-
A low to moderate foaming, anionic surfactant having detergency, wetting and solubilizing properties. Soluble in water, alcohols and glycols. It is insoluble in most solvents and oils.
-
A modified C8-12 sodium salt of a carboxylated propionate. Soluble in water, alcohols, and glycols. It is insoluble in oils and solvents.
-
Is an organic phosphated amphoteric that is soluble and stable in up to 50% liquid caustic soda and up to 45% liquid caustic potash. It exhibits low, quick breaking foam with wetting and surface tension reduction properties in highly caustic applications. It has excellent color stability in high caustic environments.
-
A sodium lauriminodipropionate. A versatile, high foaming amphoteric surfactant which finds utility in a wide variety of HI&I cleaning formulations. Also suitable for personal care applications, is readily biodegradable and exhibits low toxicity. Soluble in water, glycols and alcohols; insoluble in oils and solvents.
-
A low foaming sodium octyliminodipropionate. Its primary use is for demulsification in water based systems. It also exhibits excellent hydrotroping properties in highly alkaline or acid formulations. Soluble in water, alcohols, and glycols. It is insoluble in oils and most solvents.
-
DeTHOX AMINE C-15 is an ethoxylated coconut amine with fifteen moles of ethylene oxide.It exhibits mildly cationic behavior and is used primarily used as an emulsifier, lubricant, corrosion inhibitor,and dispersant. APPLICATIONS • Water based inks • Wetting and leveling agent for use in dyeing applications • Emulsifier for agricultural chemicals • Lubricant in synthetic cutting fluids • Corrosion inhibitor in down-hole drilling applications • Latex emulsifier and stabilize
-
DeTHOX TDA-8.5-15W is anonionic, 85% active, tridecyl alcohol ethoxylated with approximately 8 -9 moles of EO. It contains ~15% water to maintain fluidity for easy handling. APPLICATIONS • High foam alkaline and acid detergents • Solubilizer for alkyl aryl sulfonates • Wetting agent in highly acidic systems • Emulsion paint strippers • Solubilizer for fragrances and oils • Textile detergents•Agricultural spray emulsions • Floor cleaners • High pressure spray cleaners • Emulsion polymerization • Wetting agent for corrosion inhibitors • Pulp & paper processing • Dust suppressant for mining operations • Vehicle wash detergents
-
A liquid, anhydrous modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous and powdered alkaline systems. It also functions as a corrosion inhibitor for aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
A modified carboxylate. It is recommended for use as a low foaming hydrotrope in aqueous alkaline systems. It also functions as a corrosion inhibitor for steel & aluminum in aqueous systems above pH 7.0. Soluble in water, alcohols and glycols. It is insoluble or dispersible in most solvents and oils.
-
A 45% active sodium alkanoate in water. It is a highly effective, multifunctional, low foam hydrotrope recommended for use in cleaners at pH above 7. Chlorine stable and also exhibits wetting and corrosion inhibition properties. Soluble in water, alcohols and glycols and insoluble or dispersible in oils and solvents.
-
A room temperature curing agent designed to exhibit light color, good chemical resistance and low blush films when reacted with 190EEW bisphenol A epoxy resin. The low viscosity of this material makes it suitable for many high solids applications including self leveling flooring, floor toppings and maintenance coatings.
-
A room temperature curing agent designed to exhibit light color, good chemical resistance and low blush films when reacted with 190EEW bisphenol A epoxy resin. The low viscosity of this material makes it suitable for many high solids applications including self leveling flooring, floor toppings and maintenance coatings.
-
Resorcinol Modified Phenol Novolac Epoxy Resin. Highest functionality resorcinol modified phenol novolac epoxy resin. Maximum chemical resistance and Tg.
-
Grain size 1-4 mm Dry loose bulk density 220 +/- 30 kg/m3 pH 8-12 Porosity approx 85% Thermal conductivity .07 W/(m-k)
-
Precipitated silica Matting agents are high-performance silica developed for gloss reduction in a vast range of applications for a vast range of applications. Absorbent for ink jet paper coatings Can be used in the production of defoamers Over 20 products ranging from 2 microns to 12 microns, with surface areas from 180 to 290 m2/g The line contains a variety of products differing in surface area, particle size, and oil absorption. These matting agents are perfectly suited for wood coatings including floor, furniture and cabinet coatings. They provide the best in efficiency, clarity, and in-can stability, while allowing for good flow and leveling.
- Good choice in both waterborne or solvent systems
- Recommended for for UV Coatings Applications
- Matting agents with high clarity and less impact on viscosity
- Matting agents for Coil Coatings Applications
- Matting agents for Low VOC Coatings Applications
-
specific gravity: 1.01-1.04 visc: 250 appearance: white opaque liquid solids: 21-23 %
-
Soft, aliphatic, polyester-based, water-borne polyurethane dispersion. HD-2001was designed for use in textile applications that require a soft hand coupled with abrasion resistance, excellent adhesion and excellent resiliency. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. HD-2001is also suitable for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows HD-2001to be used as a heat-sealable coating. When properly formulated, HD-2001can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics. CHARACTERISTICS:
- Superior flexibility
- Soft, tough, flexible film
- Excellent UV resistance
- Good abrasion resistance
- Superior low temperature, flex-crack resistance
- Low softening point (265ºF)
-
Co-solvent free, soft, aliphatic, water-borne, polyurethane dispersion. HD-2024 was designed for use as a cost effective urethane for use in coatings or finishes for textile fabrics. This unique urethane dispersion is manufactured at high solids and without the use of solvent. HD-2024 is well suited for use as a strength additive for acrylic polymers. Whether used alone or as a strength additive, HD-2024 provides increased strength, anti-fray, and abrasion resistance properties at an affordable price. CHARACTERISTICS:
- Co-solvent free and high solids
- Excellent cost/performance ratio
- Soft, tough, flexible, dry film
- Excellent UV resistance
- Excellent low temperature flexibility and crack resistance
- Very good abrasion resistance
-
A soft. aliphatic, polyester-based, aqueous polyurethane dispersion. HD-2101 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. CHARACTERISTICS:
- Outstanding toughness and abrasion resistance
- Excellent water and chemical resistance
- Exceptionally high melting point for a medium soft polymer
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
An aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. HD-2107was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. CHARACTERISTICS:
- Extreme toughness, abrasion and mar resistance
- Outstanding water and chemical resistance
- Excellent exterior weathering performance
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
-
An extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. HD-2117was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. CHARACTERISTICS:
- Outstanding water and chemical resistance
- Fast early water resistance development
- Can be crosslinked to enhance performance
- Dilution and clean-up with ordinary tap water
- Contains n-methyl pyrrolidone (NMP) co-solvent
