-
Appearance: clear to slightly yellow liquid Solids: 32% pH: 12-13 lbs per gallon: 10.2 Solvent: water
-
Colloidal silica acrylic sealer
-
Grain size 1-4 mm Dry loose bulk density 220 +/- 30 kg/m3 pH 8-12 Porosity approx 85% Thermal conductivity .07 W/(m-k)
-
Bio based grinding agent and carrier for carbon black. Based on polymeric blend of triglycerides and surfactants. This product can be used as grinding agent for carbon black and a carrier for pigment pastes. Cost effective, increased milling speeds and cb loading.
-
Neutral dispersion of 20 nm colloidal silica (30%) in water. This product can be used in investment casting, polishing, metal surface treatment and catalyst binder applications. The silica has been surface treated for improve stability at low and mid range pH.
-
Suitable for a variety of applications:
- CASE and foam markets
- one and two component systems
- ambient, moisture and heat cured systems n building block for prepolymers
- Excellent water and moisture resistance
- Excellent acid and alkali resistance
- Very good hydrolytic stability
- Fire and thermal resistance
- Can be tailored for different properties
- Available in low to high functionalities
-
Cardolite NX-9005 is a unique polyol suitable for polyurethane coatings and adhesives. This product has well balanced mechanical properties, high tensile strength and excellent elongation. Non-CNSL Branched Polyol - good UV resistance. Offset Desmophen 1150 and Sovermol 805/1080
-
Cardolite NX-202x products are low viscosity multipurpose resin modifiers. The long hydrophobic aliphatic side chain of the cardanol molecule gives these products a very low viscosity and provides excellent early water resistance and corrosion protection. By using NX-202x products as epoxy diluents and accelerators, high solids or solvent free formulations can be achieved with enhanced workability and faster cure without sacrificing other performance properties. In addition, the flexibility of the side chain helps increase impact resistance of the final coating. Different Grades Available. NX-2023 can replace nonyl phenol. NX 2023 is non toxic,exhibits higher visc reduction, does not reduce gel time like NP, and shows improved water resistance. These products are a good alternative to synthetic phenolic diluents that have unfavorable labeling.
-
Cardolite NT-1300 is an tertiary amine catalyst. Offset to Ancamine k54.
-
PANGEL CS 610 is a pozzolanic additive based on colloidal silica with very fine (7 nanometers) and narrow particle size distribution. Its rapid surface penetration leads to very fast bonding with calcium hydroxide [Ca(OH)2] which provides an outstanding densifier/hardener effect. PROPERTIES • PANGEL CS 610 reacts with calcium hydroxide in the concrete matrix to create additional calcium silicate hydrates (C-S-H). • PANGEL CS 610 provides a harder and more uniform surface making it withstand abrasion and take a better polish effect. • Due to its unique structure, PANGEL CS 610 works as densifier/ hardener in concrete flooring applications providing better overall mechanical performance (surface hardness, compressive strength, permeability and abrasion resistance ) thus replacing other silicate densifiers. PANGEL CS610 provides tangible benefits and savings vs. other silicate based (i.e. sodium, potassium, lithium) densifiers: • Reduces operating costs by increased ease of maintenance and cleaning • Speed of application; no overnight curing • Deeper penetration • Faster reacting • Safe to handle liquid – lower pH than silicates • Reduces dusting, efflorescence and ASR • Compatible with colored concrete, stains and dyes • No whitening potential; no caustic gel to scrub off • Non-hazardous. Water-based, low odor
-
PANGEL RMA series is managing rheology on demand, improving cohesion, reducing bleeding and segregation and enhancing concrete pumping operations. PANGEL RMA 400 series are high performance liquid concrete admixtures based on silicates modified and specifically developed for shotcrete. PANGEL RMA 400 series increase sprayed concrete cohesion providing superior bond to rock substrate, faster early strength development and enhancing sprayability and pumpability properties, minimizing the rebound and allowing larger thickness build-up in a single pass in tunnels and mining applications. PANGEL® RMA 400 series is specially developed for underground: • Temporary and permanent rock support in mining and tunneling • Slope stabilization • Grouting FEATURES & BENEFITS • Reduces/ replaces silica fume/ microsilica • Enhances sprayability properties • Reduces rebound reducing materials waste • Increases thickness build-up in single pass • Increases very early strength • Safer, healthier reducing dust generation • Increases mix design robustness allowing moisture and grading tolerances PANGEL RMA 400 series increase concrete cohesion developing faster early strength without affecting other concrete plastic properties (slump life, air control management) and enhancing pumpability.
-
CIMSIL G30 is an attapulgite based additive specifically developed to modify rheology of wet and dry joint compounds and adhesives. CIMSIL G30 is a rheological additive fully inert and compatible with most common binders either organic or inorganic being particularly effective in highly viscous filling pastes as joint compound for drywall or plasterboards. CIMSIL G30 improves the following properties: • Sag resistance. • Workability. • Improves spreading and pumpability. • Decreases bleed and segregation during storage. • Gives homogeneity to the finish product. • Improves consistency and viscosity under high electrolyte concentration. CIMSIL G30 is a shear thinning additive what allows the right application on the wall while strongly improves sag resistance of the compound before drying or setting. It is normally combined with cellulose ethers showing a good compatibility with them and also with other organic thickeners.It can be also used in cement mortars and other cement based systems in order to provide shear thinning properties. Fields of application • Wet and dry Joint fillers. •S packle compounds. • Crack fillers & mastics. • Sealants.
