Water based

  • DePHOS 4AL is a low – moderate foaming phosphate ester in free acid form. Suggested for use as a lubricant, corrosion inhibitor, and emulsifier in metal working applications. Very effective for aluminum machining applications. APPLICATIONS: • Metal working products • Rolling oils • Emulsion Cleaner • Alkaline cleaners
  • DeTHOX TDA-8.5-15W is anonionic, 85% active, tridecyl alcohol ethoxylated with approximately 8 -9 moles of EO. It contains ~15% water to maintain fluidity for easy handling. APPLICATIONS • High foam alkaline and acid detergents • Solubilizer for alkyl aryl sulfonates • Wetting agent in highly acidic systems • Emulsion paint strippers • Solubilizer for fragrances and oils • Textile detergents•Agricultural spray emulsions • Floor cleaners • High pressure spray cleaners • Emulsion polymerization • Wetting agent for corrosion inhibitors • Pulp & paper processing • Dust suppressant for mining operations • Vehicle wash detergents
  • DeTHOX AMINE C-15 is an ethoxylated coconut amine with fifteen moles of ethylene oxide.It exhibits mildly cationic behavior and is used primarily used as an emulsifier, lubricant, corrosion inhibitor,and dispersant. APPLICATIONS • Water based inks • Wetting and leveling agent for use in dyeing applications • Emulsifier for agricultural chemicals • Lubricant in synthetic cutting fluids • Corrosion inhibitor in down-hole drilling applications • Latex emulsifier and stabilize
  • DeTERGE AN508-LFis a complex modified amphoteric surfactant. APPLICATIONS • Low foam, alkaline detergents • Caustic cleaners • Acid cleaners • Mechanical dishwashing detergents • High pressure alkaline detergents • Steam cleaners•Metal cleaners • Food plant and dairy cleaners • Plating baths•Concrete cleaners • Alkaline soak and tank cleaners • Alkaline paint stripper • Mechanical hard surface cleaner formulations • Aircraft and aluminum cleaners
  • DeTAINE PB is a readily biodegradable, palmitic derived betaine acceptable for use in a wide variety of formulations including Personal Care applications (INCI name: Cetyl Betaine). This amphoteric, alcohol-free betaine produces rich, dense foam and affords good viscosity building properties. Suggested for use in acidic and alkaline formulations. APPLICATIONS • Alkaline or acid foaming cleaners • Bowl cleaners • Vertical surface cleaners • Fine laundry and fabric detergents • Manual hand dishwashing detergents • Viscosity & foam builder for liquid detergents • Car wash detergents • Hand cleansers, shampoo, body wash • Sulfate-free personal care products
  • DeSULF SO-LF33 is a moderate foaming anionic, 33% active,sodium octylsulfate. APPLICATIONS • Caustic cleaners • Alkaline or mild acid cleaners • Cleaners containing chlorine or peroxide • All purpose cleaners • Rinse aid for mechanical dishwashing • Glass cleaners•Fire fighting agents • Mercerizing agents for textiles • Wetting agent for synthetic coolants • High pressure spray detergents • Metal cleaners • Carpet extraction cleaners
  • DeIONIC LF-60 is a low foaming, nonionic alkoxylated alcohol with excellent wetting and dispersing properties. APPLICATIONS • High spray pressure cleaners • Mechanical dishwashing • Industrial alkaline cleaners • Industrial metal cleaners • Liquid laundry detergents • Pigment grinding and dispersant • Bottle washing • Textile wetting and scouring • Agricultural sprays •Powdered detergents
  • DeCORE BE is a water-soluble,anionic, non-foaming amine borate. It is a very effective corrosion inhibitor for ferrous and non-ferrous metals in neutral to mildly alkaline systems including aerosol formulations. APPLICATIONS: • Synthetic coolants &cutting fluids for ferrous and non-ferrous metals • Cooling tower additive • Corrosion inhibitor for down-hole drilling • Corrosion inhibitor for radiator • Corrosion inhibitor for aerosol cans • Corrosion inhibitor for aqueous paints & coatings • Metal working fluids
  • % active: 48% specific gravity: 1.26-1.30 off white suspension  
  • Alumina powder that is dispersible in water or ethylene glycol.  For use in high temperature coating and as a binder
  • specific gravity: 1.01-1.04 visc: 250 appearance: white opaque liquid solids: 21-23 %
  • Care Care Drying Aid Accoquat CS ULTRA NF is a unique nonflammable proprietary blend of cationic and nonionic emulsifiers and is especially designed for micro-emulsification of mineral seal oils (MSO) or other organic hydrophobes. Features & Benefits: Works effectively for microemulsification of a variety of hydrophobes including mineral seal oil, waxes, and silicones
  • Active ingedients: > 96% Refractive index: 1.44-1.46 Flash point:  > 100 C Usage level: .2-.8 % total formulation
  • Thickner for alcohol solutions.
