-
Organically modified polyalkyl polysiloxane AFCONA –2280 is a very effective defoamer and air-releaser for solvent-based and solvent-lesssystems. AFCONA –2280is a silicone-based product developed to produce rapid de-aeration for pigmented and mat finish of wood coatingin NC,AC and PU.For high gloss and transparent wood coating,It may cause some in can haziness when the dosage ishigher than 0.50% in PU and AC system. It’s also suitable for polyurethane and epoxy compounds used in flooring or general industrial application.AFCONA –2280also acts as a very good levelling agent,giving a smooth surface to the coating.It functions differently from AFCONA 2722 asthe siliconecontent is higher and the real active ingredient as defoamer is also higher.
-
Organically modified Polysiloxane Water based defoamer and anti-foam, especially for micro foams AFCONA-2505 is an organically modified polysiloxane which designed to give good defoamer and anti-foam in all water based coating. It has excellent performance against micro foam.AFCONA –2505 have below performance and properties:1)It has very good performance in high shear application. Under high shear environment such as long period of grinding, it still can maintain it good defoaming and anti-foam performance. Thus verysuitable to use as defoamer in pigment concentration preparation and high speed flexo printing process.2)It also effective as defoamer in normally coating ranging from PU dispersion to normal acrylic based decorativepaint.3)Beside good defoaming and anti-foam properties, it also has excellent performance against microfoams.4)It has low sensitivity against crater formation.
-
Organically modified Polysiloxane with hydrophobic silica Water based defoamer that suitable for clear coating and pigment concentrate preparation AFCONA- 2507 is an organically modified polysiloxane with hydrophobic silica which designed to give excellent performance in defoamer and anti-foam in all water based coating. AFCONA – 2507 have below performance and properties: 1) Suitable to eliminate process foams in PUD and polyarylic emulsion resins system. 2) Gives good shear force resistance. Suitable for pigment concentrate preparation and defoamer for printing ink systems. 3) It has low sensitivity against crater formation
-
Solution of a silicone modified polymer Effective defoamer for water-based coating systems with a good relation between defoaming and compatibility. An effective defoamer and deaerator. Prevents the formation of foam and blisters during manufacturing and application. It has a very good compatibility compared with good defoaming and deaeration properties and therefore it is very suitable for clear coat applications Very universal in use. Recommended for most of the water-based systems, especially clear applications. For use in grinding/mill bases AFCONA-2502 or AFCONA-2503 are better options. Can then be used as a post-additive.
-
Silicone containing defoamer in emulsion form for water-based system. AFCONA –2592is an effective defoamer for all kind of water-based systems. AFCONA –2592 can be used in high shear force process, and will not influence the property of performance. It also can be easily moved to the surface and destroy the surface air-bubbles in high viscosity systems. Especially suited for airless spray and roller to destroy small blister. AFCONA –2592 is recommended for below systems: 1) All water-based industrial paints 2) Water-based inks 3) Water-based pigment concentrates
-
Polyacrylic polymer Leveling and flow control agent for solvent based coatings with anti-crater properties. AFCONA –3258 has been developed to replace fluorocarbon modified leveling agents, providing the same leveling and anti-crater performance. It is the 100% active version of AFCONA –3758. AFCONA –3258 is a specially modified polyacrylic polymer. It reduces drastically surface tension of organic coating systems. This, together with good compatibility in most solvent-based systems and with minimal foam stabilizing effect, makes it very effective as an anti-crater and flow control agent for all solvent based coating. The leveling and anti-crater performance of AFCONA –3258 can be further improve by combining with AFCONA silicone containing or fluorocarbon containing leveling agents. It will further improve the leveling, anti-crater and substrate wetting properties. AFCONA-3258 is especially suitable for: 1) stoving enamels based on alkyd, acrylic and polyesterresins 2) polyurethanecoatings 3) two-pack epoxycompounds 4) thermoplastic system like NC, TPA andCAB 5) UVcoating
-
Fluorocarbon modified polymer Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA –3277 is the100% active ingredient version of AFCONA –3777. Thus, it has similar performance as AFCONA –3777 in the same solid content form. AFCONA-3277 is a fluorocarbon modified polyacrylic. It can serve as non-silicone leveling agent, where silicone is not permitted due to intercoat adhesion problems. However, we highly recommend the usage of combination with a suitable Polysiloxane for better overall performance, if silicones are permitted. If the requirements are to solve problems caused by high surface tension or to bring down the surface tension strongly, AFCONA-3700 will be a better choice. AFCONA-3700 is also nearly 100% active and due to the higher fluorocarbon content more effective with a lower dosage. AFCONA -3700 has better compatibility properties than AFCONA-3277. However, the foam stabilizing effect is slightly higher. AFCONA-3277: 1) improves levelling 2) prevents cratering 3) helps substrate wetting 4) acts as a defoamer and de-aeration aid 5) does not interfere with intercoat adhesion AFCONA –3277 is recommended for all solvent-based and high solid systems. Due to AFCONA –3277 do not contain any solvent, it very suitable to use in high solids and solvent-free systems like UV, epoxy, polyurethane, PMMA flooring etc.
-
Organically modified polysiloxane for aqueous systems. Silicone based leveling, substrate wetting and anti-crater agent for aqueous coatings & inks without influent of inter-coat adhesion. AFCONA –3588 is a special designed polyether modified polysiloxane. It moves very fast in defective part of coatings, and can decrease the surface tension easily, and it has good compatibility properties. Hence, it is very effective in below properties for any water based systems: 1) Excellent anti-crater behavior. 2) Improved leveling. 3) Fast & better substrate wetting. 4) No inter-coat adhesion problems. 5) Little or no foam stabilization.
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
