-
FUNCTION Ready-to-use, liquid-form and organic corrosion inhibitor for ferrous metals and non-ferrous alloys based on aluminium, magnesium, copper, zinc or nickel. Can be used in low acid-to-alkaline aqueous solutions. APPLICATION Mainly used in : • Aqueous cleaners or paint removers in contact with metal substrates ; • Maintenance products or renovators for light metals (polish, de-icing fluids, leak dectectors,…) ; • Metallic waterborne coatings formulations containing aluminium pigments/flakes. FEATURES • Fully water-soluble liquid • Non-foaming • VOC-free • Non-flammable • Stable in hard waters • Free of bore, molybdate, silicate or nitrite • Exclusively made from authorized substances for food-contact cleaners*
-
BIOTREND® ZP + is a industrial preservative containing the active ingredient Zinc Pyrithione. Zinc Pyrithione is used to prevent microbial degradation and deterioration of manufacturing starting materials such as plastics, polymers, and latexes, and in a wide range of finished articles made from these starting materials. The chemical acts to prevent the growth of bacteria, fungi, mildew, and algae that can cause various types of deterioration such as discoloration, staining, odors, etc.
-
Ready-to-use, liquid-form antiflash-rust additive for all waterborne coatings. Hydrophobic agent protecting almost dry films under severe conditions of ambient humidity. Corrosion inhibitor for metal packaging protection. APPLICATION Any type of waterbone paint or coating, neutral or alkaline, for professional or do-it-yourself uses : • Paints • Thick-coatings • Varnishes • Stains • Mastics • Glues... FEATURES • Ready-to-use aqueous liquid • VOC-free • Does not cause coating’s water sensitivity • Usable in labelled* paints • Usable on ferreous and galvanized steel substrates • Compatible with a wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds
-
Ready-to-use, liquid-form flash-rust inhibitor for any waterborne coating. Corrosion inhibitor for metal packaging protection. APPLICATION Any type of waterbone paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself use : • Paints • Thick-coatings • Varnishes • Stains • Mastics • Glues... FEATURES • Ready-to-use aqueous liquid • VOC-free • Improves coating’s water resistance • Usable for ferrous and galvanized steel substrates • Compatible with a very wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds, …)
-
Ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. Corrosion inhibitor for metal packaging protection. • Ready-to-use aqueous liquid • VOC-free • Doesn’t lead to water sensitivity of the coating • Usable for ferrous and galvanized steel substrates • Compatible with a very wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds, …)
-
Ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. Hydrophobic agent protecting the almost dry film under severe conditions of ambient humidity. Corrosion inhibitor for metal packaging protection. Ready-to-use aqueous liquid • VOC-free • Doesn’t lead to water sensitivity of the coating • Usable for ferrous and non-ferrous metals (aluminium, copper, zinc, brass) • Compatible with a very wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds, …)
-
Ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. Hydrophobic agent protecting the almost dry film under severe conditions of ambient humidity. Corrosion inhibitor for metal packaging protection. • Ready-to-use aqueous liquid • voc-free • Doesn’t lead to water sensitivity of the coating • Contains bio-based substances • Usable for ferrous and galvanized steel substrates • Compatible with a very wide range of binders (acrylics, styrene-acrylic, epoxy, PU, alkyds, …)
-
Antiflash- Rust inhibitor for ferrous and non ferrous substrates. This is a ready to use, liquid form antiflash inhibitor for any water based coatings. This product is VOC free, does not cause water sensitivity, and is compatible with a wide range of binders.
-
INCI name: polyquaternium-22 Acrylamide free, amphoteric conditioner. Anti stat and conditioning for hair and skin care applications. This range of products is parabens and preservative free.
-
Appearance: clear to slightly yellow liquid Solids: 32% pH: 12-13 lbs per gallon: 10.2 Solvent: water
-
Colloidal silica acrylic sealer
-
Bio based grinding agent and carrier for carbon black. Based on polymeric blend of triglycerides and surfactants. This product can be used as grinding agent for carbon black and a carrier for pigment pastes. Cost effective, increased milling speeds and cb loading.
-
Neutral dispersion of 20 nm colloidal silica (30%) in water. This product can be used in investment casting, polishing, metal surface treatment and catalyst binder applications. The silica has been surface treated for improve stability at low and mid range pH.
-
PANGEL CS 610 is a pozzolanic additive based on colloidal silica with very fine (7 nanometers) and narrow particle size distribution. Its rapid surface penetration leads to very fast bonding with calcium hydroxide [Ca(OH)2] which provides an outstanding densifier/hardener effect. PROPERTIES • PANGEL CS 610 reacts with calcium hydroxide in the concrete matrix to create additional calcium silicate hydrates (C-S-H). • PANGEL CS 610 provides a harder and more uniform surface making it withstand abrasion and take a better polish effect. • Due to its unique structure, PANGEL CS 610 works as densifier/ hardener in concrete flooring applications providing better overall mechanical performance (surface hardness, compressive strength, permeability and abrasion resistance ) thus replacing other silicate densifiers. PANGEL CS610 provides tangible benefits and savings vs. other silicate based (i.e. sodium, potassium, lithium) densifiers: • Reduces operating costs by increased ease of maintenance and cleaning • Speed of application; no overnight curing • Deeper penetration • Faster reacting • Safe to handle liquid – lower pH than silicates • Reduces dusting, efflorescence and ASR • Compatible with colored concrete, stains and dyes • No whitening potential; no caustic gel to scrub off • Non-hazardous. Water-based, low odor
-
PANGEL RMA series is managing rheology on demand, improving cohesion, reducing bleeding and segregation and enhancing concrete pumping operations. PANGEL RMA 400 series are high performance liquid concrete admixtures based on silicates modified and specifically developed for shotcrete. PANGEL RMA 400 series increase sprayed concrete cohesion providing superior bond to rock substrate, faster early strength development and enhancing sprayability and pumpability properties, minimizing the rebound and allowing larger thickness build-up in a single pass in tunnels and mining applications. PANGEL® RMA 400 series is specially developed for underground: • Temporary and permanent rock support in mining and tunneling • Slope stabilization • Grouting FEATURES & BENEFITS • Reduces/ replaces silica fume/ microsilica • Enhances sprayability properties • Reduces rebound reducing materials waste • Increases thickness build-up in single pass • Increases very early strength • Safer, healthier reducing dust generation • Increases mix design robustness allowing moisture and grading tolerances PANGEL RMA 400 series increase concrete cohesion developing faster early strength without affecting other concrete plastic properties (slump life, air control management) and enhancing pumpability.