    • Stiff Gel after neutralization
    • Easy to mix and disperse
    • Pumpable and pourable without runoff
    • Stable with other inert additives such as fragrances
    • Can make gels comparable to commercial products
  • Fumed silica rheology additive, treated Applications
    • Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
    • Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
    • Unsaturated polyester resins: Thickening and thixotropy
    • Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
    • Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
    • Paper: Adsorbent, Transparency
    • Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
    • CMP: Polishing agent
    • Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
    Characteristics Thickening and thixotropy: REOLOSIL provides thickening and thixotropic effects in liquid systems such as polyesters, epoxies, and urethane resins due to interactions between aggregates and the development of three-dimensional networks between REOLOSIL particles. Reinforcement: Adding REOLOSIL as a filler material improves various mechanical properties of elastomers, including modulus, elongation at break, tensile strength and tear resistance. REOLOSIL's large specific surface area also makes it possible to achieve excellent transparency in elastomers. Anti-settling effects: REOLOSIL improves the suspension behavior in liquid systems, such as pigmented coatings or resins containing filters. Anti-caking, effects for Improved flow characteristics: Due to a property that makes it behave like bait bearings, REOLOSIL resists lumping and clogging. It can be used to improve the storage stability of powders that are especially prone to caking. REOLOSIL can also be used to improve flow characteristics and prevent flow problems. Insulation: With its very low solid state conductivity and vast spacing between particles, REOLOSIL provides excellent electrical and thermal insulation properties. Electrical charge: Hydrophobic REOLOSIL is used as a toner additive to stabilize electrical charge characteristics. TOKUYAMA can provide hydrophobic REOLOSIL grades manufactured to custom specifications. Polishing: In the semiconductor manufacturing process, the planarizalion of silicon wafers is achieved via CMP (chemical mechanical polishing) processes such as ILD, STI and metal CMP. REOLOSIL is used in certain CMP slurries as a polishing agent, due to high purity, sub-micron particle size and its distribution characteristics.      
  • 2,4,5,6 tetrachloroisopthalonitrile  (40% CTL)   Industrial fungicde (AKA Chlorothalonil) Typical areas of use are paints and coatings, adhesives, caulks and mulch colorants.  Long term mold preventative.  effective over pH range of 1-10.
  • 1,2-Benzisothiazolin-3-one  (BIT) available as zero VOC waterbased dispersion
  • 1,2-benzisothiazolin-3-one  (BIT), glycol based solution of BIT.  Effective biocide for paints, polyer lattices, adhesives, joint compound and dispersed pigments.  Does not contain or generate formaldehyde and is MIT free
  • Fumed silica matting agent Low gloss, good clarity    
  • D 50        11 microns surface area   250 m2/g pH        7.0
  • Highly cost effective quick kill at low to medium pH and at low usage levels.  Available as ZERO VOC, 1.5% water based solution.
  • Product short description goes here.
  • Modified carboxylate.  Excellent detergency, hydrotrope for nonionic surfactants in alkaline systems.  For use at 1-3% in formulations containg 20% active caustic.
  • Dispersant for universal colorants for architectural applications and water based systems.  Recommended for all types of pigments including transparent iron oxides.  Does not need to be pre-neutralized.

Title