Excellent abrasion resistance
- Non-fugitive silicone component
- Crosslinkable for improved adhesion and performance
- Contains dipropylene glycol dimethyl ether co-solvent
-
An NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. SUGGESTED USES:L-2942was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. CHARACTERISTICS:
- Superior adhesion to PVC and treated polypropylene film
- Excellent UV resistance
- Exceptional alcohol resistance
- Humidity resistance
- Contains dipropylene glycol dimethyl ether (DMM) co-solven
-
A hard, co-solvent free, aliphatic, aqueous polyurethane dispersion. SUGGESTED USES: HD-4669 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
- Contains no co-solvent
- Extreme toughness, abrasion and mar resistance
- Outstanding water and chemical resistance
- High melting point
- Can be crosslinked to enhance performance
-
A medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. HD-4664was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart greater film flexibility. A balanced composition provides good stability with acrylic latices and confers superior strength, abrasion resistance and low temperature flexibility properties. CHARACTERISTICS:
- High solids (50%)
- Contains no co-solvent
- Medium soft, tough, dry film
- Superior abrasion resistance
- Exceptional low temperature flexibility and crack resistance
-
Co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. HD-2334 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. CHARACTERISTICS:
- Permanent, non-leaching flame-retardancy
- Contains no co-solvent< Good UV resistance
- Stiff, tough, flexible, dry film< High melting point (340°F)
- Good low temperature flexibility and crack resistance
-
A co-solvent free, flame retardant, aliphatic, aqueous polyurethane dispersion. HD-2313 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This unique urethane dispersion is manufactured at high solids and without the use of solvent. Low add-on levels of HD-2313 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302, & others. HD-2313 is well suited for use in textile coatings, such as automotive upholstery, that require outstanding strength and fire retardancy without the use of antimony-oxide/decabrome chemistry. Using HD-2313, a coating can be formulated to pass MVSS-302 and maintain required strength properties at a much lower coating weight than conventional coatings. This results in a much softer hand and possible cost savings. The high solids and solvent-free nature of HD-2313make it a very cost effective urethane. CHARACTERISTICS:
- Permanent, non-leaching flame retardancy
- Contains no co-solvent
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent low temperature flex crack resistance
-
An extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. HD-2117was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. CHARACTERISTICS:
- Outstanding water and chemical resistance
- Fast early water resistance development
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
Ravecarb are polycarbonate diols (PCD), which are aliphatic polycarbonate with molecular weight around 500-3000, and two terminal OH groups. PCD are increasingly well known and used intermediates for high performance PU systems in sectors like synthetic leathers, various coatings and resins for flooring or wooden surfaces, paints, elastomers, adhesives, sealants, liquid inks for printers, etc. In all those sectors PCD are undisputedly considered as the ultimate solution in terms of quality improvement for mechanical resistance, chemical resistance, elongation property, UV resistance, anti-scratch and anti-stain properties.
-
Ravecarb are polycarbonate diols (PCD), which are aliphatic polycarbonate with molecular weight around 500-3000, and two terminal OH groups. PCD are increasingly well known and used intermediates for high performance PU systems in sectors like synthetic leathers, various coatings and resins for flooring or wooden surfaces, paints, elastomers, adhesives, sealants, liquid inks for printers, etc. In all those sectors PCD are undisputedly considered as the ultimate solution in terms of quality improvement for mechanical resistance, chemical resistance, elongation property, UV resistance, anti-scratch and anti-stain properties.