-
CIMSIL G30 is an attapulgite based additive specifically developed to modify rheology of wet and dry joint compounds and adhesives. CIMSIL G30 is a rheological additive fully inert and compatible with most common binders either organic or inorganic being particularly effective in highly viscous filling pastes as joint compound for drywall or plasterboards. CIMSIL G30 improves the following properties: • Sag resistance. • Workability. • Improves spreading and pumpability. • Decreases bleed and segregation during storage. • Gives homogeneity to the finish product. • Improves consistency and viscosity under high electrolyte concentration. CIMSIL G30 is a shear thinning additive what allows the right application on the wall while strongly improves sag resistance of the compound before drying or setting. It is normally combined with cellulose ethers showing a good compatibility with them and also with other organic thickeners.It can be also used in cement mortars and other cement based systems in order to provide shear thinning properties. Fields of application • Wet and dry Joint fillers. •S packle compounds. • Crack fillers & mastics. • Sealants.
-
Powdered additive that modifies the rheology of mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Cimsil A35 is a thixotropic additive specially developed to act as an anti-sagging / anti-slipping agent, improving workability and visual finish in the systems to which it is incorporated. Cimsil A35 gives mortar, plaster and concrete the following properties:
- Workability
- Thixotropy
- Decreases bleed and segregation
- Gives homogeneity and cohesiveness to the finished product
- Improves adherence to the substrate
- Improves pumpability
- Avoids both tile slipping and mortar sagging
- Improves the surface finish
- Pumpable concrete
- Decorative concrete
- Precasted concrete
- Rendering mortar
- Tile adhesive mortar
- Waterproof mortar
- Fill-in mortar
- Self-levelling mortar
- Repair mortar
- Gypsum-based spray plaster
- Gypsum-based thin layer plaster
- Gypsum-based adhesive plaster
-
Rheology modifier for mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Properties CIMSIL A55 is a chloride-free thixotropic additive specifi cally developed to act as an anti-sagging/anti-slipping agent, CIMSIL A55 fully develops its rheological properties by activation in the presence of cement or gypsum. It improves workability and visual fi nish in the systems to which it is incorporated. CIMSIL A55 gives mortar, plaster and concrete the following properties: • Thixotropy • Workability • Improves adherence to the substrate • Improves pumpability • A voids both tile slipping and mortar sagging • Decreases bleed and segregation • Gives homogeneity and cohesiveness to the finish product • Improves the surface finish Fields of applications • Pumpable concrete • Decorative concrete • Precasted concrete • Rendering mortar • Tile adhesive mortar • Waterproof mortar • Fill-in mortar • Self-levelling mortar • Repair mortar • Gypsum-based spray plaster • Gypsum-based thin layer plaster • Gypsum-based adhesive plaster Dosage Dosage of CIMSIL A55 varies according to the type of application. However, dosages between 0.25 and 1%, referred to the weight of the cement are recommended.
-
Rheological Additive HIGH PURITY SODIUM BENTONITE-BASED PANGEL M90F is a high purity smectite-based additive with a selected particle size, specially developed to modify the rheology of joint compounds, plasters and fillers formulated in both powder and paste. PANGEL M90F is recommended where a fine particle size is required. PANGEL M90F can be used also as a binder agent of organic and inorganic powders. Its elevated swelling capacity in contact with water permits it to break apart easily while maintaining elevated resistance when dry.
-
ROFOB PY K 2R, it’s brand new universal water repellent agent specifically designed to be a fluorine and silicone free fabric treatment polymer for textile formulations. Applications in cotton, synthetic and blended materials water repellent finishing. Camping materials and cotton tarpaulins -included its blends with synthetic fiber- water column resistant finish. ROFOB PY K-2R may be added to bath together with any usual synthetic resins of high quality finishing, as well as based on polyvinyl alcohol (PVA) handle modifiers. In the same way, it may be combined with fungicides, respecting the ionicity. Properties:
- Excellent water repellent effect.
- Not oil repellency.
- Excellent durability.
- Fluorinate free.
- High water column resistance.
- Excellent application properties.
- Smooth and soft handle.
- No color brightness loose.
-
NexSil 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required.
-
NexSil 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required.
-
DePHOS 8028 is an 80% active potassium salt of an organic phosphate ester with moderate foaming properties. APPLICATIONS: • Low foam alkaline and acid cleaners • Scouring agents • Synthetic cooling and cutting fluids • Corrosion inhibitor in aerosol can formulations • Emulsion cleaners • Textile wetting agent • Dry cleaning detergents • Pigment dispersant