-
Bio based grinding agent and carrier for carbon black. Based on polymeric blend of triglycerides and surfactants. This product can be used as grinding agent for carbon black and a carrier for pigment pastes. Cost effective, increased milling speeds and cb loading.
-
CIMSIL G30 is an attapulgite based additive specifically developed to modify rheology of wet and dry joint compounds and adhesives. CIMSIL G30 is a rheological additive fully inert and compatible with most common binders either organic or inorganic being particularly effective in highly viscous filling pastes as joint compound for drywall or plasterboards. CIMSIL G30 improves the following properties: • Sag resistance. • Workability. • Improves spreading and pumpability. • Decreases bleed and segregation during storage. • Gives homogeneity to the finish product. • Improves consistency and viscosity under high electrolyte concentration. CIMSIL G30 is a shear thinning additive what allows the right application on the wall while strongly improves sag resistance of the compound before drying or setting. It is normally combined with cellulose ethers showing a good compatibility with them and also with other organic thickeners.It can be also used in cement mortars and other cement based systems in order to provide shear thinning properties. Fields of application • Wet and dry Joint fillers. •S packle compounds. • Crack fillers & mastics. • Sealants.
-
Low dust self dispersing rheological additive for mortar and concrete, improving properties in fresh and hardened state. Properties CIMSIL A55 G is a chloride-free thixotropic additive specifically developed to act as an anti-sagging/antislipping agent, CIMSIL A55 G fully develops its rheological properties by activation in the presence of cement or gypsum. It improves workability and visual finish in the systems to which it is incorporated. It is a low dust granular additive designed to provide high efficiency suspension properties.CIMSIL A55 G gives mortar, plaster and concrete the following properties:• Thixotropy • Workability • Improves adherence to the substrate • Improves pumpability • Avoids both tile slipping and mortar sagging • Decreases bleed and segregation • Gives homogeneity and cohesiveness to the finish product • Improves the surface finishCIMSIL A55 G is a thixotropic additive developed to be used in water-based compositions where electrolytes are present. It is a low dust granular additive designed to provide high efficiency suspension properties.Field of Application• Rendering mortars • Tile adhesive mortars • Waterproof mortars • Filling mortars • Self-levelling mortar • Repairing mortars • Pumpable concrete • Decorative concrete • Precasted concrete
-
Rheology modifier for mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Properties CIMSIL A55 is a chloride-free thixotropic additive specifi cally developed to act as an anti-sagging/anti-slipping agent, CIMSIL A55 fully develops its rheological properties by activation in the presence of cement or gypsum. It improves workability and visual fi nish in the systems to which it is incorporated. CIMSIL A55 gives mortar, plaster and concrete the following properties: • Thixotropy • Workability • Improves adherence to the substrate • Improves pumpability • A voids both tile slipping and mortar sagging • Decreases bleed and segregation • Gives homogeneity and cohesiveness to the finish product • Improves the surface finish Fields of applications • Pumpable concrete • Decorative concrete • Precasted concrete • Rendering mortar • Tile adhesive mortar • Waterproof mortar • Fill-in mortar • Self-levelling mortar • Repair mortar • Gypsum-based spray plaster • Gypsum-based thin layer plaster • Gypsum-based adhesive plaster Dosage Dosage of CIMSIL A55 varies according to the type of application. However, dosages between 0.25 and 1%, referred to the weight of the cement are recommended.
-
Powdered additive that modifies the rheology of mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Cimsil A35 is a thixotropic additive specially developed to act as an anti-sagging / anti-slipping agent, improving workability and visual finish in the systems to which it is incorporated. Cimsil A35 gives mortar, plaster and concrete the following properties:
- Workability
- Thixotropy
- Decreases bleed and segregation
- Gives homogeneity and cohesiveness to the finished product
- Improves adherence to the substrate
- Improves pumpability
- Avoids both tile slipping and mortar sagging
- Improves the surface finish
- Pumpable concrete
- Decorative concrete
- Precasted concrete
- Rendering mortar
- Tile adhesive mortar
- Waterproof mortar
- Fill-in mortar
- Self-levelling mortar
- Repair mortar
- Gypsum-based spray plaster
- Gypsum-based thin layer plaster
- Gypsum-based adhesive plaster
-
Cardolite Ultra LITE 2020is a low viscosity, solvent-free multipurpose resin modifier designed for use in coatings, adhesives, and other applications. The long hydrophobic aliphatic side chain of the cardanol molecule gives this product a very low viscosity and provides excellent early water resistance and corrosion protection. Used as an epoxy diluent, high viscosity solvent or solvent free formulations can achieve enhanced workability and higher solids without sacrificing other performance properties using this product. This product also has the ability to react and be used in alkyds, urethanes, and acrylics. Cardolite UltraLITE 2020 was designed as a formulation tool to reduce VOC levels and viscosity of coating and adhesive systems. Although higher in viscosity than some other modifiers, the structure of this product gives excellent dilution efficiency to help rapidly reduce viscosity for improved pigment wetting, flexibility, and general application properties. Physical properties such as water resistance, corrosion protection, color stability, chemical resistance, and gloss are not significantly compromised with the addition of Ultra LITE 2020, and the product can be added in on either component side of multi-part formulations. ADVANTAGES • Lowers viscosity while maintaining performance • Preserves chemical and water resistance • Good dilution effect • Adds flexibility • Reduces high shear • Compatible and usable in a variety of coating chemistries•Improves pigment wetting • Reacts with urethanes, alkyds, and acrylic resin • Low volatility and high flash point • Non-toxic • Based from natural, renewable,non-food raw material feedstock
-
A reactive epoxy diluent based on CNSL (biobased). This renewable diluent exhibits very low color, visc reductions, hydrophobicity and flexibility. Viscosity reduction similar to glycidyl ethers (C12-C14 types) and faster cure times at room temp and low temperatures.
-
Nonreactive resin modifier with a viscosity of 40-100 cPs. Color gardner of 1.
-
Cardolite Ultra LITE 2009SF is a very light color and undiluted phenalkamine curing agent suitable for epoxy coatings applications.
